Authorized nVent Distributor
nVent CR430826G038 - ProAir Harsh Environment Indoor/Outdoor 4X CR43, 8000BTU 230V, Brushed, SS304

nVent CR430826G038 ProAir Harsh Environment Indoor/Outdoor 4X CR43, 8000BTU 230V, Brushed, SS304

UPC: 783510193164


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent ProAir CR430826G038 is a harsh environment air conditioner designed for corrosive indoor/outdoor applications. This unit provides 8000 BTU/h (2353W nominal capacity) of cooling at 230V, operating on a single phase. The operating temperature range is -40°F to 131°F (-40°C to 55°C), with an optional low-ambient package. Key features include a hinged front cover for easy maintenance access to components and a cleanable, reusable aluminum mesh filter. The unit utilizes a robust reciprocating compressor and high-performance fans. Dimensions are 23 inches in height, 10 inches in width, and 8.75 inches in depth, with a weight of 64 lbs. This model is suitable for protecting components in corrosive environments where standard cooling units would fail, offering reliable thermal management for industrial control panels, electrical rooms, and outdoor enclosures.
  • Easy maintenance: hinged front cover allows quick access to all components; condenser coil can be cleaned while unit is still mounted to the cabinet
  • Smooth surface with minimal use of visible fasteners
  • Cleanable reusable aluminum mesh filter protects coils for maximum cooling performance
  • Operating temperature range from -40 F/-40 C to 131 F/55 C (with optional low-ambient package)
  • Reliable mechanical thermostat located behind the filter of the unit
  • Robust reciprocating compressor
  • Low-carbon mild-steel sheet-metal cover for rugged factory and outdoor environments
  • High-performance fans and blowers designed for densely packed enclosures
  • Easy-mount flanges for simple installation
  • Every unit functionally tested before shipping

Specifications

Amperage Rating
4.9;5.0 A;A
Amperage Rating
4.9/5.0 A
Application
Controls and Drives;Corrosive Environments;Hygienic Environments;Power Distribution
Application
Hygienic Environments; Power Distribution; Corrosive Environments; Controls and Drives
Btu Rating
8,000
Color
Brushed
Color
Gray
Color
Unpainted
Depth
10.25 in
Depth
260 mm
Finish
Brushed #3
Frequency
50/60 Hz
Frequency Rating
50/60 Hz
Frequency Rating, Maximum
60 Hz
Frequency Rating, Minimum
50 Hz
Height
43.31 in
Height
1,100 mm
Housing Material
Stainless Steel
Material
SS304
Material
Stainless Steel 304
Max Current
5 A
Mechanical Advantage
Stainless steel optional
Model
Surface Mounted
Mounting Type
Wall-mount or Standalone
NEMA Rating
4X Watertight, corrosion-resistant
Nema Rating
NEMA 4X
Nominal Capacity Btu/h
8,000 Btu/h
Nominal Capacity Watts
2,344 W
Nominal Voltage
230 V
Number Of Phases
1
Operating Temperature
-40-55 °C
Operating Temperature
-40-55
Operating Temperature
-40-131 °F
Operating Temperature
131 deg F
Outdoor Installation
No
Power
958/1182 W
Product Family
ProAir
Protection Rating
NEMA Type 4X
Refrigerant
R513A
Remote Access Control
No
Series
ProAir CR43
Size
8000BTU
Thickness
18 ga
Thickness
1.21 mm
Thickness
51.40mm (2.024")
Type
Air Conditioners
Voltage AC
200-250 V
Voltage Rating
230 VAC
Voltage Rating
230 V
Weight
57 kg
Weight
140 lb
Width
400 mm
Width
15.75 in
Package Dimensions (L x W x H)
20.5 IN x 14 IN x 45 IN
Package Dimensions (L x W x H)
52.07 cm x 35.56 cm x 114.3 cm
Package Weight (Imperial)
140.000 L
Package Weight (Metric)
63.504 kg
ProAir Harsh Environment Indoor/Outdoor 4X CR43, 6000BTU 230V, Brushed, SS304

CR430626G034

ProAir Harsh Environment Indoor/Outdoor 4X CR43, 6000BTU 230V, Brushed, SS304
AC Unit 4,000 BTU/H 230 V - NEMA 4x - 304 SS

DTS3181A230N4SS

AC Unit 4,000 BTU/H 230 V - NEMA 4x - 304 SS
DTS 3081 230V 50/60Hz SS304

13382341300

DTS 3081 230V 50/60Hz SS304
InRow RC 300mm Chilled Water

ACRC301S

InRow RC 300mm Chilled Water
G52 12000 BTU 115V 50/60HZ 1ph, Bulletin MCLG (SPECTRACOOL Air Conditioner), Size/Dims: 52.69x17.12x11.66 ex2

G521216G053

G52 12000 BTU 115V 50/60HZ 1ph, Bulletin MCLG (SPECTRACOOL Air Conditioner), Size/Dims: 52.69x17.12x11.66 ex2
SpectraCool Indoor/Outdoor G57, 20000BTU 460V, Lt Gray, Steel

G572046G050

SpectraCool Indoor/Outdoor G57, 20000BTU 460V, Lt Gray, Steel
SpectraCool Outdoor Partial Recess Mount G52, 12000BTU 230V, Lt Gray, Steel

G521226G101

SpectraCool Outdoor Partial Recess Mount G52, 12000BTU 230V, Lt Gray, Steel
SpectraCool Outdoor Partial Recess Mount G52, 8000BTU 115V, Lt Gray, Steel

G520816G101

SpectraCool Outdoor Partial Recess Mount G52, 8000BTU 115V, Lt Gray, Steel

How to Install the CR430826G038 Air Conditioner

This guide provides step-by-step instructions for installing and setting up the CR430826G038 air conditioner, ensuring proper functionality and configuration.

Estimated time: 45m

Tools needed:

Screwdriver, Wrench, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Gasket kit, Terminal connectors

  1. Inspect the air conditioner

    Check the air conditioner for any visible damage and ensure it is functioning properly before installation.

  2. Prepare the enclosure

    Using the cutout dimensions provided in the manual, create the necessary air 'IN' and 'OUT' openings and mounting bolt hole pattern in the enclosure.

  3. Install gaskets

    Apply the gaskets from the gasket kit to the rear of the air conditioner to ensure a proper seal.

  4. Mount the air conditioner

    Secure the air conditioner to the enclosure using the mounting screws and washers. Ensure the unit is upright and allow it to remain in this position for at least five minutes before powering on.

  5. Connect the power supply

    Refer to the nameplate for electrical requirements and connect the power cord to a properly grounded power supply. Avoid using an extension cord.

  6. Test functionality

    Power on the air conditioner and allow it to run for 5 to 10 minutes. Check for excessive noise or vibration and ensure that both the condenser and evaporator blowers are operational.

  7. Adjust temperature settings

    If equipped with a Level I temperature controller, adjust the temperature set point as needed by turning the adjustment screw counter-clockwise to increase and clockwise to decrease the temperature.

  8. Finalize installation

    Ensure all panels are secured and restore power to the air conditioner for normal operation.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.