nVent ESSH9030 - Solar Shield Top, fits 900x300mm, Gray, Aluminum
nVent

ESSH9030

UPC: 783510373894

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent HOFFMAN Solar Shield Top (ESSH9030) is a high-performance, vented top shield designed to mitigate the effects of solar radiation on outdoor electrical and electronic enclosures. Engineered for compatibility with 900x300mm enclosures, this gray aluminum shield provides dual functionality: it significantly reduces temperature rise within the enclosure while acting as a drip shield to protect the door sealing surface from moisture ingress. Backed by nVent's extensive research and testing, the Solar Shield Top delivers a proven 25% reduction in temperature rise due to solar heat load, making it an essential component for maintaining optimal performance and longevity of sensitive equipment in harsh outdoor environments. Outdoor electrical and electronic enclosures are constantly exposed to solar radiation, which can lead to excessive heat buildup and potential system failures. The Solar Shield Top addresses this challenge by creating a ventilated barrier that deflects direct sunlight while allowing heat to dissipate naturally. This vented design ensures compliance with enclosure ratings, including NEMA and IP standards, without compromising airflow or protection. The shield's drip edge further enhances reliability by preventing water from seeping into the enclosure through the door gasket, reducing the risk of corrosion, electrical shorts, and component degradation. Industries that rely on outdoor enclosures—such as telecommunications, utility, renewable energy, and industrial automation—benefit significantly from the Solar Shield Top's thermal management and moisture protection capabilities. Telecommunications providers, for example, deploy these shields on base station enclosures to prevent overheating of sensitive networking equipment, while utility companies use them to protect control panels in solar farms and substations. The shield's compatibility with standard enclosure sizes and its inclusion of mounting hardware simplify installation, making it a cost-effective upgrade for both new and existing systems. nVent HOFFMAN, a trusted name in thermal management and enclosure solutions, has established itself as a leader in mitigating solar heat gain through rigorous testing and innovation. The company's research demonstrates that top-mounted solar shields are among the most effective and economical solutions for reducing solar heat load in outdoor applications. By choosing the ESSH9030 Solar Shield Top, engineers and facility managers gain a durable, low-maintenance solution that extends the lifespan of critical equipment while ensuring uninterrupted operation. The shield's gray aluminum construction offers excellent corrosion resistance and structural integrity, ensuring long-term performance in diverse environmental conditions. Installation is straightforward, with pre-drilled holes and included hardware for secure attachment to the enclosure top. The vented design maintains the enclosure's IP rating while allowing for passive cooling, and the shield's modular construction ensures easy removal for maintenance or upgrades. For professionals seeking to enhance the reliability of outdoor enclosures, the nVent HOFFMAN Solar Shield Top (ESSH9030) provides a proven, field-tested solution that delivers measurable thermal and moisture protection benefits.
  • Solar Shield Top provides a vented area on top of the enclosure to absorb solar heating effects and help keep enclosure cool
  • Provides a drip shield to keep liquids away from the door sealing surface
  • Includes mounting hardware
  • Shielding Effectiveness nVent HOFFMAN's research of the effects of solar radiation on enclosures has shown the positive benefits of utilizing shielding to decrease temperature rise
  • Shielding has been found to be an effective, low-cost method of reducing solar heat gain in outdoor electrical/electronic applications
  • Test results indicate that a top-mounted solar shield provides a 25 percent reduction in temperature rise due to solar heat load

Specifications

Application
Datacom and Telecom Equipment
Color
Light Gray
Color
Gray
Color
Grey
Color Code
RAL 7035
Finish
Gray;Powder Coating
Finish
Powder Coated
Fits
Opening 12 x 2.5 in. or up to 12 x 5 in. with quantity 2 overlapping
Fits
900 x 300 mm
Height
35.43 in
Material
Aluminum
Modification Services
Yes
Product Family
ComLine
Series
HOFFMAN Solar Shield
Series
Solar Shield Top, COMLINE
Size
900x300mm
Thickness
0.08
Thickness
2
Thickness
2 mm
Type
Networking Accessories
Weight
8.6 lb
Width
11.81 in
Width
8.9
Package Dimensions (L x W x H)
38 IN x 14 IN x 3.75 IN
Package Dimensions (L x W x H)
96.52 cm x 35.56 cm x 9.525 cm
Package Weight (Imperial)
8.600 L
Package Weight (Metric)
3.901 kg
Ethernet SHDSL Extender

DDW-120

Ethernet SHDSL Extender
Fiber cable ODC to SC duplex - 670mm

Fiber cable ODC SC Duplex 670mm

Fiber cable ODC to SC duplex - 670mm
Power supply for DIN-rail

PS-60

Power supply for DIN-rail
DIN Rail ? DIN 35

ARH 1656

DIN Rail ? DIN 35
Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .

ST4803PDGM

Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included

3085

Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
Cable Manager, fits 19-inch open rack, Black, Steel

ECK19H

Cable Manager, fits 19-inch open rack, Black, Steel
ON OFF SPST Nickel Pull Chain with Cord

75102CW

ON OFF SPST Nickel Pull Chain with Cord
6U PERF PANEL

PPFS19010BK

6U PERF PANEL
This TX6A 10Gig Cat 6A STP Patch Cord is a 12-Meter, Int'l Grey cord constructed of 26 AWG, shielded, twisted pair, stranded, CM/LSZH cable and with high-performance modular plugs. Its tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. The slender strain relief boot provides easy access in high-density applications. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

STP6X12MIG

This TX6A 10Gig Cat 6A STP Patch Cord is a 12-Meter, Int'l Grey cord constructed of 26 AWG, shielded, twisted pair, stranded, CM/LSZH cable and with high-performance modular plugs. Its tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. The slender strain relief boot provides easy access in high-density applications. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL

F62ERLNSNSNM002

OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.

CESUM3-C15

Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.