Authorized Littelfuse Distributor
Littelfuse T4800.0070 - Load Sharer. 100/110V 5A. The T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units). The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.

Littelfuse T4800.0070 Load Sharer. 100/110V 5A. The T4800 is designed to control a generator operating in…

UPC: 079458963397


Documents & Media
Brochure

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The Littelfuse T4800.0070 Load Sharer is a precision-engineered control unit designed to optimize generator performance in parallel operations, ensuring seamless integration with grid systems or multiple generator setups. As a critical component in distributed power systems, the T4800.0070 continuously monitors active current levels and compares them against an external DC reference signal connected to the parallel lines input. This dynamic adjustment mechanism enables the device to regulate generator speed through the governor interface, maintaining optimal load distribution and system stability. Engineered for 100/110V 5A systems, the T4800.0070 is ideal for industrial and commercial applications requiring reliable parallel generator management. Its two built-in relays provide proportional pulse signals, with strength and width directly proportional to frequency and phase deviations, ensuring precise control over generator output. For systems utilizing electronic speed controllers, the E7800 Motorised Potentiometer can be integrated to adapt contact pulses into a compatible signal, enhancing flexibility in modern power management architectures. Key applications include: - **Grid-parallel operations**: Seamlessly synchronize generators with utility power to support peak shaving, load shedding, or backup power scenarios. - **Parallel generator setups**: Enable multiple generators to operate in unison, distributing load efficiently while preventing overloading of any single unit. - **Industrial facilities**: Support critical infrastructure such as data centers, manufacturing plants, and healthcare campuses where uninterrupted power is essential. - **Renewable energy integration**: Facilitate hybrid systems combining diesel generators with solar or wind power, optimizing energy mix and reducing operational costs. - **Marine and offshore platforms**: Ensure stable power distribution in vessel or platform environments where space and reliability are paramount. The T4800.0070 is part of Littelfuse’s trusted portfolio of power management solutions, a manufacturer renowned for innovation and reliability in industrial electrical protection and control. With decades of expertise in developing products for harsh environments, Littelfuse delivers solutions that meet the rigorous demands of professionals who prioritize performance, safety, and longevity. Installation is straightforward, with clear interface options for governors, external references, and speed controllers, making it a versatile choice for both new installations and retrofits. Professionals select the T4800.0070 for its ability to enhance system efficiency by ensuring generators operate at optimal load levels, reducing fuel consumption and wear while extending equipment lifespan. Its compatibility with both conventional and electronic governor systems, combined with Littelfuse’s reputation for quality, makes it a preferred solution for engineers and technicians tasked with designing robust, scalable power distribution networks.
  • Continuously monitors active current and compares to external DC reference for precise load balancing
  • Two built-in relays provide proportional pulse signals for governor speed adjustment
  • Compatible with conventional governors and electronic speed controllers via E7800 Motorised Potentiometer
  • Ideal for grid-parallel, multi-generator, and hybrid renewable energy systems
  • Engineered by Littelfuse for reliability in industrial and commercial power management

Specifications

Application
Industrial
Brand Name
Littelfuse
Current Rating
5A
Series
T4800
Special Features
High Quality
Sub Brand
Relay Series
Type
Protection Relays and Controls
Voltage Rating
100/110V
RTXD Extractor Tool

6896057-1

RTXD Extractor Tool
Relay Accessories, Sockets & Clips, Printed Circuit Board, Phenolic, Printed Circuit Board, 6, Socket, Potter & Brumfield R10

1-1393143-3

Relay Accessories, Sockets & Clips, Printed Circuit Board, Phenolic, Printed Circuit Board, 6, Socket, Potter & Brumfield R10
Relay Accessories, Sockets & Clips, Solder, Polyester, Printed Circuit Board, 2, Socket, Potter & Brumfield R10

1-1393143-6

Relay Accessories, Sockets & Clips, Solder, Polyester, Printed Circuit Board, 2, Socket, Potter & Brumfield R10
Power supply for DIN-rail

PS-60

Power supply for DIN-rail
IP67 SCP-X Extreme Environment Series Power Supply. Double Stacked, Output Power 2 x 100W, Output Voltage 24 Vdc, Output Current 7.6 A total, 3.8 A per pair

SCP102D24X-C02

IP67 SCP-X Extreme Environment Series Power Supply. Double Stacked, Output Power 2 x 100W, Output Voltage 24 Vdc, Output Current 7.6 A total, 3.8 A per pair

Frequently Asked Questions

What types of fuses does Littelfuse offer for industrial applications?

Littelfuse offers UL Class fuses, high-speed fuses, medium voltage fuses, 10 x 38 mm fuses, and solar fuses for industrial applications.

What are Littelfuse high-speed fuses used for?

High-speed fuses protect critical power semiconductor devices against short circuits in power conversion applications like inverters and variable-speed drives.

What is the voltage range for Littelfuse solar fuses?

Littelfuse offers solar fuses and holders up to 1500 Vdc for both high-current and low-current applications.

What protection do feeder protection relays offer?

Feeder protection relays protect circuits from overcurrent, ground faults, phase loss, overload, and other detrimental conditions.

What is the Industrial Shock-Block® GFCI designed for?

