WEG Strategic Partner Distributor
WEG GPH2150PC4001 - STANDARD PANEL GPH2150PC4001 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 150 HP; Main voltage 460 V; Bypass type AC3; Control options Start Pushbutton, Stop Pushbutton, Run Light, Fault Light and Keypad; Enclosure rating Type 4

WEG GPH2150PC4001 STANDARD PANEL GPH2150PC4001 WEG specifications: Panel type SOFT-STARTER; Horsepower…

Alternate Item Number: 14405095

UPC: 7900208347118

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The WEG GPH2150PC4001 is a standard soft starter panel engineered for the controlled acceleration and deceleration of three-phase induction motors. This unit is capable of managing motors up to 150 HP, with a rated starter current of 200A. The GPH2150PC4001 is built with a compact Frame 3 design, contributing to its overall dimensions and weight of approximately 280 lbs. Its primary function is to mitigate mechanical stress and reduce electrical inrush current during motor startup sequences. This reduction in stress and current surge leads to an extended lifespan for connected equipment and helps to minimize disturbances on the power grid. The soft starter panel is well-suited for a variety of industrial applications, including but not limited to pumps, fans, and conveyors. Manufactured by WEG in Brazil, the GPH2150PC4001 is a component of the broader GPH2 series of soft starters. It offers smooth, programmable ramp-up and ramp-down times, allowing users to precisely match the acceleration and deceleration profiles to the specific requirements of the driven load. The Frame 3 size is optimized for installations where space is a critical consideration, without compromising on robust performance. The GPH2150PC4001 starter panel is designed for compatibility with standard three-phase induction motors that operate within its specified rated current and power parameters.
  • Rated for 150 HP three-phase induction motors
  • 200A starter current with Frame 3 design
  • Approx. weight: 280 lbs
  • Reduces mechanical stress and electrical inrush current
  • Suitable for pumps, fans, and conveyors

Specifications

Bypass type
AC3
Control options
Start Pushbutton, Stop Pushbutton, Run Light, Fault Light and Keypad
Enclosure rating
Type 4
Horsepower (HP)
150 HP
Main voltage
460 V
Panel type
SOFT-STARTER
Package Weight (Imperial)
282 LB
STANDARD PANEL GPH2150QC4000 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 150 HP; Main voltage 460 V; Bypass type None; Control options Start Pushbutton, Stop Pushbutton, Run Light and Fault Light; Enclosure rating Type 4

GPH2150QC4000

STANDARD PANEL GPH2150QC4000 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 150 HP; Main voltage 460 V; Bypass type None; Control options Start Pushbutton, Stop Pushbutton, Run Light and Fault Light; Enclosure rating Type 4
VLT® Soft Starter (MCD series), 150 HP, frame SE

132H2257

VLT® Soft Starter (MCD series), 150 HP, frame SE
PSTX normal duty enclosed softstarters are the ultimate softstarting solution. Includes all features of the PSTX normal duty, sized for normal duty applications. Both the PSTX softstarter and TMAX XT breakers are utilized. Door mounted pilot devices include PSTX keypad, hand-off-auto selector switch, start and stop pushbuttons, power on pilot light, run pilot light and fault pilot light. Good for Normal Duty class 10 starts for 150HP/192A, heavy duty class 30 starts for 125HP/169A, SSCR rating of 65kA, 480V and type 4 enclosure.

X125-B4-48-ND

PSTX normal duty enclosed softstarters are the ultimate softstarting solution. Includes all features of the PSTX normal duty, sized for normal duty applications. Both the PSTX softstarter and TMAX XT breakers are utilized. Door mounted pilot devices include PSTX keypad, hand-off-auto selector switch, start and stop pushbuttons, power on pilot light, run pilot light and fault pilot light. Good for Normal Duty class 10 starts for 150HP/192A, heavy duty class 30 starts for 125HP/169A, SSCR rating of 65kA, 480V and type 4 enclosure.
MTR DIN MT SOFT START 480V 12A

RSE4812-B

MTR DIN MT SOFT START 480V 12A
STANDARD PANEL GPH2200QC4001 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 200 HP; Main voltage 460 V; Bypass type None; Control options Start Pushbutton, Stop Pushbutton, Run Light, Fault Light and Keypad; Enclosure rating Type 4

GPH2200QC4001

STANDARD PANEL GPH2200QC4001 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 200 HP; Main voltage 460 V; Bypass type None; Control options Start Pushbutton, Stop Pushbutton, Run Light, Fault Light and Keypad; Enclosure rating Type 4
STANDARD PANEL GPH2200PC4001 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 200 HP; Main voltage 460 V; Bypass type AC3; Control options Start Pushbutton, Stop Pushbutton, Run Light, Fault Light and Keypad; Enclosure rating Type 4

GPH2200PC4001

STANDARD PANEL GPH2200PC4001 WEG specifications: Panel type SOFT-STARTER; Horsepower (HP) 200 HP; Main voltage 460 V; Bypass type AC3; Control options Start Pushbutton, Stop Pushbutton, Run Light, Fault Light and Keypad; Enclosure rating Type 4
The softstarter PSTX170-690-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

PSTX170-690-70

The softstarter PSTX170-690-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.
The softstarter PSE45-600-70 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

PSE45-600-70

The softstarter PSE45-600-70 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Frequently Asked Questions

What is the rated motor power for this soft starter?

