Authorized ABB Distributor (Installation Products)
ABB - Installation Products SRG10-20 - Signal Reference Grid Copper Connector for Wire Range 1/0 - 2/0, For Pedestal Posts up to 1 inch square and 1 - 1 1/4 inches Round, Die Code 50

ABB Installation Products SRG10-20 Signal Reference Grid Copper Connector for Wire Range 1/0 - 2/0, For Pedestal Posts up…

UPC: 786210715650

Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB SRG10-20 Signal Reference Grid Copper Connector (SKU: SRG10-20) is a precision-engineered component for secure electrical bonding in industrial and utility grounding systems. Designed by ABB Installation Products, this connector accommodates 1/0 AWG to 2/0 AWG wire ranges and mounts to pedestal posts up to 1 inch square or 1 to 1.25 inches round. The connector features a die code of 50, ensuring compatibility with ABB’s TBM14M and TBM15 hydraulic crimping tools (dies 15527, 15528, 15530) for consistent, high-integrity terminations. Constructed from high-conductivity wrought copper with a plain finish, the SRG10-20 delivers superior electrical conductivity and corrosion resistance for long-term signal integrity. The connector’s hex compression design allows for single or dual crimps, with the first crimp positioned closest to the connector body for optimal pull-out strength. Installation requires a 275 in-lb torque on the provided nut and bolt, securing the connector to the pedestal post before cable termination. Key applications include signal reference grids, grounding systems, and bonding in raised floor pedestals, direct burial, or concrete-embedded installations. The SRG10-20 is specified for use in environments requiring reliable, low-resistance connections, such as data centers, telecom facilities, and industrial power distribution. Its compatibility with standard ABB tooling and adherence to electrical code requirements make it a trusted choice for professionals prioritizing precision and durability in grounding infrastructure. For installation, clean the cable to a bright copper finish before crimping. The die code 50 ensures proper deformation for the 1/0-2/0 AWG range, with embossed die numbers on hex flats for inspection traceability. The connector’s design includes four bolt holes for secure mounting, and all instructions must be followed per national and local electrical codes.
  • Accommodates 1/0 AWG to 2/0 AWG wire ranges
  • Mounts to pedestal posts up to 1" square or 1-1.25" round
  • Die code 50 for ABB TBM14M/TBM15 hydraulic crimping tools
  • High-conductivity wrought copper with plain finish
  • Hex compression design for single or dual crimps

Specifications

Connection Type
Crimp (Die Code 50)
Material
Copper
Mounting Type
Pedestal Post Mounting
Series
SRG
Series
SRG10-20
Size
Wire Range 1/0 - 2/0, Pedestal Posts up to 1 inch square and 1 - 1 1/4 inches Round
Size
Wire Range: 1/0 - 2/0 AWG, Pedestal Posts: up to 1" square and 1 - 1.25" round
Special Features
High-conductivity wrought-copper construction
Standard
UL E3060
Type
Ground Clamp
Package Dimensions (L x W x H)
6 IN x 4 IN x 4 IN
Package Dimensions (L x W x H)
15.24 cm x 10.16 cm x 10.16 cm
Package Weight (Imperial)
0.450 L
Package Weight (Metric)
0.204 kg
#12 x 7 Strand-W CD Ground Pgtl Dog-Pt USA Made Green Zinc

PTS40C

#12 x 7 Strand-W CD Ground Pgtl Dog-Pt USA Made Green Zinc
Heavy-Duty C-Taps, Run 2/2 Tap 4/8, Polished, Copper

DGT1

Heavy-Duty C-Taps, Run 2/2 Tap 4/8, Polished, Copper
E-Z-Ground Ground Grid Copper Compression Connector, Cable Range 4/0 or 250 kcmil, Ground Rod 1/2 and 5/8 Inch, Direct Burial

GG40250-2030

E-Z-Ground Ground Grid Copper Compression Connector, Cable Range 4/0 or 250 kcmil, Ground Rod 1/2 and 5/8 Inch, Direct Burial
1/4" x 2" x 12" Grounding Busbar.

GB2D0008TPI-1

1/4" x 2" x 12" Grounding Busbar.
Grounding pigtail with an insulated lead and a GSH grounding screw on one end. It is designed to make grounding an electrical circuit fast and easy. The lead is 9 inches long and uses 10 AWG wire.

