Mencom Corporation MIN-5MR-3A - MIN Size I, Receptacle, 5 Pole, Male Straight, 3 Ft, 16awg, 8A, .5-NPT, Front Mount, Aluminum Clear Anodized
Mencom Corporation

MIN-5MR-3A

Documents & Media
BrochureTechnical DrawingLine DrawingManufacturer Product Website

Contact for Pricing

Overview

Mencom MIN-5MR-3A is a 5-pole MIN Size I male straight receptacle designed for front mount applications in industrial environments. This connector features a 3-foot 16 AWG cable with a current rating of 8A, making it suitable for low-power signal and control circuits. The aluminum clear anodized housing provides corrosion resistance and durability, while the .5-NPT thread ensures secure mounting in panel applications. With a compact 7/8" (MIN Size I) profile, these connectors are ideal for space-constrained installations where reliable connectivity is critical. The front mount design allows for easy access and maintenance, reducing downtime in production environments. Mencom offers this connector in multiple configurations, including field-wired and molded cable options, to meet diverse application requirements. Compatible with standard MIN Size I housings, the MIN-5MR-3A supports plug-and-play connectivity for systems requiring 2-6 contacts, streamlining installation and reducing wiring complexity. Typical applications include industrial automation, control panels, sensor interfaces, and equipment interconnects where consistent signal integrity is essential. The MIN-5MR-3A is specifically a receptacle, meaning it accepts a male plug. The straight configuration of the male receptacle ensures a direct connection without any angular deviation. The 16 AWG wire gauge is robust for its 8A current rating, providing a reliable conductor for signal transmission. The clear anodized finish on the aluminum housing not only enhances its aesthetic appeal but also provides a protective layer against environmental factors commonly found in industrial settings. The .5-NPT thread size is a standard for many industrial conduit and fitting applications, ensuring compatibility with a wide range of mounting hardware. The MIN Size I designation refers to the specific form factor of the connector, which is part of Mencom's MIN connector series, known for its compact and robust design. This front mount capability means the connector is designed to be installed and accessed from the front of a panel, simplifying installation and maintenance procedures.
  • 5-pole MIN Size I male straight receptacle for front mount applications
  • 3 ft 16 AWG cable with 8A current rating for low-power circuits
  • Aluminum clear anodized housing for corrosion resistance and durability
  • .5-NPT thread for secure panel mounting
  • Compact 7/8" profile for space-constrained installations

Specifications

Connection Type
16 AWG Cable
Current Rating
8A
Material
Aluminum
Mounting Type
Front Mount
Poles
5
Series
MIN Size I
Size
7/8" (MIN Size I)
600T Modified for Switchboard Users

600T-MOD

600T Modified for Switchboard Users
Wall Plate Screw, #6-32 size, Oval head, 1 in. length, White head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack

SP279

Wall Plate Screw, #6-32 size, Oval head, 1 in. length, White head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack
One-Gang Nail-On New Work Outlet Box, Volume 18 Cubic Inches, Length 3-3/4 Inches, Width 2-1/4 Inches, Depth 2-7/8 Inches, Color Blue, Material PVC, Mounting Means Captive Nails

B118A

One-Gang Nail-On New Work Outlet Box, Volume 18 Cubic Inches, Length 3-3/4 Inches, Width 2-1/4 Inches, Depth 2-7/8 Inches, Color Blue, Material PVC, Mounting Means Captive Nails
One-Gang Box Cover, Volume 8.1 Cubic Inches, 4 Inches Square, Raised 1-1/4 Inch, Color Blue, Material Non-Metallic

A414

One-Gang Box Cover, Volume 8.1 Cubic Inches, 4 Inches Square, Raised 1-1/4 Inch, Color Blue, Material Non-Metallic
One-Gang Low-Voltage Adjustable Bracket, Color Orange, Material Non-Metallic

SC100ADJC

One-Gang Low-Voltage Adjustable Bracket, Color Orange, Material Non-Metallic
One-Gang Low-Voltage Old Work Bracket, Length 4.32 Inches, Width 2.52 Inches, Depth 1.66 Inches, Color Orange, Material Non-Metallic

SC100RR

One-Gang Low-Voltage Old Work Bracket, Length 4.32 Inches, Width 2.52 Inches, Depth 1.66 Inches, Color Orange, Material Non-Metallic
One-Gang Box Cover, Volume 3.5 Cubic Inches, 4 Inches Square, Raised 1/2 Inch, Color Blue, Material Non-Metallic