The WEG GPH2150PC4001 is rated for 150 HP motors.

What is the starter current rating?

The starter current rating is 200A.

What frame size does this panel use?

This panel uses Frame 3.

What is the approximate weight of the panel?

The panel weighs approximately 280 lbs.

What type of motors is this soft starter compatible with?

It is designed for three-phase induction motors.

What applications is this soft starter suitable for?

It is suitable for pumps, fans, and conveyors.

Frequently Asked Questions about WEG

What certifications and standards do WEG products comply with?

WEG products meet extensive international standards across multiple critical categories, including safety, electromagnetic compatibility (EMC), functional safety, and regulatory compliance. Key certifications include UL, cUL, CE, TÜV Rheinland, and compliance with international standards such as EN 61800 series, IEC 61508, ISO 13849-1, and directives like Low Voltage (2014/35/EU), EMC (2014/30/EU), and RoHS. Their products are certified for safe operation in various industrial environments, with specific standards covering electrical safety, thermal performance, electromagnetic immunity, and environmental protection.

What is WEG's warranty policy?

WEG offers an 18-month standard warranty for automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Repairs must be performed by authorized WEG service, and the warranty is limited to the replacement or repair of the product itself, excluding consequential damages. Extended warranty options are available, including purchasing additional coverage at 2.5% of the product's selling price per year, up to 4 additional years.

What industries and applications are WEG products used for?

WEG products are extensively used across multiple industrial sectors, including packaging equipment, material handling, food processing, pumps, medical/lab equipment, door/gate openers, office machinery, and lawn/garden applications. Their versatile DC motors and variable frequency drives (VFDs) are designed for general industrial use, with solutions ranging from off-the-shelf products to custom OEM designs that meet UL/CSA standards for diverse manufacturing and processing environments.

What technical support does WEG offer?

WEG offers comprehensive technical support through multiple channels, including a dedicated Automation Service Department accessible via toll-free phone (1-877-934-3748) and email ([email protected]). They maintain a global network of accredited service centers worldwide, which customers can locate on their website. Additionally, WEG provides warranty support and technical assistance for their industrial automation products, with pre-approval required for warranty repairs.

What are the key features of WEG products?

WEG products feature advanced industrial automation technologies with key characteristics including high performance, flexibility, and connectivity. Their flagship CFW900 Variable Speed Drive demonstrates core product strengths: intelligent thermal management, built-in safety functions, IoT readiness, advanced energy saving capabilities, and comprehensive communication protocols. WEG drives offer robust performance with features like 150% overload capacity, modern graphic HMI, plug-and-play expansion modules, and compatibility across multiple industrial segments including food and beverage, pulp and paper, and manufacturing.

What communication protocols do WEG products support?

WEG products support multiple industrial communication protocols across their product lines, including EtherNet/IP, Modbus-TCP, Modbus-RTU, CANopen, and optional protocols like Profibus-DP and DeviceNet. Specifically, the PLC500 offers 2x Gigabit Ethernet Ports, 1x CAN Port, and 1x RS485 port, enabling seamless integration with major industrial communication networks.

What environmental ratings do WEG products have?

WEG products feature multiple environmental ratings and protection classes. They offer Protection Class 3C2 as a standard coating and Protection Class 3C3 as an optional extra coating, both compliant with IEC 60721-3-3. Environmental specifications include air relative humidity from 5% to 95% non-condensing, altitude ratings up to 1,000m standard (with current derating above that), and Pollution Degree 2 classification with non-conductive pollution requirements.

What accessories are available for WEG products?

WEG offers a comprehensive range of accessories across multiple product lines. For variable frequency drives like the CFW900, accessories include I/O expansion modules, communication modules, encoder modules, temperature transducer modules, relay output modules, and HMI accessories. These accessories expand communication capabilities, input/output functions, and application flexibility. Most accessories are interchangeable between drive frames and can be installed in backplane slots, with communication network accessories limited to one per variable speed drive.

What are the main product lines offered by WEG?

WEG offers a comprehensive range of industrial automation products, including variable frequency drives (CFW series like CFW100, CFW300, CFW500), soft starters (SSW series including SSW05, SSW07, SSW900), and the innovative Motion Fleet Management (MFM) system for predictive maintenance and asset monitoring. Their product lines are designed to support industrial automation needs across various sectors, providing solutions for motor control, fleet management, and operational efficiency.

How are WEG products typically installed?

WEG products are typically installed with careful attention to mounting specifications, protection ratings, and airflow requirements. For variable speed drives like the CFW900, installation methods include surface mounting, flange mounting, and side-by-side configurations with specific clearance guidelines. Installers must follow precise dimensional requirements for each product frame size, ensuring proper ventilation and electrical connections.