Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Overview
- 3/8" diameter x 5" length stud wedge anchor
- Four-piece mechanical expansion bolt with pre-assembled clip and nut
- Creates wedging effect for maximum holding power in concrete, block, or masonry
- High shear and tensile strength for structural applications
- No special tools required; standard hardware sufficient for installation
Specifications
Application | non-bottom bearing anchors of greater shear strength than other light and medium-duty expansion anchors for use in concrete and stone.;These are heavy-duy |
Diameter | 3/8 in |
Drill Size | 3/8" IN |
Embedment Depth, Minimum | 1-1/2 in |
Finish | Zinc Plated |
ICC EVALUATION SVC | ICC-ES FILE #ESR-2251 |
Length | 5 in |
Length | 127 mm |
Material | Steel |
Minimum Embedment Depth | 1-1/2" |
Mounting Type | Wedge Expansion |
Mounting Type | Wedge Anchor |
Size | 3/8 x 5 |
Special Features | Designed for full-contact expansion. |
Thread Length | 3 in |
Thread Length | 76.2 mm |
Thread Per Inch | 16 |
Thread Size | 3/8 IN |
Thread Type | Coarse |
Type | Wedge Anchor |
62236US
This is a wedge anchor designed for full-contact expansion. It is made of steel with a zinc plated finish. The anchor has a 3/8" diameter, 2-1/4" length, 1-1/2" minimum embedment depth, and is intended for use in concrete and stone.
76760US
A 3/8 inch by 3-3/4 inch wedge anchor made from Type 304 stainless steel with a stainless steel finish. It is a four-piece anchor assembly designed for full-contact expansion and use in concrete and stone. The anchor has coarse threads, a 3/8 inch drill size, and a minimum embedment depth of 1-1/2 inches.
62036US
A wedge anchor designed for full-contact expansion. It is a heavy-duty, non-bottom bearing anchor with greater shear strength than light and medium-duty expansion anchors. Made of steel with a zinc plated finish, it is intended for use in concrete and stone. Key dimensions include 1/4" diameter, 2-1/4" length, and 1-1/8" minimum embedment depth.
61640SSJ
A 3/8 x 4 inch sleeve anchor with hex nut. It is made of Type 304 stainless steel. The sheet lists a 3/8 inch drill bit diameter and a minimum embedment of 1-1/4 inch.
62656US
This is a wedge anchor for use in concrete and stone. It is made of steel with a zinc plated finish. The anchor has a 5/8" diameter, 3-1/2" length, and 2-3/4" minimum embedment depth.
60404SSJ
A 3/8"-16 steel drop-in anchor with internal threads and a 1/2" drill size. The sheet lists an anchor length of 1-5/8" and a minimum embedment depth of 1.625". It is shown with zinc plated finish in the attributes table, while the title line identifies Type 304 stainless steel.
62248US
This is a wedge anchor designed for full-contact expansion. It is made of steel with a zinc plated finish and is intended for use in concrete and stone. The anchor has a 3/8" diameter, 3" length, and 1-1/2" minimum embedment depth.Frequently Asked Questions about Minerallac Company
What are the main product lines offered by Minerallac Company?
Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.
What is Minerallac Company's warranty policy?
Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.
What industries and applications are Minerallac Company products used for?
Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.
What technical support does Minerallac Company offer?
Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.
What are the key features of Minerallac Company products?
Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.
What environmental ratings do Minerallac Company products have?
Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.
What accessories are available for Minerallac Company products?
Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.
How are Minerallac Company products typically installed?
Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.
What communication protocols do Minerallac Company products support?
Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.