Authorized nVent Distributor
nVent CR230246G400 - ProAir Harsh Environment Indoor CR23, 1600BTU 460V 1PH, Lt Gray, Steel

nVent CR230246G400 ProAir Harsh Environment Indoor CR23, 1600BTU 460V 1PH, Lt Gray, Steel

UPC: 783510194154


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent ProAir CR23 (SKU: CR230246G400) is a 1600 BTU indoor air conditioner designed for harsh environments. Operating on 460V single-phase power, this unit delivers precise thermal management for enclosures, control panels, and junction boxes in industrial settings. Its corrosion-resistant mild steel construction with a light-gray semi-textured powder-coat finish resists moisture, chemicals, and particulate matter, making it ideal for washdown areas, food processing plants, or outdoor-adjacent installations. The unit features a hinged front cover for tool-less access to internal components, including the condenser coil and reusable aluminum mesh filter, enabling quick maintenance without removing the unit from the enclosure. With a compact footprint (23" H x 10" W x 8.75" D) and a weight of 67 lbs, the ProAir CR23 is easy to install using provided mounting flanges and hardware. It operates efficiently across a wide ambient temperature range (-40°F to 131°F) and includes a factory-set mechanical thermostat (80°F/27°C) for reliable temperature control. The unit uses R-134A refrigerant and has a cooling capacity of 1400-1600 BTU/h, with airflow ratings of 117 CFM (50 Hz) and 130 CFM (60 Hz) internally, and 86 CFM (50 Hz) and 95 CFM (60 Hz) externally. Power consumption is 552W at 460V 1PH, with a maximum current draw of 1.4A (50 Hz) and 1.3A (60 Hz).
  • Easy maintenance: hinged front cover allows quick access to all components; condenser coil can be cleaned while unit is still mounted to the cabinet
  • Smooth surface with minimal use of visible fasteners
  • Cleanable reusable aluminum mesh filter protects coils for maximum cooling performance
  • Operating temperature range from -40 F/-40 C to 131 F/55 C (with optional low-ambient package)
  • Reliable mechanical thermostat located behind the filter of the unit
  • Robust reciprocating compressor
  • Low-carbon mild-steel sheet-metal cover for rugged factory and outdoor environments
  • High-performance fans and blowers designed for densely packed enclosures
  • Easy-mount flanges for simple installation
  • Every unit functionally tested before shipping

Specifications

Amperage Rating
1.3 A
Application
Controls and Drives;Corrosive Environments;Power Distribution
Application
Corrosive Environments; Power Distribution; Controls and Drives
Btu Rating
1,600
Color
Light Gray
Color
Gray
Color Code
RAL 7035
Current Rating
1600 BTU
Depth
8.75 in
Depth
222 mm
Finish
Powder Coated
Frequency
1PH
Height
584 mm
Height
23 IN
Housing Material
Mild Steel
Material
Steel
Material
Mild Steel
Max Current
0.9 A
Mechanical Advantage
Stainless steel optional
Model
Surface Mounted
Mounting Type
Enclosure Mounted
NEMA Rating
12 Indoor, dust-resistant
Nominal Capacity Btu/h
1,733 Btu/h
Nominal Capacity Watts
508 W
Nominal Voltage
460 V
Number Of Phases
1
Operating Temperature
-40-55 °C
Operating Temperature
-40-55
Operating Temperature
-40-131 °F
Operating Temperature
131 deg F
Outdoor Installation
No
Power
469 W
Product Family
ProAir
Protection Rating
NEMA Type 12
Refrigerant
R513A
Remote Access Control
No
Series
ProAir Harsh Environment
Series
nVent ProAir CR23
Thickness
1.21 mm
Thickness
18 ga
Thickness
51.40mm (2.024")
Type
Air Conditioners
Voltage AC
400-460 V
Voltage Rating
460 VAC
Voltage Rating
460 V
Weight
30 kg
Weight
60 lb
Width
254 mm
Width
10 IN
Package Dimensions (L x W x H)
14.5 IN x 12 IN x 26.5 IN
Package Dimensions (L x W x H)
36.83 cm x 30.48 cm x 67.31 cm
Package Weight (Imperial)
60.000 L
Package Weight (Metric)
27.216 kg
SpectraCool Compact Indoor N17, 1000BTU 460V, Lt Gray, Steel

N170146G010

SpectraCool Compact Indoor N17, 1000BTU 460V, Lt Gray, Steel
DTT 6201 230V SC 7035

