Authorized Minerallac Company Distributor
Minerallac Company 79508 - Metal piercing stud screw with a sharp point for use in thin metal less than 0.050 in. thick. Made of steel with a zinc plated finish. It has a hex washer head, slotted drive, Type-A thread, and is sized 8 x 1/2 in.
Minerallac Company

79508

Alternate Item Number: 12116292

UPC: 085937795083

Documents & Media
Specification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Overview

The Minerallac Company 79508 is a zinc-plated steel screw measuring 8 x 1/2 inches. This fastener features a hex washer head with a slotted drive, designed for secure fastening in wood, particle board, and similar materials. The sharp point design minimizes the need for pre-drilling, streamlining installation. The hex washer head provides an increased bearing surface, enhancing grip and reducing the likelihood of pull-through, especially in softer materials. Manufactured in the US by Minerallac Company, this screw is suitable for construction, cabinetry, and general woodworking applications where a flush or slightly recessed head is desired. Its zinc plating offers corrosion resistance for general use. This specific model does not feature deep threads or a square drive, aligning with its intended applications for standard material fastening. The UNSPSC code for this product is 31161600.
  • 8 x 1/2 inch size
  • Zinc-plated steel construction
  • Hex washer head with slotted drive
  • Sharp point for reduced pre-drilling
  • Manufactured in the US by Minerallac Company
  • Color: Zinc
  • Manufacturer: Minerallac Company
  • Country of Origin: US

Specifications

Application
May be used in thin metal (less than 0.050" thick).
Drive Type
Slotted
Finish
Zinc Plated
Head Color
Silver
Head Height
0.103" IN
Head Type
Hex Washer Head
Head Width
0.247" IN
Length
0.500" IN
Material
Steel
Size
8 x 1/2" IN
Special Features
Sharp Point eliminates the need for pre-drilled holes or pre-punched holes.
Thread Size
15 TPI
Thread Type
Type-A
Type
Metal Piercing Stud Screws
Washer Outside Diameter
0.670" IN
Package Weight (Imperial)
0.34 lbs
Metal piercing stud screw with a sharp point for use in thin metal less than 0.050 in thick. It is made of steel with a zinc plated finish. The screw is size 8 x 3/4 in and has a hex washer head with a slotted drive.

79512

Metal piercing stud screw with a sharp point for use in thin metal less than 0.050 in thick. It is made of steel with a zinc plated finish. The screw is size 8 x 3/4 in and has a hex washer head with a slotted drive.
#12-11 x 3/4 Pan Hd Combo Tapping Screw Zinc

JTS33M

#12-11 x 3/4 Pan Hd Combo Tapping Screw Zinc
This is a metal piercing stud screw with a sharp point and hex washer head. It is made of steel with a zinc plated finish and slotted drive. The screw is size 8 x 1-1/2 in and is intended for use in thin metal less than 0.050 in thick.

79524-6

This is a metal piercing stud screw with a sharp point and hex washer head. It is made of steel with a zinc plated finish and slotted drive. The screw is size 8 x 1-1/2 in and is intended for use in thin metal less than 0.050 in thick.
This is a sheet metal screw for use with sheet metal. It is made of steel with a zinc plated finish. The screw is size #8 x 1-3/4 in, with a 1.750 in length, Type-A thread, and a slotted drive.

76828

This is a sheet metal screw for use with sheet metal. It is made of steel with a zinc plated finish. The screw is size #8 x 1-3/4 in, with a 1.750 in length, Type-A thread, and a slotted drive.
Metal piercing stud screws with a sharp point that eliminates the need for pre-drilled or pre-punched holes. Made of steel with a zinc plated finish and a slotted hex washer head. Size is 8 x 1-1/2 in, with 1.500 in length, Type-A thread, and 15 TPI.

79524

Metal piercing stud screws with a sharp point that eliminates the need for pre-drilled or pre-punched holes. Made of steel with a zinc plated finish and a slotted hex washer head. Size is 8 x 1-1/2 in, with 1.500 in length, Type-A thread, and 15 TPI.
Metal piercing stud screw with an extra sharp point and a second thread spaced 180 degrees apart. It is made of steel with a zinc plated finish and is intended for use in thin metal less than 0.050 inch thick. The screw is size 8 x 1 inch and has a hex washer head with a slotted drive.

79516

Metal piercing stud screw with an extra sharp point and a second thread spaced 180 degrees apart. It is made of steel with a zinc plated finish and is intended for use in thin metal less than 0.050 inch thick. The screw is size 8 x 1 inch and has a hex washer head with a slotted drive.
This is a steel metal piercing stud screw with a sharp point and hex washer head. It is zinc plated with a silver head color and is intended for use in thin metal less than 0.050 inch thick. The screw is size 8 x 1/2 inch and has a slotted drive.

79508-6

This is a steel metal piercing stud screw with a sharp point and hex washer head. It is zinc plated with a silver head color and is intended for use in thin metal less than 0.050 inch thick. The screw is size 8 x 1/2 inch and has a slotted drive.
This is a metal piercing stud screw with a sharp point and slotted drive. It is made of steel with a zinc plated finish and has a hex washer head. The screw size is 8 x 3/4 in and it may be used in thin metal less than 0.050 in thick.

79512-6

This is a metal piercing stud screw with a sharp point and slotted drive. It is made of steel with a zinc plated finish and has a hex washer head. The screw size is 8 x 3/4 in and it may be used in thin metal less than 0.050 in thick.

Frequently Asked Questions about Minerallac Company

What are the main product lines offered by Minerallac Company?

Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.

What is Minerallac Company's warranty policy?

Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.

What industries and applications are Minerallac Company products used for?

Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.

What technical support does Minerallac Company offer?

Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.

What are the key features of Minerallac Company products?

Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.

What environmental ratings do Minerallac Company products have?

Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.

What accessories are available for Minerallac Company products?

Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.

How are Minerallac Company products typically installed?

Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.

What communication protocols do Minerallac Company products support?

Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.