Authorized Meltric Distributor
Meltric 28-18162 - INLET

Meltric 28-18162 INLET

UPC: 784474091732


Documents & Media
BrochureTechnical DrawingInstallation InstructionsLine Drawing

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The Meltric 28-18162 DXA1 is a 2-pole plus ground (2P+G) metal inlet rated for 20 Amps at 208 Volts AC and 60 Hertz. Part of Meltric’s DXA1 series, this inlet features a durable black finish and IP66/67 environmental protection for industrial use. Designed with a size 2 housing, it provides a reliable power connection in demanding environments. Manufactured in the US, SKU 28-18162 is a catalog-standard component for secure power delivery.
  • 2-pole plus ground (2P+G) configuration
  • Rated 20A at 208VAC, 60Hz
  • IP66/67 environmental protection
  • Durable black finish with size 2 housing
  • Manufactured in the US by Meltric

Specifications

Color
Black
Current Rating
20 A
Frequency
60 Hz
Ip Rating
IP66/IP67
Material
Metal
Poles
2P+G
Series
DXA1
Size
Size 2
Voltage Rating
208 VAC
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705010R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Modular Emergency Stop - Twist release - Mushroom 40mm - Red - Non-illuminated - - No contact block

MPET4-10R

Modular Emergency Stop - Twist release - Mushroom 40mm - Red - Non-illuminated - - No contact block
MINICONTACTOR BU CWC016-00-22R03

CWC016-00-22R03

MINICONTACTOR BU CWC016-00-22R03
HPS Open Style Control Transformer, 150VA 240x480V-120x240V 50/60Hz

C2G0150MQMJ

HPS Open Style Control Transformer, 150VA 240x480V-120x240V 50/60Hz
Power supply for DIN-rail

PS-60

Power supply for DIN-rail
BK63H 1P B2A 10kA 120/240VAC UL1077

0626030563

BK63H 1P B2A 10kA 120/240VAC UL1077
GMD-16M DC240V 3W 1b EXP (GMD16M-30-01-UD-3W-S-E)

1270040900

GMD-16M DC240V 3W 1b EXP (GMD16M-30-01-UD-3W-S-E)
ACS380 AC Drive, 3-380-480V In, 3HP, 6A, Type OPEN, 1.5 overload, Integrated, HxWxD 6.69x2.76x7.52 in, Module

ACS380-040S-07A2-4

ACS380 AC Drive, 3-380-480V In, 3HP, 6A, Type OPEN, 1.5 overload, Integrated, HxWxD 6.69x2.76x7.52 in, Module
C.BREAKER TMAX XT2N 125 UL/CSA FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMA R 90 I3=450...900 A

XT2NU3090BFF000XXX

C.BREAKER TMAX XT2N 125 UL/CSA FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMA R 90 I3=450...900 A
The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.

NNC75X75WH2

The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.
MMS-63H 40A EXP

0706001600

MMS-63H 40A EXP
General Electric Control Products. Nema Power Devices. Ol Relay 610F8364

CR324E610F

General Electric Control Products. Nema Power Devices. Ol Relay 610F8364

Frequently Asked Questions

Can hazardous location devices be returned?

No, devices rated for hazardous locations, such as this product, are not returnable.

What are the voltage and polarity for 28-18162?

Product 28-18162 is rated for 208 V with a 2P+G polarity configuration.

What hazardous location certifications does it have?

It has CSA and ATEX hazardous location listings, including Ex de IIC T*Gb and Ex tb IIIC T*Db.

What is the environmental watertightness rating?

The product has an IP66/IP67 watertightness rating, achieved when the plug is latched to the receptacle.

What is the operating temperature range?

The operating temperature range is a minimum of -67°F and a maximum of 140°F.

What is the wiring capacity for this product?

The wiring capacity, based on THHN wire sizes, is a minimum of 16 AWG and a maximum of 10 AWG.

What is the short circuit rating?

The short circuit rating is 25 kA Close & Withstand, tested with an RK1 30 A fuse.

Does the product have a locking feature?

Yes, it includes dual pawls with a locking feature for secure connections and a provision for a locking pin or padlock.

Is a cord grip included with the product?

No, a cord grip is not included. Its size is determined by the cable diameter and must be selected separately.

What type of product is 28-18162?

Product 28-18162 is a DXA1 series device, rated for hazardous locations and 20 A.

How to Install the DXA Decontactor

This guide provides step-by-step instructions for installing and wiring the DXA Decontactor in industrial applications, ensuring compliance with safety standards.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Color-coded gaskets

  1. Mount the receptacle

    Install the receptacle at a downward angle with the latching pawls at the top and bottom. Ensure it is securely attached to the mounting surface.

  2. Prepare the conductors

    Remove the outer sheath of the cable and strip the conductor insulation to the length specified in Table T2. Ensure the cable sheathing extends through the cord grip.

