Authorized nVent Distributor
nVent CR290426G002 - ProAir Harsh Environment Indoor CR29, 4000BTU 230V, Lt Gray, Steel

nVent CR290426G002 ProAir Harsh Environment Indoor CR29, 4000BTU 230V, Lt Gray, Steel

UPC: 783510742904


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent ProAir Harsh Environment Indoor CR29 air conditioner (SKU CR290426G002) provides essential thermal management for electrical enclosures in challenging indoor environments. This unit delivers 4000 BTU/Hr. of cooling capacity at 95°F ambient and 2800 BTU/Hr. at 131°F ambient, operating on a 230V, 1-phase power supply. It draws 5.9/5.3 Amps at 95°F and 6.7/6.6 Amps at 131°F (50/60Hz). Constructed from light gray steel, it is designed for durability and resistance in corrosive atmospheres. Key features include a hinged front cover for quick access to components and a cleanable, reusable aluminum mesh filter to protect coils. The unit operates within a temperature range of -40°F to 131°F. Its smooth surface and optional hood (sold separately) offer protection against water splashes. Ideal for control panels in chemical processing, wastewater treatment, marine, and food/beverage facilities where standard units would degrade. Dimensions are 29.50" H x 15.75" W x 8.63" D.
  • Easy maintenance: hinged front cover allows quick access to all components; condenser coil can be cleaned while unit is still mounted to the cabinet
  • Smooth surface with minimal use of visible fasteners
  • Cleanable reusable aluminum mesh filter protects coils for maximum cooling performance
  • Operating temperature range from -40 F/-40 C to 131 F/55 C (with optional low-ambient package)
  • Reliable mechanical thermostat located behind the filter of the unit
  • Robust reciprocating compressor
  • Low-carbon mild-steel sheet-metal cover for rugged factory and outdoor environments
  • High-performance fans and blowers designed for densely packed enclosures
  • Easy-mount flanges for simple installation
  • Every unit functionally tested before shipping

Specifications

Amperage Rating
4.9 A
Application
Controls and Drives;Corrosive Environments;Power Distribution
Btu Rating
4,000
Color
Light Gray
Color
Gray
Color Code
RAL 7035
Depth
8.63 in
Depth
219 mm
Finish
Powder Coated
Frequency Rating
50/60 Hz
Frequency Rating, Maximum
60 Hz
Frequency Rating, Minimum
50 Hz
Height
29.5 in
Height
749 mm
Housing Material
Mild Steel
Material
Mild Steel
Max Current
4.9 A
Mechanical Advantage
Stainless steel optional
Model
Surface Mounted
NEMA Rating
12 Indoor, dust-resistant
Nominal Capacity Btu/h
4,000 Btu/h
Nominal Capacity Watts
1,172 W
Nominal Voltage
230 V
Number Of Phases
1
Operating Temperature
131 deg F
Operating Temperature
-40-55
Operating Temperature
-40-131 °F
Operating Temperature
-40-55 °C
Outdoor Installation
No
Phase
1 Ph
Phase
1
Power
1172 W
Product Family
ProAir
Protection Rating
NEMA Type 12
Refrigerant
R513A
Remote Access Control
No
Thickness
51.40mm (2.024")
Thickness
18 ga
Thickness
1.21 mm
Type
Air Conditioners
Voltage AC
200-250 V
Voltage Rating
230 VAC
Weight
100 lb
Weight
54 kg
Width
400 mm
Width
15.75 in
Package Dimensions (L x W x H)
18.75 IN x 11 IN x 30.75 IN
Package Dimensions (L x W x H)
47.625 cm x 27.94 cm x 78.105 cm
Package Weight (Imperial)
100.000 L
Package Weight (Metric)
45.360 kg
ProAir Harsh Environment Outdoor 3R CR29, 4000BTU 230V, Lt Gray, Steel

CR290426G022

ProAir Harsh Environment Outdoor 3R CR29, 4000BTU 230V, Lt Gray, Steel
DTT 6201 230V SC 7035

13256241055

DTT 6201 230V SC 7035
AC Unit 7,500 BTU/H 230 V - NEMA 12 - Lt. Gray

DTS3241A230LG

AC Unit 7,500 BTU/H 230 V - NEMA 12 - Lt. Gray
InRow RC 300mm Chilled Water

ACRC301S

InRow RC 300mm Chilled Water
ProAir Harsh Environment Indoor CR29, 2700BTU 230V, Lt Gray, Steel

