Patton Electronics TD-5601-L5B Isolator for ISDN BRI S/T 4-wire Interface, 1310nm Singlemode LC optics, TD Package…

The TTM enclosure has dimensions of 14.3 inches (length) by 11.4 inches (width) by 4.5 inches (height).

The unloaded TTM enclosure weighs 6.5 lb (2.9 kg).

The TTM operates with a voltage range of 100 to 240 VAC.

The maximum power consumption for the TTM is 40 W.

The TTM uses a PowerCON TRUE1 connector on the rear for AC power input.

The TTM can accommodate up to 6 single-wide TD Series modules, or a combination like two double-wide and two single-wide modules.

Yes, the TTM can be mounted to any standard truss section using two truss clamps with M10 mounting bolts.

TD modules are secured by lowering them onto studs, sliding them forward, and then using a retention bar and screws.

The TTM should be installed in an environment where an ambient temperature between 0° and 50° C can be maintained.

The unit is equipped with a 50 mm fan to remove excess heated air inside the enclosure.

Patton Electronics offers a comprehensive 30-day money-back guarantee on all standard products. This allows customers to purchase with complete confidence, and if unsatisfied, return the product within 30 days. Additionally, Patton provides free top-notch technical support and offers extended warranty options for customers seeking additional protection.

Patton Electronics products serve multiple critical industries including telecommunications, enterprise networking, industrial automation, banking, point-of-sale, and machine-to-machine communications. Their product lines like SmartNode VoIP, IPLink Routers, and Remote Access Servers enable connectivity solutions for ISP internet access, corporate VPN networks, remote industrial communications, secure banking transactions, and diverse network environments.

Patton Electronics offers comprehensive technical support through multiple channels, including free top-notch phone and online support directly from factory personnel. Customers receive immediate assistance via phone (+1.301.975.1007 in USA, +41.31.985.25.55 in Switzerland) or email ([email protected]). Their technical support includes free technical advice, installation assistance, advanced service level agreements (SLAs), extended warranty options, advance replacements, and on-site training services.

Patton Electronics offers a comprehensive range of networking and communication products across multiple product lines, including VoIP Telephony, IP WAN Routers, DSL Products, Remote Access Servers, Serial Device Servers, Industrial Computers, Interface Converters, and Network Connectivity Solutions. Their key product categories span telecommunications infrastructure, network access technologies, and industrial communication equipment, with a strong focus on integrated voice/data routers, broadband connectivity, and network access solutions.

Patton Electronics offers a comprehensive range of industrial networking and communication products with key features including VoIP telephony, network access solutions, device servers, and Ethernet extension technologies. Their product lines feature robust software, industry-standard protocols (H.323, SIP, MGCP), and versatile interface options for voice and data networks. Standout capabilities include low-cost broadband routers, remote access servers with legacy modem compatibility, and Ethernet extenders that can operate over standard twisted pair cables with ranges up to 5 miles.

Patton Electronics products support multiple communication protocols across serial and Ethernet networks, including RS-232, RS-422, RS-485, Ethernet 10/100BaseTX, 802.11b WiFi, Bluetooth, IPv4, TCP/UDP, Telnet, DHCP, and NAT. Their device servers and networking solutions enable seamless communication between serial devices and Ethernet networks, with support for various data formats, parity options, and transmission speeds.

Patton Electronics offers three primary environmental ratings through their EnviroNET product lines: EH Series (NEMA 4, 32-122°F), EC Series (32-185°F with environmental protection), and ET Series (Extended Temperature, -40 to 185°F with robust environmental resistance). These series protect against dust, rain, snow, moisture, and physical tampering, making them suitable for harsh industrial environments.

Patton Electronics offers a wide range of accessories including power supplies, interface converters, surge protectors, baluns, line drivers, fiber modems, serial device servers, Ethernet extenders, and rack mounting solutions. Key accessories include universal AC/DC power supplies, rack chassis, interface cards, and connectivity adapters for various network and communication applications.

Patton Electronics products are certified to ISO 9001 quality management standards and comply with key international certifications including UL (Underwriters Laboratories) for the USA and Canada. The company maintains a rigorous quality assurance system at their Gaithersburg, Maryland facility, ensuring their industrial networking, communications, and automation products meet high standards of performance and reliability.

Patton Electronics offers comprehensive installation support through their Global Solutions Group, which provides system engineering, installation, operations, and maintenance services for voice, data, and integrated networks. Their technical support team can assist with installation, and they offer extensive online resources including user manuals and technical notes at www.patton.com to facilitate product setup. For complex installations, Patton leverages a network of local personnel and integration contractors worldwide to ensure professional implementation.