Mersen 60318 Fuse Block 600VAC 600VDC Class H/K 30A 3-Pole Screw with Reinforced Clip

The fuse blocks are rated for 250VAC/DC and 600VAC/DC, with amperage ratings of 30A, 60A, 100A, 200A, 400A, and 600A.

SCCR ratings are 10kA with Class H fuses, 50kA with Class K fuses, and 200kA with Class R fuses.

Insulators are either molded glass-filled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V.

All fuse blocks meet UL 4248 requirements. They are UL listed (guide IZLT, File E52283), UL recognized component (guide IZLT2, file E52283), and CSA certified class 6225 (File 32169).

30A and 60A blocks with box connectors can use Al/Cu wire from #2-14 AWG or Cu wire from #4-14 AWG. Screw and pressure plate connectors are for Cu wire #10-14 AWG.

100A blocks with box connectors can use Al/Cu wire from 2/0-#6 AWG or Cu wire from 2/0-#12 AWG. 200A blocks with side-clip connectors can use Al/Cu wire from 350kcmil-#6 AWG or Cu wire from 350kcmil-#6 AWG.

400A blocks with side-clip connectors can use Al/Cu wire from 1000-250kcmil or Cu wire from 1000-250kcmil. 600A blocks with in-line clips can use Al/Cu wire from (2) 500kcmil-#4 or Cu wire from (2) 500kcmil-#4.

Yes, adder blocks can be snapped onto 1-, 2-, or 3-pole blocks to form multi-pole segmented blocks. A 1-pole, 30A block does not accept an adder pole.

For 30A and 60A fuse blocks, there is a choice of spring reinforced or non-spring reinforced clips.

Torque recommendations vary by connector type: Box connectors are 35 in-lb for 30A and 45 in-lb for 60A. Screw connectors are 20 in-lb, and pressure plate connectors are 20 in-lb.

Mersen products are used across diverse industrial sectors including solar power, electric vehicles, buildings/construction, industrial automation, power distribution, HVAC, elevators, telecommunications, and specialty manufacturing. Key application areas include circuit protection, surge protection, battery module protection, electrical safety systems, and power management for residential, commercial, and utility-scale installations.

Mersen offers five primary electrical power product lines: IEC and UL/CSA Fuses and Fusegear, Surge Protection, Low Voltage Disconnect Switches, Power Distribution Blocks, and Engineered Solutions. Their comprehensive range includes specialized components like high-speed fuses, modular fuse holders, surge arresters, and custom-engineered electrical protection systems for industrial and power management applications.

Mersen products feature advanced electrical protection and power management solutions with key characteristics including finger-safe design, compact modularity, and high-performance safety features. Their product lines span electrical power components like fuses, surge protection, power distribution blocks, and specialized solutions for industrial, solar, and building applications. Critical features include UL/CSA approvals, high short-circuit current ratings, and innovative technologies like the Fuse Control™ program that minimize electrical risks and optimize system performance.

Mersen products meet rigorous environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13, CSA Type 1, 2, 3, 4, 4X, 12, and 13, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They feature IEC 60529 IP66 protection, with enhanced UV inhibitors for outdoor weathering and operating temperatures ranging from -40°C to 130°C (-40°F to 266°F). These ratings ensure superior protection in wet, corrosive, and challenging industrial environments.

Mersen offers multiple accessories for their fuse blocks and systems, including safety pullers (DFC3M and DFC3LP), DIN-rail adapters (DRM), bus bars, auxiliary contacts, and specialized mounting hardware. Key accessories include the DFC3M safety puller for 1-1/2" x 13/32" midget or Class CC fuses, the DRM adapter for mounting 303 series fuse blocks on DIN-rail, and UltraSafe fuse module accessories like bus bars and auxiliary contacts that enable module interconnection and monitoring.

Mersen products are typically installed in electrical distribution systems, control panels, and industrial automation environments using multiple mounting options. These include service entrance panel mounting, distribution panel installation, control panel DIN rail mounting, and custom engineered solutions like Fused Coordination Panelboards. Installation depends on the specific product type, such as fuses, surge protective devices, or switches, and is designed to provide electrical protection and circuit safety in various industrial and commercial applications.

Mersen products are certified to multiple international standards, including UL (Underwriters Laboratories), CSA (Canadian Standards Association), CCC (China Compulsory Certification), and EAC (Eurasian Conformity). Our products meet rigorous safety and performance standards for industrial applications across North America, China, Russia, and other global markets, ensuring compliance and reliability in electrical power and advanced materials solutions.

Mersen provides comprehensive technical support through multiple channels, including technical experts located in your time zone who can assist with product selection, application guidance, and troubleshooting. Their Fuse Control™ program offers a free Fuse Inventory Audit & Analysis, and customers can access technical resources through their sales representatives and online platform ep.mersen.com.