13256241055

DTT 6201 230V SC 7035
AIR CONDIT 3500BTU 460V LG

DTT6201B460LG

AIR CONDIT 3500BTU 460V LG
InRow RC 300mm Chilled Water

ACRC301S

InRow RC 300mm Chilled Water
Co-dev MCL Air conditioner, Bulletin MCL (Air Conditioners - CR43-0816)

CR430816G041

Co-dev MCL Air conditioner, Bulletin MCL (Air Conditioners - CR43-0816)
Filter Fan Package, 13 in, Bulletin MCLF (Type 12 Filter Fans - McLean Midwest ProAir Filter Fan Package), Size/Dims: 230v 50/60Hz, Material: ABS, Finish: Lt Gray

FF1016003

Filter Fan Package, 13 in, Bulletin MCLF (Type 12 Filter Fans - McLean Midwest ProAir Filter Fan Package), Size/Dims: 230v 50/60Hz, Material: ABS, Finish: Lt Gray
4000BTU 115V Cntrl Comm w/Heat, Bulletin MCLG (SPECTRACOOL® Air Conditioner - G28-0416), Size/Dims: 28.55x16.97x10.10, Material: Steel, Finish: Lt Gray

G280416G160

4000BTU 115V Cntrl Comm w/Heat, Bulletin MCLG (SPECTRACOOL® Air Conditioner - G28-0416), Size/Dims: 28.55x16.97x10.10, Material: Steel, Finish: Lt Gray
SpectraCool Compact Indoor with RAC N17, 1000BTU 115V, Lt Gray, Steel

N170116G020

SpectraCool Compact Indoor with RAC N17, 1000BTU 115V, Lt Gray, Steel

Frequently Asked Questions

What is the cooling capacity of the ProAir CR23?

The ProAir CR23 has a cooling capacity of 1400 to 1600 BTU per hour, depending on ambient conditions.

What voltage does the ProAir CR23 require?

The unit operates on 460V single-phase power at 50/60 Hz.

What is the operating temperature range?

The ProAir CR23 operates reliably from -40°F to 131°F (-40°C to 55°C).

What is the weight of the ProAir CR23?

The unit weighs 67 pounds (30 kg).

Is the ProAir CR23 suitable for outdoor use?

The ProAir CR23 is an indoor model with NEMA Type 12 and Type 3R ratings; outdoor use requires additional protection.

How is the ProAir CR23 installed?

The unit includes easy-mount flanges and mounting hardware for direct attachment to enclosures or panels.

How to Install the CR230246G400 Air Conditioner

Installation guide for mounting and wiring the CR230246G400 air conditioner.

Estimated time: 45m

Tools needed:

Screwdriver, Wrench, Ratchet driver

Supplies needed:

Mounting gasket kit, Mounting bolts, Washers

  1. Inspect and Test Functionality

    Inspect the air conditioner for any shipping damage. Verify its functionality by operating it for 5-10 minutes. Ensure no excessive noise or vibration is present, and that the condenser blower, evaporator blower, and compressor are running. Condenser air temperatures should become warmer than room temperature within minutes. If the unit was in a horizontal position, ensure it has been upright for at least 5 minutes before testing. Do not operate the unit while horizontal, as this can damage the compressor and void the warranty.

  2. Prepare Enclosure Openings

    Using the cutout dimensions provided in this manual, prepare the enclosure for the air 'IN' and air 'OUT' openings, as well as the mounting bolt hole pattern.

  3. Install Gaskets

    Apply the provided mounting gasket kit to the rear of the air conditioner according to the instructions on page 6.

  4. Mount the Air Conditioner

    Mount the air conditioner onto the enclosure using the provided mounting bolts and washers. Start bolts by hand to avoid cross-threading, then tighten with a wrench or ratchet driver. Ensure the unit remains upright during operation.

  5. Connect Power Supply

    Refer to the top of the nameplate for electrical requirements. Connect the power cord to a properly grounded power supply. Use of an extension cord is not recommended. The electrical circuit should be fused with a slow blow or HACR circuit breaker. Check the nameplate or datasheet for specific electrical current requirements, as minimum circuit ampacity should be at least 125% of the amperage shown.

  6. Adjust Temperature Controller (if applicable)

    If the unit is equipped with an automatic temperature controller, it is preset at the factory. For Level I controllers, disconnect power, open the front panel, and adjust the controller screw clockwise to decrease or counter-clockwise to increase the temperature set point. For Level II and III controllers, refer to the separate programming manual. After adjustment, close the front panel and restore power.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.