Authorized ABB Distributor (Installation Products)
ABB - Installation Products ULCK 1 - Copper Flood-Seal In-Line Compression Splice Kits, includes Insulating Cover Cap and Rocket, (1) Tin Plated Copper Straight Splice - Standard barrel, wire size #1 Stranded CU, Length 1-7/8 inch, Installing Dies TB, 37. Dimple. No Center Stop. CSA. UL listed. Silicone Grease and Instruction Sheet.

ABB Installation Products ULCK 1 Copper Flood-Seal In-Line Compression Splice Kits, includes Insulating Cover Cap and…

UPC: 783786978465

Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

This ABB Installation Products ULCK 1 Copper Flood-Seal In-Line Compression Splice Kit is designed for reliable electrical connections of #1 stranded copper wire. The kit includes a tin-plated copper straight splice with a standard barrel, measuring 1-7/8 inches in length. Installation is facilitated by the included dimple and requires specific dies: TB and 37. This splice kit features a Flood-Seal design, providing protection against environmental ingress. It comes complete with an insulating cover cap and a rocket tool for secure application. The absence of a center stop simplifies the splicing process. This product is UL and CSA listed, ensuring compliance with safety standards. The kit also contains silicone grease for enhanced conductivity and longevity, along with an instruction sheet for proper installation. Ideal for electrical infrastructure and industrial wiring applications requiring secure, sealed splices.
  • Tin Plated Copper Straight Splice - Standard Barrel
  • Wire Size: #1 Stranded CU
  • Length: 1-7/8 inch
  • Includes Insulating Cover Cap and Rocket
  • UL and CSA Listed

Specifications

Conductor Range
#1 AWG
Connection
Compression
Material
Copper
Number Of Conductors
2
Special Features
Includes one submersible Splice Cover to ensure a fully insulated, watertight repair splice. Flood-Seal® Kits include a rubber insulating cover which fits snugly for maximum heat dissipation. Connectors have a Center Cable Stop to Ensure Equal Cable Insertion
Type
Compression Splice Service Entrance Insulated
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.1000 L
Package Weight (Metric)
0.0450 kg
Long Barrel Two-Way Copper Splice, For Code and Navy Copper Cable, Splice, Silver Plated, Cable Size AWG 1 STR, Navy 75 (37), Length 2-7/8 inch, Diameter 15/32 inch, Green, Die Code 37

271-30630-5

Long Barrel Two-Way Copper Splice, For Code and Navy Copper Cable, Splice, Silver Plated, Cable Size AWG 1 STR, Navy 75 (37), Length 2-7/8 inch, Diameter 15/32 inch, Green, Die Code 37
CU CMP Lug Long 4 AWG 1/4 Bolt-Peep

L350NP

CU CMP Lug Long 4 AWG 1/4 Bolt-Peep
Panduit BSV14X-E Vinyl Insulated Butt Splice

BSV14X-E

Panduit BSV14X-E Vinyl Insulated Butt Splice
Copper Flood-Seal In-Line Compression Splice Kits, conductor size 3/0 Copper, includes Splice, Insulating Cap and Rocket, Silicone Grease.

ULCK 3/0

Copper Flood-Seal In-Line Compression Splice Kits, conductor size 3/0 Copper, includes Splice, Insulating Cap and Rocket, Silicone Grease.
Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Yellow, 1/0 Stranded, 1/0 compact, 1/0 compressed, Conductor B: Red, #2 Stranded, #2 compact, #2 compressed, Aluminum to Copper Conductors.

U102-YR

Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Yellow, 1/0 Stranded, 1/0 compact, 1/0 compressed, Conductor B: Red, #2 Stranded, #2 compact, #2 compressed, Aluminum to Copper Conductors.
Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Yellow, 1/0 Stranded, 1/0 compact, 1/0 compressed, Conductor B: Orange, #4 Stranded, #4 compact, #4 compressed. Aluminum to Copper Conductors.

U104-YO

Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Yellow, 1/0 Stranded, 1/0 compact, 1/0 compressed, Conductor B: Orange, #4 Stranded, #4 compact, #4 compressed. Aluminum to Copper Conductors.
Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Red, #2 Stranded, #2 compact, #4 compressed, Conductor B: Red, #2 Stranded, #2 compact, #2 compressed. Aluminum to Copper Conductors.

U22-RR

Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Red, #2 Stranded, #2 compact, #4 compressed, Conductor B: Red, #2 Stranded, #2 compact, #2 compressed. Aluminum to Copper Conductors.
Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Red, #2 Stranded, #2 compact, #4 compressed, Conductor B: Orange, #4 Stranded, #4 compact, #4 compressed. Aluminum to Copper Conductors.

U24-RO

Insulated Aluminum Service Entrance Compression Splices - U 5/8 inch die series - longer length 3-1/4 inch long, Conductor A: Red, #2 Stranded, #2 compact, #4 compressed, Conductor B: Orange, #4 Stranded, #4 compact, #4 compressed. Aluminum to Copper Conductors.

How to Install the Flood Seal Submersible Splice Cover FSS 20 & FSS 20L

This guide provides instructions for installing the Flood Seal Submersible Splice Cover FSS 20 & FSS 20L, designed to create watertight, insulated splice joints for low voltage cables in direct buried, underground, and overhead applications. Installation must be performed by trained installers following all applicable electrical codes and safety rules.

Estimated time: 30m

Tools needed:

Utility knife, Wire strippers

Supplies needed:

Silicon grease, Electrical connector, Silicone sealant

  1. Select and Cut the Rocket Sleeve and Cap

    Select the correct cut-off ring on the rocket sleeve and cap based on the cable size being used (e.g., #14 to #8, #8 to #4, or #4 to 1/0). Cut off the rocket sleeve and cap at the tip of the arrow, ensuring the correct cable size marking remains visible on the opened rocket and cap.

  2. Prepare Cable Insulation

    Bevel or pencil the cable insulation by 1/4 inch (6mm) to facilitate easier installation of the splice cover.

  3. Apply Grease and Slide Sleeve

    Apply silicon grease to the prepared cable insulation. Carefully slide the cut rocket sleeve and cap over the prepared cable end.

  4. Install the Connector

    Install the appropriate electrical connector onto the prepared cable ends, ensuring a secure and proper connection.

  5. Seal the Splice Housing

    Apply silicone sealant to the open edge of the rocket sleeve. Carefully slide the two halves of the Flood Seal Housing together, centering it precisely over the installed connection to create a watertight seal.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.