80024

Grounding pigtail with an insulated lead and a GSH grounding screw on one end. It is designed to make grounding an electrical circuit fast and easy. The lead is 9 inches long and uses 10 AWG wire.
Compression Grounding Plate - Grid to Plate Connector - Copper Cable 1/0 - 2/0, Connector with Four 3/8 - 16 UNC Threaded Blind Hole on 1 inch Centers. Supplied with Easy to Locate Protective Label Covering Bolt Holes and Face Plate. Install with Die 15534 (Code 66) in TBM15PF Tool. For Direct Burial. 4-Hole Pad 2-5/16 x 2-1/8 x 5/16 inch Thick. Pad bend 90 Degrees.

52090

Compression Grounding Plate - Grid to Plate Connector - Copper Cable 1/0 - 2/0, Connector with Four 3/8 - 16 UNC Threaded Blind Hole on 1 inch Centers. Supplied with Easy to Locate Protective Label Covering Bolt Holes and Face Plate. Install with Die 15534 (Code 66) in TBM15PF Tool. For Direct Burial. 4-Hole Pad 2-5/16 x 2-1/8 x 5/16 inch Thick. Pad bend 90 Degrees.
Compression Grounding Plate - Grid to Plate Connector - Copper Cable 4/0 - 250 kcmil, Connector with Four 3/8 - 16 UNC Threaded Blind Hole on 1 inch Centers. Supplied with Easy to Locate Protective Label Covering Bolt Holes and Face Plate. Install with Die 15506 (Code 87H) in TBM15PF Tool. For Direct Burial.

52092

Compression Grounding Plate - Grid to Plate Connector - Copper Cable 4/0 - 250 kcmil, Connector with Four 3/8 - 16 UNC Threaded Blind Hole on 1 inch Centers. Supplied with Easy to Locate Protective Label Covering Bolt Holes and Face Plate. Install with Die 15506 (Code 87H) in TBM15PF Tool. For Direct Burial.
Compression Grounding Plate - Grid to Plate Connector - Copper Cable 4/0 - 250 kcmil, Connector with Four 1/2 - 13 UNC Threaded Blind Hole on 1-3/4 inch Centers. Supplied with Easy to Locate Protective Label Covering Bolt Holes and Face Plate. Install with Die 15506 (Code 87H) in TBM15PF Tool. For Direct Burial. 4-Hole Pad 3-1/8 x 2-7/8 x 5/16 inch Thick. Pad bend 90 Degrees. Overall Length 4-1/8 inch

52096

Compression Grounding Plate - Grid to Plate Connector - Copper Cable 4/0 - 250 kcmil, Connector with Four 1/2 - 13 UNC Threaded Blind Hole on 1-3/4 inch Centers. Supplied with Easy to Locate Protective Label Covering Bolt Holes and Face Plate. Install with Die 15506 (Code 87H) in TBM15PF Tool. For Direct Burial. 4-Hole Pad 3-1/8 x 2-7/8 x 5/16 inch Thick. Pad bend 90 Degrees. Overall Length 4-1/8 inch

How to Install the SRG10-20 Connector

This guide provides step-by-step instructions for installing the SRG10-20 connector for a raised floor grounding system.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter, Hydraulic crimping tool

Supplies needed:

Mounting screws, Terminal connectors, Nut, Bolt, Washer, Lock washer

  1. Secure the connector

    Locate and orient the SRG10-20 connector on the pedestal post. Secure it into position by tightening the provided nut and bolt to 275 in-lbs.

  2. Prepare the cable

    Determine the areas along the length of the cable where terminations will be performed. Clean the cable of all visible dirt using a rough cloth or brush and ensure a bright copper finish by wire brushing.

  3. Crimp the connector

    Match the proper die code number for the connector and cable size. Place the cable in the cable bore of the connector, then position the connector's cable bore on one of the die halves of the hydraulic crimping tool. Perform the initial crimp closest to the body of the connector, followed by any additional required crimps.

  4. Inspect the installation

    Verify that the embossed die numbers on the hex flats indicate the correct installing die used. Ensure the connector is secured using all four bolt holes provided.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.