
ABB Low Voltage Drives P14494-27 Braking Resistor, 45 OHMS, 1920 WATTS, GCE5 Enclosure, 12W x 16D x 5H in, 18 lbs
Alternate Item Number: 3AUA0000015108
UPC: 662348076200
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 45 OHM resistance for effective energy dissipation
- 1920 WATTS power rating for demanding applications
- GCE5 enclosure for robust protection and safety
- Compact dimensions: 12"W x 16"D x 5"H
- 18 lbs weight for manageable installation
Specifications
Size | 12W x 16D x 5H in |

DCF505-0520-51
Non motor applications of the DCS800 on inductive loads require a separate active over voltage protection. For simple applications of this type utilizing a 2Q configuration (DCS800-S01-xxxx-05) select this unit for protecting the drive against inadmissible high voltages. The DCF505-0520 is to be used with -0200-05 through -0520-05 units.
3AFE64554468
DriveAP 1.2 CD. DriveAP is a PC based programming tool for creating, documenting, editing, and downloading Adaptive Programs as well as Multi Block Programming Applications (MBPA). It is a user-friendly tool to modify function blocks and their connections. No special programming skills are required, basic knowledge about block programming is enough.
68363977
This is a protective frame designed to fit over the input terminal connections on the frame R7 ACS800-U4 module drive. This protective cover provides some degree of touch protection for the input terminals.
68341493
This is a protective frame designed to fit over the input terminal connections on the frame R8 ACS800-U4 module drive. This protective cover provides some degree of touch protection for the input terminals.Frequently Asked Questions
What is the purpose of a braking resistor with variable frequency drives?
Braking resistors dissipate regenerated power to prevent bus voltage from exceeding the drive's rated limit, increasing braking torque for faster, controlled braking.
What is the purpose of braking choppers (modules)?
Braking modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power and prevent over-voltage trips.
What wire type should be used when connecting directly to resistors in Type ED enclosures?
If installing without optional terminal connections, always use 200ºC rated silicone or Teflon wire when attaching directly to resistors.
What is the function of the thermal switch in Type GCE and ED enclosures?
The normally closed thermal switch detects resistor temperature overloads and is used to alert or shut down the system if the temperature becomes too high.
What is the conduit knockout size for Type GCE enclosures?
The Type GCE enclosures have removable 1/2 inch conduit knockouts for routing standard 90ºC rated wire.
What is the purpose of the aluminum case in Type CR resistors?
The aluminum case is corrosion-resistant and helps dissipate heat from the resistor element, allowing for efficient cooling.
How are Powerohm Type CR resistors constructed?
They feature a nickel-chromium wire helically wound inside a ceramic fixture, placed in a corrosion-resistant aluminum case with high-temperature wire leads.
What is the typical duty cycle for the listed braking resistors?
The duty cycles listed include 3sec on/27sec off, 10sec on/50sec off, 30sec on/180sec off, and 60sec on/180sec off.
What is the maximum continuous current rating for terminal connections in Type ED enclosures?
Type ED enclosures supply terminal connections up to 400 amps continuous.
What are the voltage ratings for ACS250 drives?
ACS250 drives are available for single-phase 100-120V and 200-240V applications, and three-phase 200-240V and 380-480V applications.

