Authorized Minerallac Company Distributor
Minerallac Company 79008BFG - This is a self-drilling (TEK) sheet metal screw with a hex washer head and #2 drill point. It is made of steel with a zinc plated finish. The screw is size #10-16, 1/2 inch long, with Type-BSD thread, 16 threads per inch, a 0.309 inch head width, and a 0.113 inch head height.
Minerallac Company

79008BFG

Alternate Item Number: 12234884

UPC: 085937952226

Documents & Media
Specification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 5000

Multiplier: 5000

*Contact for lower quantities*

Overview

The Minerallac Company 79008BFG is a 10-16 x 1/2 inch Hex Washer Head Tek Screw with a Zinc plating. These self-drilling screws are designed for efficient fastening in various industrial applications. The hex washer head provides a large bearing surface, distributing load and preventing pull-through. The zinc plating offers moderate corrosion resistance for general use. This specific Tek screw (SKU 79008BFG) is categorized under UNSPSC code 31161500, indicating its use in fasteners and hardware. It is a straightforward, functional component for joining materials, particularly metal to metal or metal to other substrates where self-drilling capability is required. Manufactured in the US.
  • 10-16 x 1/2" size
  • Hex Washer Head design
  • Zinc (ZP) plating for moderate corrosion resistance
  • Self-drilling capability for efficient fastening
  • Manufactured in the US

Specifications

Finish
Zinc Plated
Head Color
Silver
Head Height
0.113" IN
Head Type
Hex Washer Head
Head Width
0.309" IN
Length
1/2" IN
Material
Steel
Size
#10-16
Thread Size
16 TPI
Thread Type
Type-BSD
Type
Tek Screws
Package Weight (Imperial)
40.8 lbs
This is a 10-16 x 1 inch self-drilling (TEK) sheet metal screw with a hex washer head and #2 drill point. It is made of steel with a zinc plated finish. The screw has a Type-BSD thread, size #10-16, and a silver head color.

79016P

This is a 10-16 x 1 inch self-drilling (TEK) sheet metal screw with a hex washer head and #2 drill point. It is made of steel with a zinc plated finish. The screw has a Type-BSD thread, size #10-16, and a silver head color.
Self-Drilling & Tapping Drywall Screw, Steel material, #6 Size, 1 in. length, Fine thread type, Bugle head, Zinc finish, Phillips drive, Self Drill Point, 100 per pack, #1 bit size. For use with 12 Gauge Steel Stud.

JSDS1C

Self-Drilling & Tapping Drywall Screw, Steel material, #6 Size, 1 in. length, Fine thread type, Bugle head, Zinc finish, Phillips drive, Self Drill Point, 100 per pack, #1 bit size. For use with 12 Gauge Steel Stud.
Screw, Self-Drilling, Size 8 x 3/4 Inch, Hex Head Size 1/4 Inch, Point Number 2

54-301

Screw, Self-Drilling, Size 8 x 3/4 Inch, Hex Head Size 1/4 Inch, Point Number 2
This is a sheet metal screw sized 8 x 9/16 inch. It is made of steel with a zinc plated finish and has a wafer head with Phillips drive. The screw has Type-A threads, thread size 15, a head width of 0.384 inch, and a head height of 0.102 inch.

14811BFG

This is a sheet metal screw sized 8 x 9/16 inch. It is made of steel with a zinc plated finish and has a wafer head with Phillips drive. The screw has Type-A threads, thread size 15, a head width of 0.384 inch, and a head height of 0.102 inch.
A #10 self-drilling (TEK) sheet metal screw with a pan head and square drive. It is made of steel with a zinc plated finish. The screw is 5/8 in long, has Type-BSD self-drilling threads with 16 thread size, and a #3 drill point.

27010J

A #10 self-drilling (TEK) sheet metal screw with a pan head and square drive. It is made of steel with a zinc plated finish. The screw is 5/8 in long, has Type-BSD self-drilling threads with 16 thread size, and a #3 drill point.
A 1/4-14 x 1 inch self-drilling (TEK) sheet metal screw. It has a hex washer head and a #3 drill point. The screw is made of 410 stainless steel and is supplied in a jar.

79416SSJ

A 1/4-14 x 1 inch self-drilling (TEK) sheet metal screw. It has a hex washer head and a #3 drill point. The screw is made of 410 stainless steel and is supplied in a jar.
These are 8 x 1/2 inch Lath Tek screws (K-Lath) with a wafer head and Phillips drive. They are made of steel with a zinc plated finish and a silver head color. The screws are size #8, have a 1/2 inch length, and use Type-BSD self-drilling threads with 18 thread size.

26809P

These are 8 x 1/2 inch Lath Tek screws (K-Lath) with a wafer head and Phillips drive. They are made of steel with a zinc plated finish and a silver head color. The screws are size #8, have a 1/2 inch length, and use Type-BSD self-drilling threads with 18 thread size.
A 10-16 x 3/4 in self-drilling (TEK) sheet metal screw. It has a hex washer head and #2 drill point. The screw is made of 410 stainless steel and is supplied in a jar.

79012SSJ

A 10-16 x 3/4 in self-drilling (TEK) sheet metal screw. It has a hex washer head and #2 drill point. The screw is made of 410 stainless steel and is supplied in a jar.

Frequently Asked Questions about Minerallac Company

What are the main product lines offered by Minerallac Company?

Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.

What is Minerallac Company's warranty policy?

Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.

What industries and applications are Minerallac Company products used for?

Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.

What technical support does Minerallac Company offer?

Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.

What are the key features of Minerallac Company products?

Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.

What environmental ratings do Minerallac Company products have?

Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.

What accessories are available for Minerallac Company products?

Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.

How are Minerallac Company products typically installed?

Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.

What communication protocols do Minerallac Company products support?

Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.