ABB Low Voltage Drives OCAT-01 7 foot CAT 5 patch cable allows remote operation of the standard panel or connection of…
Alternate Item Number: 3AUA0000002388
UPC: 662348075975
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
The ABB OCAT-01 is a 7-foot CAT 5 patch cable designed to facilitate remote operation of standard panels and enable direct connection of ABB Low Voltage Drives to a PC. This essential accessory requires the separately purchased OPCA-01 RJ45/DB9 Adapter for PC connectivity. The OCAT-01 ensures reliable data transmission for critical control and monitoring functions. Its 7-foot length provides ample reach for flexible installation and setup, allowing operators to position control panels or connect diagnostic equipment at a convenient distance from the drive. This cable is specifically engineered to work with ABB's range of Low Voltage Drives, ensuring compatibility and optimal performance. By enabling remote operation, the OCAT-01 enhances operational efficiency and safety, allowing adjustments and monitoring without direct proximity to the drive unit. When paired with the OPCA-01 adapter, it transforms into a powerful tool for drive configuration, troubleshooting, and firmware updates via a personal computer. The CAT 5 standard guarantees sufficient bandwidth for the data exchange required by modern industrial automation systems. Invest in the OCAT-01 for streamlined control and enhanced connectivity within your ABB drive ecosystem.
- 7-foot CAT 5 patch cable for ABB Low Voltage Drives
- Enables remote operation of standard panels
- Facilitates PC connection via OPCA-01 adapter (sold separately)
- Ensures reliable data transmission for control and monitoring
- Designed for compatibility with ABB drive systems
Specifications
Connection Type | RJ45 |
Size | 7 foot |
FENA-11-KIT
The FENA 01 module supports Three protocols Modbus-TCP, EtherNet/IP, and the PROFInet IO RT network. The Modbus-TCP protocol is simply the Modbus protocol used on top of Ethernet-TCP/IP. Modbus-TCP is an open Industrial Ethernet network which has been specified by the Modbus-IDA User Organization. EtherNet/IP is based on the Common Industrial Protocol (CIP), which is also the framework for both the ControlNet and DeviceNet network protocols. PROFInet IO RT is an open network based on the PI Organization standard. The FENA-11 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Both star and bus topology options are supported.
ACS550-DEMOCASE
Powered by 115VAC, the ACS550 DemoCase includes an ACS550 drive mounted on a panel. Included is a motor and I/O board with switches, pots, meters and LEDs permitting remote operation of the drive and motor.
RAIO-01-KIT
The analog I/O extension module offers two unipolar current (0(4) to 20 mA) or bipolar voltage (+/-0(2) to 0 V or +/-0 to 2 V) inputs and two unipolar current (0(4)-20 mA) outputs. Analog unipolar inputs are 12 bit resolution. Bipolar inputs are 11 bit resolution. Analog outputs are 12 bit resolution. The analog inputs and outputs are galvanically isolated as a group, from each other and the power supply.
OPCA-01
This adapter converts the drive’s panel port RJ45 (CAT 5 cable connector) plug to a 9 pin RS-232 computer serial port connector for connecting the ACS550 to a Personal Computer.
ACS/H-CP-EXT-IP66
Allows remote mounting of the ACS-CP-X Operator Panels on a larger NEMA 4X (IP66) enclosure or remote panel. The kit maintains NEMA 4X integrity of the mounting location. All necessary hardware and a mounting template are provided in addition to a 3 m panel cable. When mounted, the operator is not removable from the front of the enclosure. The operator panel must be purchased separately.
DCS800-EP-230VAC-CONVERSION-KIT
The DCS800-EP 230 VAC Conversion Kit will convert a DCS800-EP panel drive to operate from a 3-phase 230VAC nominal line.