Authorized nVent Distributor
nVent EBU1MXSWSLE - Hazloc Cable Glands for Non-Armored Cable (Ex d/e/tb),Stainless Steel,M20x1.5

nVent EBU1MXSWSLE Hazloc Cable Glands for Non-Armored Cable (Ex d/e/tb),Stainless Steel,M20x1.5

UPC: 783510306441

Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent EBU1MXSWSLE (SKU: EBU1MXSWSLE) is a 316L stainless steel hazardous location cable gland designed for non-armored cables. It offers robust protection for Ex d (flameproof), Ex e (increased safety), and Ex tb (dust) applications. Engineered with a silicone seal, it provides an operating temperature range of -60°C to 130°C. This gland features three levels of removable seals, allowing for a wide clamping range to accommodate various cable diameters. Its M20x1.5 metric thread ensures straightforward installation into standard enclosures. The EBU1MXSWSLE is certified to ATEX and IEC standards, including IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, and IEC/EN 60079-31, making it suitable for Zone 1 and 2 (Gas Group IIC) and Zone 21 and 22 (Dust Group IIIC). It also holds UL Listing No: E474828 for Class I, Zone 1, AEx e IIC and Class I, Zone 2, AEx e IIC, and Zone 22, AEX tc IIIC hazardous locations. Ingress protection is rated at IP66/68. All metric thread cable glands are supplied as kits, including a chloroprene washer, locknut, and earth tag for complete installation. Applications include oil and gas, chemical processing, pharmaceuticals, and mining industries where explosive atmospheres may be present.
  • Suitable for non-armored cables in flameproof (ex d), increased safety (ex e) and dust (ex tb) applications
  • Allow for a wider clamping range in a single gland with 3 levels of removable seals
  • All metric thread cable glands are packaged as kits; each kit includes a chloroprene washer, a locknut and an earthtag
  • "All NPT thread cable glands are packaged as kits; each kit includes a locknut and an earthtag (except for NPT 3/8"" cable glands which do not include locknuts or earthtags)"
  • Available in Metric (M) and NPT (N) thread type
  • Operating temperature from -40 C to 80 C with chloroprene seal and -60 C to 80C with silicon seal in Ex d/e/tb application
  • Operating temperature from -40 C to 80 C with chloroprene seal and -60 C to 140 C with silicon seal in Ex e/tb application
  • Operating temperature from -40 C to 80 C with chloroprene seal and -60 C to 140 C with silicon seal in Ex e/tb application

Specifications

Application
Hazardous Environments
Clamping Range
0.16-0.47 in
Clamping Range Diameter
0.16-0.47 in
Clamping Range Diameter
4.0-12.0 mm
Color
Unpainted
Finish
Brushed
IP Rating
IP66/68 (EN60529)
Material
Stainless Steel
Seal
Silicone
Series
EBU1MXSWSLE
Size
M20x1.5
Thread Size
M20 x 1.5
Type
Other Accessories
Weight
0.1 lb
Works With
NEMA / IEC
Package Dimensions (L x W x H)
6.25 IN x 6 IN x 0.75 IN
Package Dimensions (L x W x H)
15.875 cm x 15.24 cm x 1.905 cm
Package Weight (Imperial)
0.100 L
Package Weight (Metric)
0.045 kg
Hazloc Cable Glands for Non-Armored Cable (Ex d/e/tb),Stainless Steel,M16x1.5

EBU01MXSWSLE

Hazloc Cable Glands for Non-Armored Cable (Ex d/e/tb),Stainless Steel,M16x1.5
6" Keyed Padlocking 3-pt Latch less than 60" - Stainless Steel

MHKL2SS

6" Keyed Padlocking 3-pt Latch less than 60" - Stainless Steel
ARCA JIC 24 x 20 x 8 hinged opaque cover, stainless steel latch, padlockable

AR24208CHSSL

ARCA JIC 24 x 20 x 8 hinged opaque cover, stainless steel latch, padlockable
2-1/2" K-O Seal & Gask USA 316SS

2501KOSGSS

2-1/2" K-O Seal & Gask USA 316SS
Pre-Fabricated Floor-Track Vertical Mounting Bracket with Supporting Horizontal Cross Bar, 12 Inch or 18 Inch Height, For 4 Inch Square of 4-11/16 Inch Square Boxes, Deep or Shallow, with Standard Device Covers (Mud Rings)

SV1218

Pre-Fabricated Floor-Track Vertical Mounting Bracket with Supporting Horizontal Cross Bar, 12 Inch or 18 Inch Height, For 4 Inch Square of 4-11/16 Inch Square Boxes, Deep or Shallow, with Standard Device Covers (Mud Rings)
This is a 24" electrical box mounting bracket that mounts a 1-1/2" electrical box to studs on 24" centers. It is made of pre-galvanized steel. The finish/color is silver.

BMB24

This is a 24" electrical box mounting bracket that mounts a 1-1/2" electrical box to studs on 24" centers. It is made of pre-galvanized steel. The finish/color is silver.
6x6x3 Polycarbonate Enclosure NEMA 6P | Standard Hinge | Clear Lid | Integrated Locking Latch | Intergrated Mounting Flange

P6063C

6x6x3 Polycarbonate Enclosure NEMA 6P | Standard Hinge | Clear Lid | Integrated Locking Latch | Intergrated Mounting Flange
SET OF 2 CABLE ENTRY BRUSH FOR CADRYS DELTA WIDTH 800 MM

51120096

SET OF 2 CABLE ENTRY BRUSH FOR CADRYS DELTA WIDTH 800 MM

How to Install the EBU1MXSWSLE Cable Gland

This guide provides step-by-step instructions for installing the EBU1MXSWSLE cable gland, ensuring a secure and safe connection for electrical installations.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Torque wrench

Supplies needed:

Mounting screws, Cable connectors, Sealing rings

  1. Disassemble the cable gland

    Hold the assembled gland straight and disassemble the parts labeled A, B, C, D, and E. Choose the optimal seal combination according to the cable diameter.

  2. Assemble the seal combination

    Assemble the chosen seal combination inside part A. Mount parts A, C, and D onto the enclosure using sufficient torque values.

  3. Insert the cable

    Insert the cable into the gland for installation. Ensure the cable is properly seated and tighten part E to parts A, C, and D with sufficient torque.

  4. Verify installation

    Check that all components are securely fastened and that the cable is clamped effectively to prevent pulling or twisting.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.