Authorized Meltric Distributor
Meltric 28-17167 - RECEPTACLE/ANGLE ADAPTER

Meltric 28-17167 RECEPTACLE/ANGLE ADAPTER

UPC: 784474092036


Documents & Media
BrochureTechnical DrawingInstallation InstructionsLine Drawing

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The Meltric DXA1 Receptacle/Angle Adapter (SKU 28-17167) is a metal-bodied 90-degree electrical connector for industrial power distribution. Rated 20A at 208VAC, 60Hz, it supports 3 poles plus neutral and ground (3P+N+G) in a Size 2 footprint. The black metal housing resists mechanical stress and corrosion while dissipating heat better than plastic alternatives. Compact Size 2 design simplifies angled wiring in control panels, machinery, and distribution systems to reduce cable strain.
  • 90-degree angle transition for reduced cable strain
  • Rated 20A at 208VAC, 60Hz, 3P+N+G configuration
  • Metal construction with black finish for durability and heat dissipation
  • Size 2 compact design for space-efficient installations
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705010R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Modular Emergency Stop - Twist release - Mushroom 40mm - Red - Non-illuminated - - No contact block

MPET4-10R

Modular Emergency Stop - Twist release - Mushroom 40mm - Red - Non-illuminated - - No contact block
MINICONTACTOR BU CWC016-00-22R03

CWC016-00-22R03

MINICONTACTOR BU CWC016-00-22R03
HPS Open Style Control Transformer, 150VA 240x480V-120x240V 50/60Hz

C2G0150MQMJ

HPS Open Style Control Transformer, 150VA 240x480V-120x240V 50/60Hz
Power supply for DIN-rail

PS-60

Power supply for DIN-rail
BK63H 1P B2A 10kA 120/240VAC UL1077

0626030563

BK63H 1P B2A 10kA 120/240VAC UL1077
GMD-16M DC240V 3W 1b EXP (GMD16M-30-01-UD-3W-S-E)

1270040900

GMD-16M DC240V 3W 1b EXP (GMD16M-30-01-UD-3W-S-E)
ACS380 AC Drive, 3-380-480V In, 3HP, 6A, Type OPEN, 1.5 overload, Integrated, HxWxD 6.69x2.76x7.52 in, Module

ACS380-040S-07A2-4

ACS380 AC Drive, 3-380-480V In, 3HP, 6A, Type OPEN, 1.5 overload, Integrated, HxWxD 6.69x2.76x7.52 in, Module
C.BREAKER TMAX XT2N 125 UL/CSA FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMA R 90 I3=450...900 A

XT2NU3090BFF000XXX

C.BREAKER TMAX XT2N 125 UL/CSA FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMA R 90 I3=450...900 A
The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.

NNC75X75WH2

The NNC75X75WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95 C (203 F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 2.85" x 2.97" (72.4 mm x 75.4 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.
MMS-63H 40A EXP

0706001600

MMS-63H 40A EXP
General Electric Control Products. Nema Power Devices. Ol Relay 610F8364

CR324E610F

General Electric Control Products. Nema Power Devices. Ol Relay 610F8364

Frequently Asked Questions

What is the voltage and polarity for product 28-17167?

Product 28-17167 is rated for 208 V with a 3P+N+G polarity.

What hazardous location certifications does DXA1 have?

The DXA1 has CSA and ATEX hazardous location listings, including Ex de IIC T*Gb and Ex tb IIIC T*Db ratings.

What material are the DXA1 contacts made from?

The DXA1 uses silver-nickel contact material, which provides superior conductivity, durability, and corrosion resistance.

What is the short circuit rating for the DXA1?

The DXA1 has a short circuit rating of 25 kA Close & Withstand, tested with RK1 30 A fuses.

Does the DXA1 have a locking feature?

Yes, the DXA1 features dual pawls with a locking provision for inserting a locking pin or padlock to prevent inadvertent disconnection.

What are the horsepower ratings for the DXA1?

The DXA1 has horsepower ratings of 0.75 hp and 2 hp for 1-phase, and 3 hp and 10 hp for 3-phase applications.

What is the standard threading for DXA1 connectors and plugs?

DXA1 connectors and plugs come standard with 1/2 inch threading.

What is the standard threading for DXA1 receptacles and inlets?

DXA1 Receptacle/Wall Box and Inlet/Wall Box come standard with 1/2 inch threading on the bottom.

What is the casing material of the DXA1 product line?

The DXA1 product line features robust metal casings, specifically made of aluminum, to withstand harsh environments.

Are cord grips included with DXA1 devices?

No, cord grips are not included with DXA1 devices. They must be selected separately based on cable diameter from the Cord Grip section.

How to Install the DXA Controller

This guide provides step-by-step instructions for installing and wiring the DXA Controller in industrial applications, ensuring safe operation in potentially explosive atmospheres.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Color-coded gaskets

  1. Mount the controller

    Install the receptacle at a downward angle with the latching pawls at the top and bottom. Secure it firmly to the panel or DIN rail.