A410R-CAR

One-Gang Box Cover, Volume 3.5 Cubic Inches, 4 Inches Square, Raised 1/2 Inch, Color Blue, Material Non-Metallic
Two-Gang Nail-On New Work Outlet Box, Volume 32 Cubic Inches, Length 3-3/4 Inches, Width 4 Inches, Depth 3 Inches, Color Blue, Material PVC, Mounting Means Captive Nails

B232ACP

Two-Gang Nail-On New Work Outlet Box, Volume 32 Cubic Inches, Length 3-3/4 Inches, Width 4 Inches, Depth 3 Inches, Color Blue, Material PVC, Mounting Means Captive Nails
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD350-6

The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.

PH10-38R-E

Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A

Frequently Asked Questions about Mencom Corporation

What accessories are available for Mencom Corporation products?

Mencom Corporation offers a comprehensive range of accessories across multiple product lines, including junction blocks, port adapters, panel interface connectors, cable glands, field wireables, and various connector accessories. Specific accessory options include custom cable lengths, over-molding, plug & play customization, terminal additions (ring, spade, ferrules), and mounting options like ½" NPT, M20, M25, panel mount, and back mount configurations.

How are Mencom Corporation products typically installed?

Mencom Corporation products are typically installed using multiple mounting options, including panel mount, DIN rail, and field wireable configurations. Their connectors feature versatile mounting solutions like 1/2" NPT, M20, M25, panel mount, and back mount options. Installation depends on the specific product series, such as MIN Power, MIL-Spec, Micro, or Panel Interface Connectors, with each line offering precise, application-specific installation methods.

What industries and applications are Mencom Corporation products used for?

Mencom Corporation products are used across multiple industrial automation and control sectors, including manufacturing, process control, industrial networking, and panel interface applications. Their product lines cover critical connectivity needs such as Ethernet networking, power distribution, field wireable connectors, solenoid valve connections, cable glands, and panel interface connectors for PLC, computer, and programmable device systems in harsh industrial environments.

What technical support does Mencom Corporation offer?

Mencom Corporation offers industry-leading technical support through multiple channels. During business hours, customers receive live support from experienced inside sales representatives and account specialists who can assist with quotes, order expediting, connector customization, and technical design challenges. Their engineering team provides expert support for custom connectivity solutions, including cable modifications, over-molding, termination options, and collaborative design assistance.

What are the main product lines offered by Mencom Corporation?

Mencom Corporation offers a comprehensive range of industrial connection products across multiple series, including MIN Series, MIL-Spec Series, Micro Series, NAN Series, Bus Series, and specialized connector types. Key product lines include Junction Blocks, Solenoid Valve Connectors, Cable Glands, Panel Interface Connectors, T35 DIN Rail Connectors, and network connectivity solutions for DeviceNet, Ethernet, Foundation Fieldbus, and Profibus protocols. Their product families cover various sizes and configurations, such as Micro-AC, Micro-DC, Euro-AC, and Power series connectors with options for M16, M23, and M27 connector types.

What are the key features of Mencom Corporation products?

Mencom Corporation offers comprehensive industrial electrical connection solutions featuring high-quality, flexible connectivity products across multiple series including MIN, MIL-Spec, Micro, Nano, and Network connector lines. Key product features include custom cable lengths, over-molded cables, field wireable connectors, panel interface connectors, and versatile mounting options like ½" NPT, M20, and panel mount configurations. Their products support various industrial applications with configurations in straight and right angle designs, utilizing jacket materials like PVC, PUR, and TPE.

What communication protocols do Mencom Corporation products support?

Mencom Corporation products support multiple critical industrial communication protocols, including Modbus RTU, Modbus TCP/IP, PROFIBUS, PROFINET, DeviceNet, and EtherNet/IP. These protocols enable flexible network integration across diverse industrial automation systems, providing comprehensive connectivity and seamless communication capabilities for manufacturing and process control environments.

What certifications and standards do Mencom Corporation products comply with?

Mencom Corporation products are UL certified (UL File #E149111) and offer comprehensive compliance across industrial automation standards. Our product lines meet critical certifications including NEMA (Types 4, 4X, 6, 6P), IP ratings (IP65, IP66, IP67, IP69K), and support multiple industrial communication protocols such as DeviceNet, Ethernet, Foundation Fieldbus, Profibus-DP, and Profibus-PA.