nVent CR290446G400 ProAir Harsh Environment Indoor CR29, 4000BTU 460V 1PH, Lt Gray, Steel
UPC: 783510223540
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Easy maintenance: hinged front cover allows quick access to all components; condenser coil can be cleaned while unit is still mounted to the cabinet
- Smooth surface with minimal use of visible fasteners
- Cleanable reusable aluminum mesh filter protects coils for maximum cooling performance
- Operating temperature range from -40 F/-40 C to 131 F/55 C (with optional low-ambient package)
- Reliable mechanical thermostat located behind the filter of the unit
- Robust reciprocating compressor
- Low-carbon mild-steel sheet-metal cover for rugged factory and outdoor environments
- High-performance fans and blowers designed for densely packed enclosures
- Easy-mount flanges for simple installation
- Every unit functionally tested before shipping
Specifications
Application | Controls and Drives;Corrosive Environments;Power Distribution |
Application | Power Distribution; Corrosive Environments; Controls and Drives |
Color | Lt Gray |
Color | Light Gray |
Color | Gray |
Color Code | RAL 7035 |
Depth | 8.63 in |
Depth | 219 mm |
Finish | Powder Coated |
Height | 749 mm |
Height | 29.5 in |
Material | Mild Steel |
Material | Steel |
Max Current | 2.5 A |
Mechanical Advantage | Stainless steel optional |
NEMA Rating | 12 Indoor, dust-resistant |
Nominal Capacity Btu/h | 4,000 Btu/h |
Nominal Capacity Watts | 1,172 W |
Nominal Voltage | 460 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 |
Operating Temperature | -40-55 °C |
Operating Temperature | -40-131 °F |
Outdoor Installation | No |
Poles | 1PH |
Product Family | ProAir |
Protection Rating | NEMA Type 12 |
Refrigerant | R513A |
Remote Access Control | No |
Series | ProAir Harsh Environment Indoor CR29 |
Size | 4000BTU |
Size | CR29 |
Thickness | 1.21 mm |
Thickness | 18 ga |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 400-460 V |
Voltage Rating | 400 - 460 VAC |
Voltage Rating | 460 V |
Weight | 58 kg |
Weight | 113 lb |
Width | 400 mm |
Width | 15.75 in |
Package Dimensions (L x W x H) | 17.75 IN x 11 IN x 30.5 IN |
Package Dimensions (L x W x H) | 45.085 cm x 27.94 cm x 77.47 cm |
Package Weight (Imperial) | 113.000 L |
Package Weight (Metric) | 51.257 kg |
CR290426G097
AIR COND, CR29-0426-G097, Bulletin MCL (Air Conditioners - CR29-0426), Size/Dims: 2.00x2.00x2.00, Material: Steel, Finish: GrayCR290416G097
AIR COND, CR29-0416-G097, Bulletin MCL (Air Conditioners - CR29-0416), Size/Dims: 14.00x21.00x33.00, Material: Steel, Finish: GrayCR290426G087
AIR COND, CR29-0426-G087, Bulletin MCL (Air Conditioners - CR29-0426), Size/Dims: 11.00x18.00x30.00, Material: Steel, Finish: GrayCR290416G092
AIR COND, CR29-0416-G092, Bulletin MCL (Air Conditioners - CR29-0416), Size/Dims: 14.00x21.00x33.00, Material: Steel, Finish: GrayCR290426G108
AIR COND, CR29-0426-G108, Bulletin MCL (Air Conditioners - CR29-0426), Size/Dims: 33.00x18.00x12.00, Material: Steel, Finish: GrayHow to Install the CR290446G400 Air Conditioner
Installation guide for mounting and wiring the CR290446G400 air conditioner into an enclosure.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench, Ratchet driver
Supplies needed:
Mounting gasket kit, Mounting bolts, Washers
- Inspect and Test Functionality
Inspect the air conditioner for any damage. Test its functionality before mounting by connecting the power cord to a properly grounded power supply. Ensure the unit has been upright for at least 5 minutes if it was previously in a horizontal position. Do not operate the unit while it is horizontal or on its side. Refer to the nameplate for electrical requirements and ensure the circuit ampacity is at least 125% of the design data. Operate for 5-10 minutes, checking for excessive noise or vibration. The condenser blower, evaporator blower, and compressor should be running, and condenser air should be warmer than room temperature within minutes.
- Prepare Enclosure Openings
Using the cutout dimensions provided in this manual, prepare the air 'IN' and air 'OUT' openings on the enclosure. Also, prepare the mounting bolt hole pattern for the enclosure.
- Install Gasket
Apply the provided gasket from the mounting gasket kit to the rear of the air conditioner. Refer to the 'Mounting Gasket Kit' section for proper location.
- Mount Air Conditioner
Mount the air conditioner onto the enclosure using the provided mounting bolts and washers. Start the bolts by hand to avoid cross-threading, then tighten with a wrench or ratchet driver. Ensure the unit remains upright during operation.
- Connect Power
Refer to the top of the nameplate for electrical requirements. Connect the power cord to a properly grounded power supply. Use of an extension cord is not recommended. The electrical circuit should be fused with a slow blow or HACR circuit breaker. For specific electrical requirements, consult the nameplate or datasheet.
- Adjust Temperature Controller (if applicable)
If the unit is equipped with an automatic temperature controller, it is factory preset. For Level I controllers, disconnect power, loosen the front panel screw, locate the controller, and adjust the set point by turning the screw slot (counter-clockwise to increase, clockwise to decrease). Close the panel and restore power. For Level II and III controllers, refer to the separate programming manual if custom adjustments are needed.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.