It is designed for people protection in industrial facilities and meets UL Standard 943C Class C and Class D.

What do Littelfuse voltage monitors protect against?

Voltage monitors provide protection against both supply line and load side faults when the motor is running.

How do arc-flash protection relays enhance safety?

These relays detect developing arc-flash incidents and send a trip signal to interrupt power before significant damage occurs.

What types of protection do Littelfuse motor protection relays offer?

They offer voltage monitors, current monitors, and Bluetooth-enhanced overload relays for low and medium voltage applications.

What is the purpose of Littelfuse Techline support?

Techline experts answer questions about product cross-references, general technical information, engineering drawings, and application assistance.

What applications are 10 x 38 mm fuses suitable for?

These fuses provide compact supplemental protection for a wide variety of applications, available in time-delay or fast-acting versions.

Frequently Asked Questions about Littelfuse

What certifications and standards do Littelfuse products comply with?

Littelfuse products are certified to multiple international standards, including UL (Underwriters Laboratories), CSA (Canadian Standards Association), CCC (China Compulsory Certification), and EAC (Eurasian Conformity). Customers can verify specific product certifications by consulting individual product datasheets on Littelfuse.com, which provide comprehensive details about standards compliance for each component.

What industries and applications are Littelfuse products used for?

Littelfuse products are critical for electrical protection and safety across multiple industrial sectors, including manufacturing, automation, power distribution, and electrical control systems. Their comprehensive product portfolio serves industries that require robust electrical protection, including motor and pump applications, solar installations, programmable logic controllers (PLCs), electrical switch panels, and critical infrastructure environments. Key product lines protect against overcurrent, voltage transients, ground faults, and temperature-related electrical risks, ensuring equipment safety and operational reliability.

What technical support does Littelfuse offer?

Littelfuse offers comprehensive technical support through multiple channels. Their Technical Hotline (800-TEC-FUSE) provides direct access to engineers who can help identify issues and recommend solutions. Additionally, Littelfuse offers extensive online Technical Resources at Littelfuse.com, including datasheets, product manuals, whitepapers, application guides, and online design tools. Their experienced product and application engineers also provide step-by-step support from design to installation.

What are the main product lines offered by Littelfuse?

Littelfuse offers comprehensive industrial protection and control product lines, including fuses, fuse holders, protection relays, temperature sensors, and electrical safety components. Their key product categories span surge protective devices, custom OEM products, electrical switch panels, medium voltage fuses, ground-fault protection relays, motor and pump protection devices, and temperature sensors. These products are designed to minimize electrical safety hazards, limit equipment damage, improve productivity, and safeguard personnel from electrical faults.

What are the key features of Littelfuse products?

Littelfuse products feature exceptional circuit protection technologies with key characteristics including UL/IEC safety standard compliance, low internal resistance, and advanced protective capabilities across multiple product lines. Their components provide critical protection for industrial systems, offering features like overcurrent protection, voltage transient suppression, and resettable protection devices with ultra-low resistance and compact designs. Key product lines include fuses, metal oxide varistors (MOVs), TVS diodes, PolySwitch devices, and specialized electronic protection components that enhance system reliability and safety.

What environmental ratings do Littelfuse products have?

Littelfuse products feature comprehensive environmental ratings, including NEMA Type 1, 2, 3, 3R, 4/4X, 12, and 13 certifications, as well as IP65 protection. These ratings ensure superior protection in diverse industrial environments, with an operating temperature range of -40°F to +131°F (-40°C to +55°C). Many products also include UV-stabilized materials and neoprene gaskets for enhanced durability in outdoor and challenging conditions.

What accessories are available for Littelfuse products?

Littelfuse offers several key accessories across their product lines, including fuse holders, voltage monitoring modules, and terminal connectors. Specific accessories include the LPSM003ZXID (indicating) and LPSM003Z (non-indicating) POWR-SAFE Dead Front fuse holders for Class CC and Midget-Style fuses, the VRM6048 voltage monitor accessory module, and female quick connect terminals (P1015 series) in various wire gauge sizes. These accessories are designed to enhance protection, monitoring, and connectivity for Littelfuse electrical components.

What is Littelfuse's warranty policy?

Littelfuse provides comprehensive warranty details on their official website at www.littelfuse.com/warranty. Customers should visit this page to review the specific warranty terms and conditions for their specific product lines. For direct warranty support or questions, customers can contact Littelfuse Technical Support at 1-800-TEC-FUSE or email [email protected].

What communication protocols do Littelfuse products support?

Littelfuse supports a comprehensive range of industrial communication protocols, including PROFIBUS, PROFINET, EtherNet/IP, DeviceNet, Modbus RTU, and CANopen. Our products provide flexible connectivity solutions across multiple industrial automation platforms, enabling seamless integration with various control systems and network architectures.

How are Littelfuse products typically installed?

Littelfuse products are typically installed using specialized mounting hardware like fuse holders, blocks, and panels designed for specific industrial applications. The POWR-SAFE Dead Front holders, for example, provide optimum protection for Class CC and Midget-Style fuses, supporting installations up to 600 VAC/DC. Installation often involves using precision terminals with strain relief, such as 0.25 in. female quick connect terminals, to ensure secure and safe electrical connections in industrial control systems.