Authorized TE Connectivity Distributor
TE Connectivity T2020082201-000 - Socket, Insert for Contacts, 8+PE Pole Configuration, 26 – 14 AWG, 10 A, Crimp, Power & Signal, HDC HD

TE Connectivity T2020082201-000 Socket, Insert for Contacts, 8+PE Pole Configuration, 26 – 14 AWG, 10 A, Crimp, Power &…


Documents & Media
BrochureFull Engineering DrawingSpecification Sheet

Contact for Pricing

Minimum Qty: 80

Multiplier: 80

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

This TE Connectivity HDC HD socket insert, SKU T2020082201-000, is engineered for demanding power and signal applications within industrial environments. It offers a versatile 8+PE (8 contacts plus protective earth) pole configuration, designed to accept a broad range of wire gauges from 26 AWG to 14 AWG. Each individual contact within this insert is rated for a substantial 10 A current carrying capacity. Furthermore, it boasts a remarkably low contact resistance of ≤1mΩ, a critical factor in ensuring both the integrity of signal transmission and the efficient delivery of power, minimizing signal loss and heat generation. The terminal type employed by this socket insert is a crimp connection. It is important to note that the crimp contacts themselves are not included with the insert and must be ordered separately. TE Connectivity offers a comprehensive selection of compatible crimp contacts. For male connections, the CEM series is available, while the CEF series is designed for female connections. These crimp contacts come with a choice of plating options, including silver-plated and gold-plated finishes, allowing for customization based on specific application requirements and environmental considerations. For proper termination, the wire preparation for these crimp contacts requires a specific stripping length of 7.5 mm. This socket insert is designed for seamless integration with TE Connectivity's H16B hoods and housings, forming a complete and robust connector solution. Additionally, it is suitable for direct panel mounting and cut-out applications when used without the accompanying hoods or housings, offering flexibility in installation. The primary material used in the construction of this socket insert is a durable copper alloy, chosen for its inherent strength and resilience, making it well-suited for the rigors of industrial settings. This component serves as a fundamental building block for constructing reliable industrial connectors where the simultaneous and dependable transmission of both power and signal is paramount.
  • 8+PE pole configuration for combined power and signal transmission
  • Accommodates wire gauges from 26 to 14 AWG
  • 10 A current rating per contact
  • Low contact resistance of ≤1mΩ for reliable performance
  • Crimp terminal connection type, requiring separate crimp contacts

Specifications

Application
Power & Signal
Length
33.5 mm
Material
Polybutylene Terephthalate
Standard
UL94V-0
Type
Rectangular Contact Inserts
Insert for Contacts, Pin, 3 Pole Configuration, Crimp Terminal, 1.2 A, Power & Signal, HDC HMN

T2115032101-000

Insert for Contacts, Pin, 3 Pole Configuration, Crimp Terminal, 1.2 A, Power & Signal, HDC HMN
Concrete Insert, insert channel 12 guage steel, 13/16 inch depth. 10 foot.

B302 10

Concrete Insert, insert channel 12 guage steel, 13/16 inch depth. 10 foot.
Die Insert for CA9 Applicator

CD9-1B

Die Insert for CA9 Applicator
Pin, Insert for Contacts, 7 Pole Configuration, 26 – 14 AWG, Crimp, Power & Signal, HDC HD

T2020072101-000

Pin, Insert for Contacts, 7 Pole Configuration, 26 – 14 AWG, Crimp, Power & Signal, HDC HD
Pin, Insert for Contacts, 16 Pole Configuration, 26 – 12 AWG, .14 – 4 mm² Wire, Crimp, Power & Signal, HDC HA

T2010324101-000

Pin, Insert for Contacts, 16 Pole Configuration, 26 – 12 AWG, .14 – 4 mm² Wire, Crimp, Power & Signal, HDC HA
Pin, Insert for Contacts, 16 Pole Configuration, 26 – 12 AWG, .14 – 4 mm² Wire, Crimp, Power & Signal, HDC HA

T2010164101-000

Pin, Insert for Contacts, 16 Pole Configuration, 26 – 12 AWG, .14 – 4 mm² Wire, Crimp, Power & Signal, HDC HA
Socket, Insert for Contacts, 7 Pole Configuration, 26 – 14 AWG, Crimp, Power & Signal, HDC HD

T2020072201-000

Socket, Insert for Contacts, 7 Pole Configuration, 26 – 14 AWG, Crimp, Power & Signal, HDC HD
Socket, Contact Insert, 16+PE Pole Configuration, 14 – 20 AWG, .5 – 2.5 mm² Wire, 16 A, Screw Terminal, Power & Signal, HDC HA

T2010162201-000

Socket, Contact Insert, 16+PE Pole Configuration, 14 – 20 AWG, .5 – 2.5 mm² Wire, 16 A, Screw Terminal, Power & Signal, HDC HA

Frequently Asked Questions

What is the IP rating for HA/HB series shells?

