
ABB Low Voltage Drives P14494-18 Braking Resistor, 150 OHMS, 1200 WATTS, GCE4 Enclosure, 12W x 13D x 5H in, 16 lbs
Alternate Item Number: 3AUA0000015100
UPC: 662348076118
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 150 Ohm resistance for effective braking
- 1200 Watts continuous power dissipation
- Compact dimensions: 12"W x 13"D x 5"H
- Prevents overvoltage during motor deceleration in industrial applications
Specifications
Mounting Type | Stable mounting |
Mounting Type | GCE4 Enclosure |
Series | GCE4 |
Size | 12 x 13 x 5 in |
Size | 12W x 13D x 5H in |
Frequently Asked Questions
What is the purpose of a braking resistor with VFDs?
Braking resistors dissipate regenerated power to prevent bus voltage from exceeding the drive's rated limit, increasing braking torque for faster, controlled braking.
What is the voltage range for ACS150 and ACS355 single-phase applications?
These drives are designed for single-phase 200-240V applications.
What is the voltage range for ACS150 and ACS355 three-phase applications?
These drives are designed for three-phase 200-240V and 380-480V applications.
What is the voltage range for ACS250 single-phase applications?
These drives are designed for single-phase 100-120V and 200-240V applications.
What is the voltage range for ACS250 three-phase applications?
These drives are designed for three-phase 200-240V and 380-480V applications.
What is the voltage range for ACS550 three-phase applications?
These drives are designed for three-phase 200-240V and 380-480V applications.
How are Powerohm Type CR resistors constructed?
They use a nickel-chromium wire helically wound inside a ceramic fixture, housed in an aluminum case. Coil ends are terminated to high-temperature wire leads and encapsulated.
What is the purpose of braking choppers (modules)?
Braking modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power and improve drive system performance.
What wire type should be used when attaching directly to resistors in Type ED enclosures?
If installing without optional terminal connections, always use 200ºC rated silicone or Teflon wire when attaching directly to resistors.
What is the function of the thermal switch in Type GCE and ED enclosures?
The normally closed thermal switch detects resistor temperature overloads, providing a safety mechanism.





