Authorized nVent Distributor
nVent CR430816G023 - ProAir Harsh Environment Outdoor with Cntr 3R CR43, 8000BTU 115V, Brushed, SS304

nVent CR430816G023 ProAir Harsh Environment Outdoor with Cntr 3R CR43, 8000BTU 115V, Brushed, SS304

UPC: 783510193089


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent ProAir CR43 Harsh Environment Outdoor Air Conditioner (SKU CR430816G023) provides essential thermal management for sensitive equipment in corrosive industrial settings. This unit delivers 8000 BTU cooling capacity on a 115V, 1PH, 50/60 Hz power supply. Constructed from Brushed Stainless Steel 304, it offers superior resistance to corrosion and environmental degradation. Its NEMA Type 3R rating ensures protection against falling rain and sleet, as well as dust ingress. The unit features a hinged door and minimal fasteners for quick maintenance access, allowing condenser coil cleaning while mounted. It includes a cleanable, reusable aluminum mesh filter and a mechanical thermostat. The operating temperature range is -40°F to 131°F (-40°C to 55°C) with an optional low-ambient package. Ideal for protecting control panels and automation equipment in coastal areas, chemical plants, and food processing facilities.
  • Easy maintenance: hinged front cover allows quick access to all components; condenser coil can be cleaned while unit is still mounted to the cabinet
  • Smooth surface with minimal use of visible fasteners
  • Cleanable reusable aluminum mesh filter protects coils for maximum cooling performance
  • Operating temperature range from -40 F/-40 C to 131 F/55 C (with optional low-ambient package)
  • Reliable mechanical thermostat located behind the filter of the unit
  • Robust reciprocating compressor
  • Low-carbon mild-steel sheet-metal cover for rugged factory and outdoor environments
  • High-performance fans and blowers designed for densely packed enclosures
  • Easy-mount flanges for simple installation
  • Every unit functionally tested before shipping

Specifications

Amperage Rating
12.7 A
Application
Controls and Drives;Corrosive Environments;Power Distribution
Application
Corrosive Environments; Power Distribution; Controls and Drives
Btu Rating
8,000
Color
Gray
Color
Unpainted
Color
Brushed
Depth
260 mm
Depth
10.25 in
Finish
Brushed #3
Frequency
50/60Hz
Frequency Rating
50/60 Hz
Frequency Rating, Maximum
60 Hz
Frequency Rating, Minimum
50 Hz
Height
1,100 mm
Height
43.31 in
Housing Material
Stainless Steel
Material
Stainless Steel 304
Material
SS304
Max Current
10.2 A
Mechanical Advantage
Stainless steel optional
Model
Surface Mounted
NEMA Rating
12 Indoor, dust-resistant
NEMA Rating
Type 3R
Nominal Capacity Btu/h
8,000 Btu/h
Nominal Capacity Watts
2,344 W
Nominal Voltage
115 V
Number Of Phases
1
Operating Temperature
-40-55 °C
Operating Temperature
-40-131 °F
Operating Temperature
131 deg F
Operating Temperature
-40-55
Outdoor Installation
No
Poles
1PH
Power
2344 W
Product Family
ProAir
Protection Rating
NEMA Type 12
Refrigerant
R513A
Remote Access Control
No
Series
ProAir CR43
Thickness
1.21 mm
Thickness
18 ga
Thickness
51.40mm (2.024")
Type
Air Conditioners
Voltage AC
100-120 V
Voltage Rating
115 VAC
Voltage Rating
115V
Weight
149 lb
Weight
57 kg
Width
400 mm
Width
15.75 in
Package Dimensions (L x W x H)
17.5 IN x 14 IN x 47.5 IN
Package Dimensions (L x W x H)
44.45 cm x 35.56 cm x 120.65 cm
Package Weight (Imperial)
149.000 L
Package Weight (Metric)
67.586 kg
ProAir Harsh Environment Outdoor with Crsn 3R CR43, 8000BTU 115V, Brushed, SS304

CR430816G010

ProAir Harsh Environment Outdoor with Crsn 3R CR43, 8000BTU 115V, Brushed, SS304
PF-RH-20000-SS

18102000014

PF-RH-20000-SS
AC Unit 2,500 BTU/H 115 V - NEMA 4x - 304 SS

DTS3081A115N4SS

AC Unit 2,500 BTU/H 115 V - NEMA 4x - 304 SS
InRow RC 300mm Chilled Water

ACRC301S

InRow RC 300mm Chilled Water
ProAir Harsh Environment Indoor with Cntr CR43, 8000BTU 230V, Lt Gray, Steel

CR430826G026

ProAir Harsh Environment Indoor with Cntr CR43, 8000BTU 230V, Lt Gray, Steel
ProAir Harsh Environment Outdoor 3R CR43, 8000BTU 230V, Lt Gray, Steel

CR430826G007

ProAir Harsh Environment Outdoor 3R CR43, 8000BTU 230V, Lt Gray, Steel
ProAir Harsh Environment Indoor/Outdoor 4X CR43, 6000BTU 230V, Brushed, SS304

CR430626G034

ProAir Harsh Environment Indoor/Outdoor 4X CR43, 6000BTU 230V, Brushed, SS304
ProAir Harsh Environment Outdoor with Crsn 3R CR43, 8000BTU 230V, Brushed, SS304

CR430826G037

ProAir Harsh Environment Outdoor with Crsn 3R CR43, 8000BTU 230V, Brushed, SS304

How to Install the CR430816G023 Air Conditioner

This guide provides step-by-step instructions for installing the CR430816G023 air conditioner, ensuring proper mounting, wiring, and initial setup.

Estimated time: 45m

Tools needed:

Screwdriver, Wrench, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Gasket kit, Terminal connectors

  1. Inspect the air conditioner

    Check for any visible damage and ensure the unit is functioning correctly before installation. Connect the power cord to a grounded supply and run the unit for 5-10 minutes.

  2. Prepare the enclosure

    Using the cutout dimensions provided in the manual, create the necessary openings for air 'IN' and 'OUT' as well as the mounting bolt hole pattern.

  3. Install the gaskets

    Apply the gaskets from the gasket kit to the rear of the air conditioner to ensure a proper seal when mounted.

  4. Mount the air conditioner

    Secure the air conditioner to the enclosure using the provided mounting bolts and washers. Ensure the unit is upright and allow it to sit for at least 5 minutes before starting.

  5. Connect the power supply

    Refer to the nameplate for electrical requirements and connect the power cord to a properly grounded power supply. Avoid using an extension cord.

  6. Configure the temperature controller

    If applicable, adjust the Level I temperature controller by loosening the front panel screw, turning the adjustment screw to set the desired temperature, and then re-secure the front panel.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.