  3. Connect the conductors

    Insert the stripped conductors into the terminals without completely removing the terminal screws. Tighten the screws to the specified torque in Table T2.

  4. Establish grounding connections

    Connect all metal parts to ground using the provided ground terminals. Ensure the factory-wired ground connection remains intact.

  5. Install color-coded gaskets

    Insert the color-coded gaskets between the device and its rear accessory to maintain the IP rating. Position the protrusions on the latch sides.

  6. Verify connections

    Use a multimeter to check the continuity of the ground circuit and ensure all connections are secure before powering on the device.

  7. Calibrate the device

    Follow the manufacturer's guidelines to calibrate the device settings as required for your specific application.

Frequently Asked Questions about Meltric

What certifications and standards do Meltric products comply with?

Meltric products are rigorously certified and comply with multiple critical industrial standards, including UL 2682, UL 508, UL 98, UL 1682, and CSA 22.2 No. 182.1. Their devices are UL and CSA listed with comprehensive ratings covering electrical endurance, short circuit withstand capabilities, motor circuit disconnect switching, and environmental protection standards like Type 4X/IP69/IP69K. Specific certifications include switch-rated plug and receptacle listings that exceed standard industry requirements.

What are the key features of Meltric products?

Meltric products feature advanced safety and reliability technologies, including spring-assisted terminals, push-button circuit disconnection, enclosed arc chambers, and integrated lockout-tagout capabilities. Key innovations include silver-nickel butt-style contacts, a quick-break mechanism that disconnects circuits in 15 milliseconds, and a self-cleaning contact system. Most devices offer modular construction, optional auxiliary contacts, and automatic watertightness, with robust casings made of fiberglass-reinforced thermoplastic polyamide that resist impact and harsh environments.

What environmental ratings do Meltric products have?

Meltric products feature robust environmental ratings, including Type 4X/IP69/IP69K certification, which also meets IP66/IP67 requirements. Their devices are rated to operate in temperatures from -40°F to 140°F, with specific IK ratings for impact resistance ranging from 08 to 10 Joules depending on the product material and model. Metal-cased products typically have higher impact resistance (IK10 with 20 Joules) compared to polymer-based products (IK09 with 10 Joules).

What industries and applications are Meltric products used for?

Meltric products are used across multiple heavy industrial and hazardous environments, including chemical plants, pharmaceutical facilities, oil and gas operations, grain silos, wood processing plants, plastics manufacturing, and wastewater treatment facilities. Their specialized plugs and receptacles are engineered for high-amperage equipment, wet/washdown environments, and locations with explosive gas or dust risks, with specific product lines like DSN and DS Series designed for different industrial applications ranging from 75-100 horsepower equipment.

What technical support does Meltric offer?

Meltric offers comprehensive technical support through multiple channels. Their Customer Service group provides immediate phone support at 800-433-7642, with trained representatives located at their manufacturing facility. Additionally, Meltric's engineering team offers specialized application support, custom design solutions, and can help integrate Meltric and third-party components into power distribution products.

What are the main product lines offered by Meltric?

Meltric offers a comprehensive range of industrial electrical plugs and receptacles across several key product lines: Switch-Rated Plugs & Receptacles (DSN and DS series from 20-200A), Multipin Connectors (6-37 pin, 2-50A), Standard Duty Plugs & Receptacles (DR, PN, DSDC series), High Ampacity Plugs & Receptacles (PF/PFQ, DR400, CS1000, SP series from 300-600A), and specialized options like RETTBOX electromagnetic self-ejection devices and PNHT high-temperature connectors.

What accessories are available for Meltric products?

Meltric offers a comprehensive range of accessories for their industrial plugs and receptacles, including handles, angle adapters, junction boxes, poly conduit entry boxes, finger drawplates, and protective/padlockable inlet/plug caps. These modular accessories allow customers to customize their electrical connection solutions, with options like 30° and 70° angles, metal and poly configurations, and additional features such as auxiliary contacts and locking mechanisms.

How are Meltric products typically installed?

Meltric products are typically installed by inserting the plug into the receptacle with a simple 30-degree clockwise rotation, which latches the connection and energizes the circuit. The installation process is designed for safety, featuring automatic watertight sealing, dead-front safety shutters, and spring-loaded butt-style contacts that ensure optimal electrical performance. For motor change-outs, qualified workers follow a specific procedure including verifying de-energization, applying lockout/tagout, and carefully inserting the plug into the receptacle.

What is Meltric's warranty policy?

Meltric offers a comprehensive 5-year warranty on electrical contacts for all its plug and receptacle products. This warranty reflects the company's confidence in the durability and high-quality design of their electrical components, which are engineered to provide superior performance and reliability in industrial applications.