Contact for Pricing
Overview
- UL 486B listed for 600V maximum applications
- Tin-plated stranded copper pin for corrosion resistance
- Connector bores pre-coated with oxide inhibitor
- Supplied with EPDM insulating cover for strain relief
- Compatible with NSI N1240 crimp tool
- Rated 90°C operating temperature (AL9)
- Tan color coding for 1/0 AWG wire range
- Dimensions: OD 0.900", ID 0.366", pin length 1.259"
Specifications
Application | Terminate, Splice, Tap Power Connectors |
Color | Tan |
Conductor Range | 1/0 AWG (STR) |
Connection | # 2 Pin |
Connection Type | Solderless (compression/bolt-on) |
Environmental Conditions | 90 C |
Finish | Aluminum |
Insulation | Plastisol Cover |
Material | Tin-plated copper (stranded) with aluminum connector body |
Material | Aluminum - Tin Plated Copper Pin |
Number of Conductors | 1 |
Number Of Poles | 1 |
Series | PT |
Size | L=3.40 - OD=.900 - ID=.366 - Pin Dia=.287 |
Size | 1/0 AWG |
Special Features | 1/0 AWG (STR) - # 2 CU Pin Size |
Standard | UL486 |
Temperature Rating | 90 C |
Type | Bi-Metallic Pin |
Voltage Rating | 600 V |
Warranty | 1 Year |
Package Dimensions (L x W x H) | 3.405 IN x 0.9 IN x 0.9 IN |
Package Dimensions (L x W x H) | 8.6487 cm x 22.86 mm x 22.86 mm |
Package Weight (Imperial) | 2.000 L |
Package Weight (Metric) | 0.907 kg |
ASC1/0T
Dual Rated Aluminum Splice 1/0 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
PTS1/0
Solid Pin Terminal for Copper and Aluminum Conductors 1/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
SC-1/0
StandardBarrel TinnedCopperSplice1/0 AWG Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.C-1/0
Long Barrel TinnedCopperSplice1/0 AWG Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
PTS6
Solid Pin Terminal for Copper and Aluminum Conductors 6 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
PT1
Stranded Bi-Metallic Pin Terminal 1 AWG Stranded Bi-Metallic Pin Terminals is designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.
PT4
Stranded Bi-Metallic Pin Terminal 4 AWG Stranded Bi-Metallic Pin Terminals is designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.
PTS4
Solid Pin Terminal for Copper and Aluminum Conductors 4 STR All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
PTS2
Solid Pin Terminal for Copper and Aluminum Conductors 2 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
PTS1
Solid Pin Terminal for Copper and Aluminum Conductors 1 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
AL1/0N
2HoleStandard BarrelAluminum Compression Lug1/0 AWG -1/2 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.AL1/0-38
1 HoleStandard BarrelAluminum Compression Lug1/0 AWG -3/8 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.How to Install and Crimp NSI PT/PTS/PTO Pin Terminals
Install NSI PT, PTS, or PTO pin terminals by selecting the correct connector, preparing the conductor, and crimping it with the specified die and number of crimps. Follow the strip-length and tooling requirements for the exact catalog number being used.
Estimated time: 15m
Tools needed:
Wire stripper, Wire brush, Crimping tool compatible with the specified NSI die or listed UL tool, Appropriate die set for the selected PT/PTS/PTO connector
Supplies needed:
NSI PT, PTS, or PTO pin terminal connector, Conductor/cable of the correct size, Electrical insulation as required by the installation
- Select the correct connector and tooling
Identify the exact PT, PTS, or PTO catalog number for the cable size you are installing, and verify the matching die number, strip length, and number of crimps from the chart. Use only the specified UL listed tool or approved crimping tool for that connector size.
- Strip and clean the conductor
Carefully strip the insulation to the specified length without nicking the strands. Wire brush the stripped conductor to remove oxide films, and make sure the conductor is clean before insertion.
- Insert the conductor fully into the barrel
Insert the stripped conductor completely into the connector barrel so it fills the barrel fully. Do not leave exposed strands outside the connector, and verify the conductor is seated all the way in before crimping.
- Crimp the connector with the specified die
Install the correct die in the crimping tool and crimp the connector the required number of times for the selected part number. Follow the table for the exact die index and crimp count, and ensure each crimp is made squarely and completely.
- Inspect the finished connection
Check that the connector is securely crimped, the conductor is fully retained, and no strands were damaged or left outside the barrel. If the installation will be energized, have a qualified electrician verify compliance with national and local electrical codes.
Frequently Asked Questions about NSI Industries
How are Tork products typically installed?
Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.
What environmental ratings do Tork products have?
Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.
What communication protocols do Tork products support?
Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.
What are the key features of Tork products?
Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.
What are the main product lines offered by Tork?
Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.
What technical support does Tork offer?
Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.
What industries and applications are Tork products used for?
Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.
What certifications and standards do Tork products comply with?
Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.
How are Remke products typically installed?
Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.
What accessories are available for Remke products?
Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.