The HA/HB series shells have an IP65 and IP68 rating for protection against dust and water ingress.

What are the available terminal types for these heavy duty connectors?

Available terminal types include screw terminals, spring terminals, and crimp terminations.

What does the IP69K rating signify for enclosures?

The IP69K rating means the enclosure is protected against water during high-pressure, jet-stream cleaning from any direction.

What is the corrosion resistance of these heavy duty connectors?

These connectors have a tested salt spray and corrosion resistance of over 1000 hours.

What are the available contact plating options?

Contacts are available with either silver or gold plating.

What is the maximum wire gauge for spring terminals?

Spring terminals can accommodate solid and stranded wires with cross sections ranging from 0.14 mm2 to 2.5 mm2 (AWG 26-14).

What is the maximum wire gauge for HD, HDD, HMN, HQ, and HK inserts?

For HD, HDD, HMN(10A), HQ(10A), and HK(10A) inserts, the maximum wire gauge is 2.5 mm2 (AWG 14).

What is the stripping length for HA-003 and HA-004 inserts?

The stripping length for HA-003 and HA-004 inserts is 4.5 mm.

What are the standard specifications for clearance and creepage distances?

Unless otherwise noted, clearance and creepage distances are based on DIN VDE 0110 for surge category III and pollution degree 3.

What is the recommended tightening torque for an M3 screw terminal on HA-010 and HA-016?

The recommended tightening torque for an M3 screw terminal on HA-010 and HA-016 is 0.50 Nm.

Frequently Asked Questions about TE Connectivity

What technical support does TE Connectivity offer?

TE Connectivity offers comprehensive technical support through multiple channels, including a dedicated technical hotline at 1-800-777-3300. The company provides advanced technical support with 3 dedicated support centers, a global technical hotline network, and delivers over 8,000 hours of technical training annually to ensure certified expertise across 25+ languages.

What environmental ratings do TE Connectivity products have?

TE Connectivity products feature robust environmental ratings across multiple standards, including NEMA Type 1, 2, 3, 3R, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. Our enclosures are designed to withstand challenging industrial environments, with operating temperatures ranging from -40°C to 130°C, and include enhanced UV inhibitors for outdoor applications.

What certifications and standards do TE Connectivity products comply with?

TE Connectivity products meet rigorous international certifications and standards across industrial automation applications, including UL (United States), CSA (Canada), CE (European Community), and international safety standards. Our product lines are designed to comply with critical industrial certifications such as NEMA (Types 4, 4X, 6, 6P), IP ratings (IP65, IP66, IP67, IP69K), and industrial communication protocols including PROFINET, EtherNet/IP, and DeviceNet. We ensure comprehensive compliance through active participation in key industrial standards committees and maintaining ISO 9001 quality system certification.

What industries and applications are TE Connectivity products used for?

TE Connectivity products are engineered for critical industrial applications across multiple sectors, including industrial device manufacturing, automotive, robotics, food and beverage, material handling, alternative energy, and commercial vehicle industries. Their solutions span connectivity, power distribution, network communications, and sensor technologies that support complex industrial automation requirements, with a focus on robust connectivity solutions for challenging manufacturing environments.

What are the main product lines offered by TE Connectivity?

TE Connectivity offers a comprehensive range of industrial connectivity solutions including Cable Ties, Cable Cleats, Power Connectors, Grounding Connectors, Terminals, Safety Solutions, Identification Products, and Wiring Duct. Their product lines are designed for robust industrial applications, featuring various connection technologies like wave soldering, spring-cage connections, and mis-insertion protection across multiple electrical and connectivity categories.

What accessories are available for TE Connectivity products?

TE Connectivity offers a comprehensive range of communication and bus accessories for industrial automation systems, including communication terminal boards (CTB810, CTB811), bus extenders (horizontal and vertical models like cHBX01L/R, HBX01L/R, VBX01T/B), and bus terminators (TER800, TER810). These accessories are designed to enhance connectivity, power distribution, and communication capabilities for HN800 and CW800 controller systems, with options for left/right side mounting, power connections, and network termination.

How are TE Connectivity products typically installed?

TE Connectivity products are typically installed through professional commissioning services that include site audits, precise wiring verification, and both remote and on-site installation support. Our expert service engineers conduct comprehensive installation processes involving system verification, programming, communication testing, and personnel training to ensure optimal performance and reliability of the equipment.