TE Connectivity 6-1393211-0 General Purpose Power Relay, AC, Monostable, 2 Form A DPST-NO, 30 A Contact Rating, 24…

A bistable or latching relay's contacts remain in their last switching position even after the coil input voltage is disconnected.

For low power automotive applications (0.5 A < I < 10 A at 12 V), AgNi0.15 or AgSnO2 are recommended contact materials.

Yes, TE Connectivity reserves the right to change technical parameters and product specifications without prior notice to improve performance and quality.

Bounce is an unintentional phenomenon where contact elements touch and separate again before reaching their final position during making or breaking of a contact circuit.

An 'AC-coil' indicates that the relay is designed for direct energization with an AC supply, with data typically given in Vrms for 50 Hz.

A flux proof relay is capable of being automatically soldered without allowing solder fluxes to migrate beyond intended areas.

Form A signifies a make contact, also known as normally open (NO) or SPST-NO.

The 'Definitions' section provides general definitions and is intended to be used alongside datasheets and product specifications for a comprehensive understanding of the components.

Breaking capacity max. is the product of the switching current and switching voltage, measured in W for DC or VA for AC.

Coil suppression circuits reduce the inductive switch-off voltage peak of the relay coil, offering EMC protection.

TE Connectivity offers comprehensive technical support through multiple channels, including a dedicated technical hotline at 1-800-777-3300. The company provides advanced technical support with 3 dedicated support centers, a global technical hotline network, and delivers over 8,000 hours of technical training annually to ensure certified expertise across 25+ languages.

TE Connectivity products feature robust environmental ratings across multiple standards, including NEMA Type 1, 2, 3, 3R, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. Our enclosures are designed to withstand challenging industrial environments, with operating temperatures ranging from -40°C to 130°C, and include enhanced UV inhibitors for outdoor applications.

TE Connectivity products meet rigorous international certifications and standards across industrial automation applications, including UL (United States), CSA (Canada), CE (European Community), and international safety standards. Our product lines are designed to comply with critical industrial certifications such as NEMA (Types 4, 4X, 6, 6P), IP ratings (IP65, IP66, IP67, IP69K), and industrial communication protocols including PROFINET, EtherNet/IP, and DeviceNet. We ensure comprehensive compliance through active participation in key industrial standards committees and maintaining ISO 9001 quality system certification.

TE Connectivity products are engineered for critical industrial applications across multiple sectors, including industrial device manufacturing, automotive, robotics, food and beverage, material handling, alternative energy, and commercial vehicle industries. Their solutions span connectivity, power distribution, network communications, and sensor technologies that support complex industrial automation requirements, with a focus on robust connectivity solutions for challenging manufacturing environments.

TE Connectivity offers a comprehensive range of industrial connectivity solutions including Cable Ties, Cable Cleats, Power Connectors, Grounding Connectors, Terminals, Safety Solutions, Identification Products, and Wiring Duct. Their product lines are designed for robust industrial applications, featuring various connection technologies like wave soldering, spring-cage connections, and mis-insertion protection across multiple electrical and connectivity categories.

TE Connectivity offers a comprehensive range of communication and bus accessories for industrial automation systems, including communication terminal boards (CTB810, CTB811), bus extenders (horizontal and vertical models like cHBX01L/R, HBX01L/R, VBX01T/B), and bus terminators (TER800, TER810). These accessories are designed to enhance connectivity, power distribution, and communication capabilities for HN800 and CW800 controller systems, with options for left/right side mounting, power connections, and network termination.

TE Connectivity products are typically installed through professional commissioning services that include site audits, precise wiring verification, and both remote and on-site installation support. Our expert service engineers conduct comprehensive installation processes involving system verification, programming, communication testing, and personnel training to ensure optimal performance and reliability of the equipment.