Authorized Minerallac Company Distributor
Minerallac Company 62027 - A wedge anchor for use in concrete and stone. It is made of steel with a zinc finish. The anchor is 1/4 inch diameter by 1-3/4 inch length, with a 1/2 inch hex head and 1/4 inch drill size.
Minerallac Company

62027

Alternate Item Number: 12121601

UPC: 085937620279

Documents & Media
Specification SheetManufacturer Product Website

Contact for Pricing

Overview

The Minerallac 62027 is a 1/4" x 1-3/4" stud wedge anchor, a four-piece mechanical expansion bolt designed for secure and high-strength fastening in concrete and masonry. This anchor features a 1/4" diameter and a 1-3/4" length, providing reliable load-bearing capacity through expansion at its base for maximum grip. It is suitable for medium-duty applications such as framing, equipment mounting, and fixture installation. The anchor offers consistent holding power in solid base materials and is designed for both indoor and outdoor use, with vibration resistance. It comes pre-assembled and requires a 1/4" drilled hole for installation. Manufactured by Minerallac Company in the USA.
  • 1/4" diameter x 1-3/4" length stud wedge anchor
  • Four-piece steel mechanical expansion bolt
  • High-strength fastening in concrete and masonry
  • Reliable load-bearing with base expansion for maximum grip
  • Suitable for medium-duty applications: framing, equipment, fixtures

Specifications

Application
Concrete & Stone
Diameter
1/4" IN
Drill Size
1/4" IN
Finish
Zinc
Head Diameter
1/2" IN
Head Type
Hex
Included
Hex Nut & Washer
Length
1-3/4" IN
Material
Steel
Minimum Embedment Depth
1-1/8" IN
Size
1/4 x 1-3/4 IN
Special Features
1/4 X 1-3/4
Thread Length
3/4"
Thread Per Inch
20 TPI
Thread Size
1/4" IN
Thread Type
Course
Type
Wedge Anchor
A wedge anchor designed for full-contact expansion. It is a heavy-duty, non-bottom bearing anchor with greater shear strength than light and medium-duty expansion anchors. Made of steel with a zinc plated finish, it is intended for use in concrete and stone. Key dimensions include 1/4" diameter, 2-1/4" length, and 1-1/8" minimum embedment depth.

62036US

A wedge anchor designed for full-contact expansion. It is a heavy-duty, non-bottom bearing anchor with greater shear strength than light and medium-duty expansion anchors. Made of steel with a zinc plated finish, it is intended for use in concrete and stone. Key dimensions include 1/4" diameter, 2-1/4" length, and 1-1/8" minimum embedment depth.
3/8-16 x 7 J-Blt USA St-Zn

BTJ7

3/8-16 x 7 J-Blt USA St-Zn
This is a wedge anchor designed for full-contact expansion. It is a heavy-duty, non-bottom bearing anchor for use in concrete and stone. The anchor is made of Type 304 stainless steel with a stainless steel finish. Key dimensions include 3/8" diameter, 2-1/4" length, 1-1/2" minimum embedment depth, 3/8" drill size, and 3/8" coarse thread size.

76736US

This is a wedge anchor designed for full-contact expansion. It is a heavy-duty, non-bottom bearing anchor for use in concrete and stone. The anchor is made of Type 304 stainless steel with a stainless steel finish. Key dimensions include 3/8" diameter, 2-1/4" length, 1-1/2" minimum embedment depth, 3/8" drill size, and 3/8" coarse thread size.
This is a 1/4"-20 stainless steel drop-in anchor with a 3/8" drill bit diameter and 1" anchor length. It has internal threads, a 0.875" thread length, and a minimum embedment depth of 1.000". The anchor is made of stainless steel with a plain finish.

60402SS316J

This is a 1/4"-20 stainless steel drop-in anchor with a 3/8" drill bit diameter and 1" anchor length. It has internal threads, a 0.875" thread length, and a minimum embedment depth of 1.000". The anchor is made of stainless steel with a plain finish.
This is a wedge anchor, also known as an expansion bolt or expansion anchor, for use in concrete and stone. It is made of steel with a zinc plated finish. The anchor measures 1/2 inch in diameter and 4-1/4 inches in length, with a minimum embedment depth of 2-1/4 inches.

62468US

This is a wedge anchor, also known as an expansion bolt or expansion anchor, for use in concrete and stone. It is made of steel with a zinc plated finish. The anchor measures 1/2 inch in diameter and 4-1/4 inches in length, with a minimum embedment depth of 2-1/4 inches.
This is a wedge anchor designed for full-contact expansion in concrete and stone. It is made of steel with a zinc plated finish. The anchor has a 5/8 in. diameter, 6 in. length, 5/8 in. drill size, 2-3/4 in. minimum embedment depth, coarse threads, and 11 threads per inch.

62696US

This is a wedge anchor designed for full-contact expansion in concrete and stone. It is made of steel with a zinc plated finish. The anchor has a 5/8 in. diameter, 6 in. length, 5/8 in. drill size, 2-3/4 in. minimum embedment depth, coarse threads, and 11 threads per inch.
This is a drop-in anchor made from Type 316 stainless steel. It is sized 1/2-13. The sheet identifies it as an anchor bolt product.

60406SS316

This is a drop-in anchor made from Type 316 stainless steel. It is sized 1/2-13. The sheet identifies it as an anchor bolt product.
A wedge anchor for use in concrete and stone. It is made of steel with a zinc plated finish. Key dimensions listed are 5/8 in. diameter, 7 in. length, 2.125 in. thread length, and 0.625 in. drill size. The minimum embedment depth is 1.500 in.

62698

A wedge anchor for use in concrete and stone. It is made of steel with a zinc plated finish. Key dimensions listed are 5/8 in. diameter, 7 in. length, 2.125 in. thread length, and 0.625 in. drill size. The minimum embedment depth is 1.500 in.

Frequently Asked Questions about Minerallac Company

What are the main product lines offered by Minerallac Company?

Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.

What is Minerallac Company's warranty policy?

Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.

What industries and applications are Minerallac Company products used for?

Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.

What technical support does Minerallac Company offer?

Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.

What are the key features of Minerallac Company products?

Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.

What environmental ratings do Minerallac Company products have?

Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.

What accessories are available for Minerallac Company products?

Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.

How are Minerallac Company products typically installed?

Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.

What communication protocols do Minerallac Company products support?

Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.