CR290226G002

ProAir Harsh Environment Indoor CR29, 2700BTU 230V, Lt Gray, Steel
AC, Side Mtg 230v 50/60Hz, Bulletin MCL (Air Conditioners), Size/Dims: 800/1000 BTU, Material/Finish: Steel/LtGray

M130126G1008

AC, Side Mtg 230v 50/60Hz, Bulletin MCL (Air Conditioners), Size/Dims: 800/1000 BTU, Material/Finish: Steel/LtGray
AC, Side Mtg 115v 50/60Hz, Bulletin MCL (Air Conditioners), Size/Dims: 1500/1800 BTU, Material/Finish: Steel/LtGray

M170216G009

AC, Side Mtg 115v 50/60Hz, Bulletin MCL (Air Conditioners), Size/Dims: 1500/1800 BTU, Material/Finish: Steel/LtGray
AC, Side Mtg 230v 50/60Hz, Bulletin MCL (Air Conditioners), Size/Dims: 1500/1800 BTU, Material/Finish: Steel/LtGray

M170226G004

AC, Side Mtg 230v 50/60Hz, Bulletin MCL (Air Conditioners), Size/Dims: 1500/1800 BTU, Material/Finish: Steel/LtGray

Frequently Asked Questions

What is the cooling capacity of the CR290426G002?

The nVent ProAir CR290426G002 offers 4000 BTU/Hr. at 95°F ambient and 2800 BTU/Hr. at 131°F ambient.

What is the operating voltage for this air conditioner?

The nVent ProAir CR290426G002 operates on a 230V, 1-phase power supply.

What are the dimensions of the CR290426G002?

The dimensions of the nVent ProAir CR290426G002 are 29.50 inches in height, 15.75 inches in width, and 8.63 inches in depth.

What is the maximum ambient operating temperature?

The nVent ProAir CR290426G002 can operate in ambient temperatures from -40°F to 131°F.

What type of filter does this unit use?

The unit features a cleanable, reusable aluminum mesh filter designed to protect the cooling coils.

How to Install the CR290426G002 Air Conditioner

Installation guide for mounting and wiring the CR290426G002 air conditioner into an enclosure.

Estimated time: 45m

Tools needed:

Screwdriver, Wrench, Ratchet driver

Supplies needed:

Mounting gasket kit, Mounting bolts, Washers

  1. Inspect and Test Functionality

    Inspect the air conditioner for any damage. Test its functionality before mounting by connecting the power cord to a properly grounded power supply. Ensure the unit has been upright for at least 5 minutes if it was previously in a horizontal position. Do not operate the unit while it is horizontal or on its side. Refer to the nameplate for electrical requirements and ensure the circuit ampacity is at least 125% of the design data. Operate for 5-10 minutes, checking for excessive noise or vibration. The condenser blower, evaporator blower, and compressor should be running, and condenser air should be warmer than room temperature within minutes.

  2. Prepare Enclosure Openings

    Using the cutout dimensions provided in this manual, prepare the air 'IN' and air 'OUT' openings on the enclosure. Also, prepare the mounting bolt hole pattern for the enclosure.

  3. Install Gasket

    Apply the provided gasket from the mounting gasket kit to the rear of the air conditioner. Refer to the 'Mounting Gasket Kit' section for proper location.

  4. Mount Air Conditioner

    Mount the air conditioner onto the enclosure using the provided mounting bolts and washers. Start the bolts by hand to avoid cross-threading, then tighten with a wrench or ratchet driver. Ensure the unit remains upright during operation.

  5. Connect Power

    Refer to the top of the nameplate for electrical requirements. Connect the power cord to a properly grounded power supply. Use of an extension cord is not recommended. The electrical circuit should be fused with a slow blow or HACR circuit breaker. For specific electrical requirements, consult the nameplate or datasheet.

  6. Adjust Temperature Controller (if applicable)

    If the unit is equipped with an automatic temperature controller, it is factory preset. For Level I controllers, disconnect power, loosen the front panel screw, locate the controller, and adjust the set point by turning the screw slot (counter-clockwise to increase, clockwise to decrease). Close the panel and restore power. For Level II and III controllers, refer to the separate programming manual if custom adjustments are needed.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.