Authorized Minerallac Company Distributor
Minerallac Company 61822J - This is a concrete sleeve anchor with a hex nut head, sized 1/2 x 2-1/4 in. It is made of steel with a zinc plated finish. The anchor is used in cinder block, brick, thin wall, and concrete, and is well-suited for permanently anchoring heavy equipment to concrete.
Minerallac Company

61822J

Alternate Item Number: 12112185

UPC: 085937043467

Documents & Media
Specification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Overview

The Minerallac Company SKU 61822J is a 1/2" x 2-1/4" zinc hex sleeve anchor designed for medium-duty fastening in masonry, brick, cinder block, and solid concrete. This anchor features a 7/16" hex shank for secure tool engagement and requires a 1-1/4" hole diameter for installation. The zinc construction provides corrosion resistance for indoor and protected outdoor applications. Each anchor includes a hex nut for straightforward tightening with standard tools. The 2-1/4" length ensures reliable embedment in base materials while maintaining structural integrity. This anchor is ideal for contractors and DIYers requiring a dependable, removable fastening solution for non-structural and light structural attachments. Packaged in a jar of 25 units for efficient inventory management and bulk application. Compatible with standard 1/2" drill bits and designed for applications where medium-duty load capacity is required.
  • 1/2" x 2-1/4" zinc hex sleeve anchor for medium-duty fastening
  • 7/16" hex shank for secure tool engagement
  • Requires 1-1/4" hole diameter for installation
  • Zinc construction provides corrosion resistance for indoor/protected outdoor use
  • Includes hex nut for straightforward tightening with standard tools
  • Hex nut for easy tightening
  • Removable after installation
  • 25 units per jar

Specifications

Application
Well-suited for permanently anchoring heavy equipment to concrete.
Diameter
0.500" IN
Drill Size
3/8" IN
Finish
Zinc Plated
Head Diameter
0.500" IN
Head Type
Hex Nut
Length
2.250" IN
Material
Steel
Material
Zinc
Minimum Embedment Depth
1.625" IN
Shear Strength
3250 PSI
Size
1/2 x 2-1/4" IN
Special Features
Can be removed after it's been installed. Length of the sleeve induces less stress on the substrate than does a wedge anchor/
Tension Strength
2700 PSI
Type
Concrete Anchor
Package Weight (Imperial)
3.5 lbs
This is a steel concrete anchor with a hex nut head and zinc plated finish. It is sized 1/2 x 3 in, with a 0.500 in diameter, 3.000 in length, and 3/8 in drill size. The minimum embedment depth is 1.625 in, with tension strength of 2700 and shear strength of 3250.

61830J

This is a steel concrete anchor with a hex nut head and zinc plated finish. It is sized 1/2 x 3 in, with a 0.500 in diameter, 3.000 in length, and 3/8 in drill size. The minimum embedment depth is 1.625 in, with tension strength of 2700 and shear strength of 3250.
J-Bolt, Hook Bolt, 1/4 in. diameter, 20 thread pitch/thread per inch, 1-1/2 in. thread length, 2-5/16 in. overall length, Steel, Zinc Chromate finish, 7/16 in. inside diameter, 10 per poly bag

BTJ1

J-Bolt, Hook Bolt, 1/4 in. diameter, 20 thread pitch/thread per inch, 1-1/2 in. thread length, 2-5/16 in. overall length, Steel, Zinc Chromate finish, 7/16 in. inside diameter, 10 per poly bag
Steel drop-in anchors with internal threads and a zinc plated finish. The anchor diameter is 3/8 in, length is 1-9/16 in, and the drill size is 1/2 in. Minimum embedment depth is 1.625 in.

60404J

Steel drop-in anchors with internal threads and a zinc plated finish. The anchor diameter is 3/8 in, length is 1-9/16 in, and the drill size is 1/2 in. Minimum embedment depth is 1.625 in.
Steel drop-in anchors with internal threads, sized 1/4"-20 x 1". They are zinc plated and include a setting tool. The anchor has a 3/8" drill size, 1.000" minimum embedment depth, and is intended for concrete applications based on the listed strength ratings.

60402J

Steel drop-in anchors with internal threads, sized 1/4"-20 x 1". They are zinc plated and include a setting tool. The anchor has a 3/8" drill size, 1.000" minimum embedment depth, and is intended for concrete applications based on the listed strength ratings.
Heavy duty wedge anchors designed for full-contact expansion. They are steel anchors with a zinc plated finish for use in concrete and stone. The anchor has a 1/4" diameter, 1-3/4" length, 1-1/8" minimum embedment depth, and 1/4" drill size.

62028J

Heavy duty wedge anchors designed for full-contact expansion. They are steel anchors with a zinc plated finish for use in concrete and stone. The anchor has a 1/4" diameter, 1-3/4" length, 1-1/8" minimum embedment depth, and 1/4" drill size.
Heavy-duty wedge anchors designed for full-contact expansion. They are non-bottom bearing anchors with greater shear strength than light and medium-duty expansion anchors. Made of steel with a zinc plated finish, for use in concrete and stone. The anchor is 3/8 in diameter and 2-3/4 in long, with a 1-1/2 in minimum embedment depth.

62244J

Heavy-duty wedge anchors designed for full-contact expansion. They are non-bottom bearing anchors with greater shear strength than light and medium-duty expansion anchors. Made of steel with a zinc plated finish, for use in concrete and stone. The anchor is 3/8 in diameter and 2-3/4 in long, with a 1-1/2 in minimum embedment depth.
A pre-expanded anchor bolt with a flat head and zinc plated finish. It is made of steel and measures 1/4 inch in diameter by 4 inches in length. The sheet describes it as a one-piece anchor that compresses as it is driven into the base material for heavy-duty permanent installations.

59164

A pre-expanded anchor bolt with a flat head and zinc plated finish. It is made of steel and measures 1/4 inch in diameter by 4 inches in length. The sheet describes it as a one-piece anchor that compresses as it is driven into the base material for heavy-duty permanent installations.
Heavy duty wedge anchors designed for full-contact expansion. They are made of steel with a zinc plated finish and are intended for use in concrete and stone. The anchor diameter is 1/4 in., length is 2-1/4 in., and minimum embedment depth is 1-1/8 in.

62036J

Heavy duty wedge anchors designed for full-contact expansion. They are made of steel with a zinc plated finish and are intended for use in concrete and stone. The anchor diameter is 1/4 in., length is 2-1/4 in., and minimum embedment depth is 1-1/8 in.

Frequently Asked Questions about Minerallac Company

What are the main product lines offered by Minerallac Company?

Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.

What is Minerallac Company's warranty policy?

Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.

What industries and applications are Minerallac Company products used for?

Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.

What technical support does Minerallac Company offer?

Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.

What are the key features of Minerallac Company products?

Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.

What environmental ratings do Minerallac Company products have?

Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.

What accessories are available for Minerallac Company products?

Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.

How are Minerallac Company products typically installed?

Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.

What communication protocols do Minerallac Company products support?

Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.