Authorized ABB Distributor (Low Voltage Drives)
ABB - Low Voltage Drives JFI-B1 - 2nd environment (C3) EMC filter provides for industrial application RFI noise suppression. This filter is for an unrestricted grounded network and is available for frames A and B (external mount, JFI-A1 & JFI-B1) and C through D (internal mount), the filter is internal and is factory-installed only. CE compliance is dependant on the system & installation.

ABB Low Voltage Drives JFI-B1 2nd environment (C3) EMC filter provides for industrial application RFI noise…

Alternate Item Number: 3AUA0000059728

UPC: 662348075692

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB JFI-B1 (SKU: JFI-B1) is a crucial component for industrial applications requiring robust Radio Frequency Interference (RFI) noise suppression. Designed for unrestricted grounded networks, this 2nd environment (C3) EMC filter effectively mitigates electromagnetic interference (EMI) and RFI, ensuring stable operation of sensitive electronic equipment. The JFI-B1 is specifically engineered for external mounting on ABB drive frames A and B, providing a direct and efficient solution for noise reduction. While CE compliance is dependent on the overall system and installation, the JFI-B1 is built to support these requirements in industrial settings. This filter is integral to maintaining system integrity where variable frequency drives (VFDs) or other electronic controls generate high-frequency noise. Power line noise emissions from VFDs can lead to various disturbances, including dimmer and ballast instability, lighting fluctuations, poor radio reception, control system instability, computer system failures, and flow meter inaccuracies. The JFI-B1, by employing advanced filtering techniques, significantly reduces common mode and differential mode noise in the critical 150 kHz to 30 MHz frequency range. This protection is vital for sensitive equipment such as radios, computers, control devices, radar, and sonar systems. Key features include its suitability for industrial environments (Category C3 according to EN/IEC 61800-3), and its external mounting design for frames A and B. The filter's robust construction and precise engineering contribute to enhanced drive performance and durability. It is manufactured in the US and distributed by ABB Low Voltage Drives. For optimal performance and compliance, it is recommended to consult system-specific installation guidelines. The JFI-B1 is a reliable choice for factories with sophisticated automation, pump stations, and commercial buildings where electromagnetic compatibility is paramount. Its application extends to motor drives, VFDs, and other industrial automation and control systems.
  • 2nd environment (C3) EMC filter for industrial RFI noise suppression
  • Suitable for unrestricted grounded networks
  • External mount design for ABB drive frames A and B (JFI-A1 & JFI-B1)
  • Mitigates EMI and RFI to ensure stable operation of sensitive equipment
  • Supports CE compliance dependent on system and installation
Double plastic fiber optic, Qty 1, 5 meters long

61059113

Double plastic fiber optic, Qty 1, 5 meters long
HMI door mounting kit with 2M cable

181B0399

HMI door mounting kit with 2M cable
CONDUIT MODULE B(LSLV-S100),DFR2-S100

64150005

CONDUIT MODULE B(LSLV-S100),DFR2-S100
FAN POWER SUPPLY BOARD CFV1D.400V/48V

CFW11SP-12387920

FAN POWER SUPPLY BOARD CFV1D.400V/48V
Ethernet PowerLink is a real-time protocol for standard Ethernet. The protocol guarantees transfer of time-critical data in very short cycles with configurable response time.

REPL-02

Ethernet PowerLink is a real-time protocol for standard Ethernet. The protocol guarantees transfer of time-critical data in very short cycles with configurable response time.
The RSCM-01 resolver signal conditioning board can be used in conjunction with RRIA-01 board to double the resolver voltage. Externally mounted.

RSCM-01-KIT

The RSCM-01 resolver signal conditioning board can be used in conjunction with RRIA-01 board to double the resolver voltage. Externally mounted.
The FEPL 02 Ethernet POWERLINK adapter module enables the connection of a drive to an Ethernet POWERLINK network. Ethernet POWERLINK is a communication profile for Real Time Ethernet. The adapter module is classified as a full Ethernet POWERLINK slave.

FEPL-02

The FEPL 02 Ethernet POWERLINK adapter module enables the connection of a drive to an Ethernet POWERLINK network. Ethernet POWERLINK is a communication profile for Real Time Ethernet. The adapter module is classified as a full Ethernet POWERLINK slave.
The FENA 01 module supports Three protocols Modbus-TCP, EtherNet/IP, and the PROFInet IO RT network. The Modbus-TCP protocol is simply the Modbus protocol used on top of Ethernet-TCP/IP. Modbus-TCP is an open Industrial Ethernet network which has been specified by the Modbus-IDA User Organization. EtherNet/IP is based on the Common Industrial Protocol (CIP), which is also the framework for both the ControlNet and DeviceNet network protocols. PROFInet IO RT is an open network based on the PI Organization standard. The FENA-11 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Both star and bus topology options are supported.

FENA-11-KIT

The FENA 01 module supports Three protocols Modbus-TCP, EtherNet/IP, and the PROFInet IO RT network. The Modbus-TCP protocol is simply the Modbus protocol used on top of Ethernet-TCP/IP. Modbus-TCP is an open Industrial Ethernet network which has been specified by the Modbus-IDA User Organization. EtherNet/IP is based on the Common Industrial Protocol (CIP), which is also the framework for both the ControlNet and DeviceNet network protocols. PROFInet IO RT is an open network based on the PI Organization standard. The FENA-11 supports 10/100 Mbps transfer rate with network connections made with CAT 5 wiring and RJ-45 connectors. Both star and bus topology options are supported.