  2. Prepare the wiring

    Remove the outer sheath of the cable to the appropriate length and strip the conductor insulation as indicated in Table T2. Ensure the cable sheathing extends through the cord grip.

  3. Connect the ground

    Connect all metal parts to ground using the provided ground terminals. Ensure the factory-wired ground connection remains intact.

  4. Wire the terminals

    Insert the prepared conductors into the contact terminals without fully removing the terminal screws. Tighten the screws to the specified torque in Table T2.

  5. Install color-coded gaskets

    Insert the color-coded gaskets between the device and its rear accessory to maintain the IP rating. Position the protrusions on the latch sides.

  6. Verify connections

    Use a multimeter to check the continuity of the ground circuit and ensure all connections are secure and properly tightened.

  7. Calibrate the device

    Follow the manufacturer's guidelines to perform any necessary calibration of the DXA Controller after installation.

Frequently Asked Questions about Meltric

What certifications and standards do Meltric products comply with?

Meltric products are rigorously certified and comply with multiple critical industrial standards, including UL 2682, UL 508, UL 98, UL 1682, and CSA 22.2 No. 182.1. Their devices are UL and CSA listed with comprehensive ratings covering electrical endurance, short circuit withstand capabilities, motor circuit disconnect switching, and environmental protection standards like Type 4X/IP69/IP69K. Specific certifications include switch-rated plug and receptacle listings that exceed standard industry requirements.

What are the key features of Meltric products?

Meltric products feature advanced safety and reliability technologies, including spring-assisted terminals, push-button circuit disconnection, enclosed arc chambers, and integrated lockout-tagout capabilities. Key innovations include silver-nickel butt-style contacts, a quick-break mechanism that disconnects circuits in 15 milliseconds, and a self-cleaning contact system. Most devices offer modular construction, optional auxiliary contacts, and automatic watertightness, with robust casings made of fiberglass-reinforced thermoplastic polyamide that resist impact and harsh environments.

What environmental ratings do Meltric products have?

Meltric products feature robust environmental ratings, including Type 4X/IP69/IP69K certification, which also meets IP66/IP67 requirements. Their devices are rated to operate in temperatures from -40°F to 140°F, with specific IK ratings for impact resistance ranging from 08 to 10 Joules depending on the product material and model. Metal-cased products typically have higher impact resistance (IK10 with 20 Joules) compared to polymer-based products (IK09 with 10 Joules).

What industries and applications are Meltric products used for?

Meltric products are used across multiple heavy industrial and hazardous environments, including chemical plants, pharmaceutical facilities, oil and gas operations, grain silos, wood processing plants, plastics manufacturing, and wastewater treatment facilities. Their specialized plugs and receptacles are engineered for high-amperage equipment, wet/washdown environments, and locations with explosive gas or dust risks, with specific product lines like DSN and DS Series designed for different industrial applications ranging from 75-100 horsepower equipment.

What technical support does Meltric offer?

Meltric offers comprehensive technical support through multiple channels. Their Customer Service group provides immediate phone support at 800-433-7642, with trained representatives located at their manufacturing facility. Additionally, Meltric's engineering team offers specialized application support, custom design solutions, and can help integrate Meltric and third-party components into power distribution products.

What are the main product lines offered by Meltric?

Meltric offers a comprehensive range of industrial electrical plugs and receptacles across several key product lines: Switch-Rated Plugs & Receptacles (DSN and DS series from 20-200A), Multipin Connectors (6-37 pin, 2-50A), Standard Duty Plugs & Receptacles (DR, PN, DSDC series), High Ampacity Plugs & Receptacles (PF/PFQ, DR400, CS1000, SP series from 300-600A), and specialized options like RETTBOX electromagnetic self-ejection devices and PNHT high-temperature connectors.

What accessories are available for Meltric products?

Meltric offers a comprehensive range of accessories for their industrial plugs and receptacles, including handles, angle adapters, junction boxes, poly conduit entry boxes, finger drawplates, and protective/padlockable inlet/plug caps. These modular accessories allow customers to customize their electrical connection solutions, with options like 30° and 70° angles, metal and poly configurations, and additional features such as auxiliary contacts and locking mechanisms.

How are Meltric products typically installed?

Meltric products are typically installed by inserting the plug into the receptacle with a simple 30-degree clockwise rotation, which latches the connection and energizes the circuit. The installation process is designed for safety, featuring automatic watertight sealing, dead-front safety shutters, and spring-loaded butt-style contacts that ensure optimal electrical performance. For motor change-outs, qualified workers follow a specific procedure including verifying de-energization, applying lockout/tagout, and carefully inserting the plug into the receptacle.

What is Meltric's warranty policy?

Meltric offers a comprehensive 5-year warranty on electrical contacts for all its plug and receptacle products. This warranty reflects the company's confidence in the durability and high-quality design of their electrical components, which are engineered to provide superior performance and reliability in industrial applications.