Authorized ABB Distributor (Low Voltage Drives)
ABB - Low Voltage Drives P14494-62 - Braking Resistor, 63 OHMS, 800 WATTS, GCE2 Enclosure, 12W x 7D x 5H in, 10 lbs

ABB Low Voltage Drives P14494-62 Braking Resistor, 63 OHMS, 800 WATTS, GCE2 Enclosure, 12W x 7D x 5H in, 10 lbs

Alternate Item Number: 3AUA0000064023

UPC: 662348076514


Documents & Media
Technical DrawingSpecification Sheet

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

This ABB Low Voltage Drives Braking Resistor, SKU P14494-62, is designed to dissipate excess energy generated during motor deceleration. Featuring a resistance of 63 OHMS and a power rating of 800 WATTS, this resistor is crucial for applications where dynamic braking is required to bring motors to a rapid and controlled stop. The unit is housed within a GCE2 enclosure, providing robust protection and ensuring operational reliability. Its compact dimensions of 12 inches in width, 7 inches in depth, and 5 inches in height, with a weight of 10 lbs, facilitate straightforward installation in various industrial settings. This resistor is an essential component for enhancing the performance and safety of variable speed drive systems by managing regenerative energy effectively. The UNSPSC code for this product is 39122004. Ensure proper ventilation and adherence to electrical codes during installation. Consult the manufacturer's documentation for specific application guidelines and compatibility with your ABB drive system. This resistor is built to handle the demands of industrial environments, contributing to the longevity and efficiency of your motor control systems.
  • 63 OHM resistance for effective energy dissipation
  • 800 WATTS power rating for demanding applications
  • GCE2 enclosure for robust protection
  • Compact dimensions: 12"W x 7"D x 5"H
  • 10 lbs weight for easy installation
Double plastic fiber optic, Qty 1, 5 meters long

61059113

Double plastic fiber optic, Qty 1, 5 meters long
HMI door mounting kit with 2M cable

181B0399

HMI door mounting kit with 2M cable
CONDUIT MODULE B(LSLV-S100),DFR2-S100

64150005

CONDUIT MODULE B(LSLV-S100),DFR2-S100
FAN POWER SUPPLY BOARD CFV1D.400V/48V

CFW11SP-12387920

FAN POWER SUPPLY BOARD CFV1D.400V/48V
Non motor applications of the DCS800 on inductive loads require a separate active over voltage protection. For simple applications of this type utilizing a 2Q configuration (DCS800-S01-xxxx-05) select this unit for protecting the drive against inadmissible high voltages. The DCF505-1200 is to be used with -0610-05 through -1200-05 units.

DCF505-1200-51

Non motor applications of the DCS800 on inductive loads require a separate active over voltage protection. For simple applications of this type utilizing a 2Q configuration (DCS800-S01-xxxx-05) select this unit for protecting the drive against inadmissible high voltages. The DCF505-1200 is to be used with -0610-05 through -1200-05 units.
Braking Resistor, 500 OHMS, 100 WATTS, CR100 Enclosure, 6W x 1.5D x 0.75H in, 1 lbs

P14494-CR-01

Braking Resistor, 500 OHMS, 100 WATTS, CR100 Enclosure, 6W x 1.5D x 0.75H in, 1 lbs
Braking Resistor, 75 OHMS, 300 WATTS, CR300 Enclosure, 9W x 3D x 1.5H in, 3 lbs

P14494-CR-23

Braking Resistor, 75 OHMS, 300 WATTS, CR300 Enclosure, 9W x 3D x 1.5H in, 3 lbs
Braking Resistor, 2.7 OHMS, 13230 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 73 lbs

P14494-82

Braking Resistor, 2.7 OHMS, 13230 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 73 lbs

Frequently Asked Questions

What is the purpose of a braking resistor with variable frequency drives?

Braking resistors dissipate regenerated power to prevent bus voltage from exceeding the drive's rated limit, increasing braking torque for faster, controlled braking.

What is the purpose of braking choppers (modules)?

Braking modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power and prevent over-voltage trips.

What wire type should be used when connecting directly to resistors in Type ED enclosures?

If installing without optional terminal connections, always use 200ºC rated silicone or Teflon wire when attaching directly to resistors.

What is the function of the thermal switch in Type GCE and ED enclosures?

The normally closed thermal switch detects resistor temperature overloads and is used to alert or shut down the system if the temperature becomes too high.

What is the purpose of the aluminum case in Type CR resistors?

The aluminum case is corrosion-resistant and helps dissipate heat from the resistor element, allowing for efficient cooling.

What is the conduit knockout size for Type GCE enclosures?

The Type GCE enclosures have removable 1/2 inch conduit knockouts for routing standard 90ºC rated wire.

How are Powerohm Type CR resistors constructed?

They feature a nickel-chromium wire helically wound inside a ceramic fixture, placed in a corrosion-resistant aluminum case with high-temperature wire leads.

What is the typical duty cycle for the listed braking resistors?

The duty cycles listed include 3sec on/27sec off, 10sec on/50sec off, 30sec on/180sec off, and 60sec on/180sec off.

What is the maximum continuous current rating for terminal connections in Type ED enclosures?

Type ED enclosures supply terminal connections up to 400 amps continuous.

What are the voltage ratings for ACS250 drives?

ACS250 drives are available for single-phase 100-120V and 200-240V applications, and three-phase 200-240V and 380-480V applications.