Authorized Minerallac Company Distributor
Minerallac Company 22816J - Machine screw with a 10-32 size and 1 inch length. It is made of steel with a zinc plated finish and has a round head with a silver head color. The drive type is a square/slotted combo, and it is intended for use with a pre-tapped hole or with a nut.
Minerallac Company

22816J

Alternate Item Number: 12111983

UPC: 085937002419

Documents & Media
Specification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Overview

The Minerallac Company 22816J is a pack of 10-32 x 1" machine screws designed for secure fastening applications. These screws feature a round head with both square and slotted drive options, offering versatility for different tooling requirements. The zinc plating provides a layer of corrosion resistance, making them suitable for general industrial and commercial use where moderate protection against environmental factors is needed. Each jar contains a quantity of these screws, ensuring you have an ample supply for your projects. The 10-32 thread size is a common standard for machine screws, facilitating compatibility with a wide range of pre-tapped holes and nuts. The 1-inch length provides sufficient engagement for most common material thicknesses. Minerallac Company is known for providing reliable fastening solutions, and the 22816J continues this tradition. These screws are ideal for assembling equipment, mounting components, and various other mechanical tasks. Their dual drive head design simplifies installation, allowing for use with either a standard slotted screwdriver or a square drive bit, which can be advantageous in situations where one type of tool is more readily available or preferred. The zinc coating is a standard finish for many fasteners, offering a balance of protection and cost-effectiveness for everyday applications.
  • 10-32 thread size for versatile machine screw applications
  • 1-inch length for adequate material engagement
  • Round head design
  • Dual drive: Square and Slotted for flexible tooling options
  • Zinc plated for corrosion resistance

Specifications

Drive Type
Square/Slotted Combo
Drive Type
Slotted;Square;Square/Slotted Combo
Driver Size
#2
Finish
Zinc Plated
Head Color
Silver
Head Diameter
0.359 in
Head Diameter
9.1186 mm
Head Height
0.137 in
Head Height
3.4798 mm
Head Type
Round Head
Length
1 in
Length
25.4 mm
Material
Steel
Size
10-32
Special Features
For use with a pre-tapped hole or with a nut.
Thread Size
32
Thread Type
2A External Threads
Type
Machine Screw
Package Weight (Imperial)
0.9 lbs
Machine screw with a round head and square/slotted combo drive. It is made of steel with a zinc plated finish and is sized 10-32 by 1/2 inch long. The screw has 2A external threads and is intended for use with a pre-tapped hole or with a nut.

22808J

Machine screw with a round head and square/slotted combo drive. It is made of steel with a zinc plated finish and is sized 10-32 by 1/2 inch long. The screw has 2A external threads and is intended for use with a pre-tapped hole or with a nut.
Tri-Drive Machine Screw, Steel material, 1/4-20 in. Size, 1 in. length, Round head, Zinc finish, Slotted/Phillips/Square drive type, 1000 per pack, including a(n) Square Drive Bit

TRM101M

Tri-Drive Machine Screw, Steel material, 1/4-20 in. Size, 1 in. length, Round head, Zinc finish, Slotted/Phillips/Square drive type, 1000 per pack, including a(n) Square Drive Bit
APO Tamper Proof Cover Screw Tool, Mill, Unpainted, Stainless Steel, 11810.025

11810.025

APO Tamper Proof Cover Screw Tool, Mill, Unpainted, Stainless Steel, 11810.025
25 PKG SCREWS & NYLON WASHER

SCREWM6-25

25 PKG SCREWS & NYLON WASHER
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 6-32 x 2.5 in, with a round head and slotted/Phillips combo drive.

52240J

Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 6-32 x 2.5 in, with a round head and slotted/Phillips combo drive.
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish and has a flat head with a slotted drive. The screw size is 1/4"-20 and the length is 1-1/4".

50920J

Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish and has a flat head with a slotted drive. The screw size is 1/4"-20 and the length is 1-1/4".
Machine screw made of steel with a zinc plated finish. It is 1/4"-20 size and 1-1/2" long, with a flat head and slotted drive. Intended for use with a pre-tapped hole or with a nut.

50924J

Machine screw made of steel with a zinc plated finish. It is 1/4"-20 size and 1-1/2" long, with a flat head and slotted drive. Intended for use with a pre-tapped hole or with a nut.
Machine screw with a round head and combo slotted/Phillips drive. It is made of steel with a zinc plated finish. The screw size is 3/8-16 x 1/2 in. and the length is 0.500 in.

53208J

Machine screw with a round head and combo slotted/Phillips drive. It is made of steel with a zinc plated finish. The screw size is 3/8-16 x 1/2 in. and the length is 0.500 in.

Frequently Asked Questions about Minerallac Company

What are the main product lines offered by Minerallac Company?

Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.

What is Minerallac Company's warranty policy?

Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.

What industries and applications are Minerallac Company products used for?

Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.

What technical support does Minerallac Company offer?

Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.

What are the key features of Minerallac Company products?

Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.

What environmental ratings do Minerallac Company products have?

Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.

What accessories are available for Minerallac Company products?

Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.

How are Minerallac Company products typically installed?

Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.

What communication protocols do Minerallac Company products support?

Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.