
ABB Low Voltage Drives P14494-54 Braking Resistor, 15 OHMS, 5000 WATTS, GCE9 Enclosure, 26.5W x 10D x 5H in, 23 lbs
Alternate Item Number: 3AUA0000041886
UPC: 662348076446
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15 OHM resistance for effective energy dissipation
- 5000 WATTS power rating for demanding applications
- GCE9 enclosure for robust protection
- Compact dimensions: 26.5" W x 10" D x 5" H
- Weight: 23 lbs
Specifications
Size | 26.5W x 10D x 5H in |
Frequently Asked Questions
What is the purpose of a braking resistor with variable frequency drives?
Braking resistors are required for applications needing faster deceleration or when motor speeds exceed the drive's output frequency, dissipating regenerated power to prevent bus voltage from exceeding limits.
What is the purpose of a braking chopper (module)?
Braking modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power, preventing over-voltage trips and improving system performance.
How are Powerohm Type CR resistors constructed?
They feature a nickel-chromium wire helically wound inside a ceramic fixture, housed in a corrosion-resistant aluminum case with high-temperature wire leads encapsulated in ceramic potting material.
What is the function of the thermal switch in Type GCE and ED enclosures?
The normally closed thermal switch detects resistor temperature overloads, providing a safety mechanism to monitor and prevent overheating.
What is the duty cycle for the listed resistor applications?
The duty cycles listed include 3sec on/27sec off, 10sec on/50sec off, 30sec on/180sec off, and 60sec on/180sec off.
What type of wire should be used for installation in Type GCE enclosures?
Standard 90ºC rated wire is used when routed into the compartment through the removable 1/2 inch conduit knockouts and connected to the factory wired terminal block.
When should 200ºC rated wire be used with Type ED enclosures?
Use 200ºC rated silicone or Teflon wire when attaching directly to resistor coils if installing without the optional terminal connections.
What is the voltage range for ACS150 and ACS355 single-phase applications?
These drives are for single-phase 200-240V applications and are designed for stopping duty only.
What is the voltage range for ACS150 and ACS355 three-phase applications?
These drives are for three-phase 200-240V and 380-480V applications and are designed for stopping duty only.
What is the operating voltage for ACS250 single-phase drives?
ACS250 single-phase drives are available for 100-120V and 200-240V applications and are for stopping duty only.






