Authorized ABB Distributor (Installation Products)
ABB - Installation Products SMSS 66 KIT - FloodSeal Street Light Connector, Contains Oxide Inhibiting Compound HM 58, Kit Contains One (1) Aluminum Mechanical Splice, #14 - #2, Dual Rated Connector Copper and Aluminum 75 Degree C. Two Screws, One CS-2277 Rocket, One FSS 350 Cap without Liner, One FSS350 Liner, and Instruction Sheet.

ABB Installation Products SMSS 66 KIT FloodSeal Street Light Connector, Contains Oxide Inhibiting Compound HM 58, Kit Contains…

UPC: 783786752812


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB FloodSeal Street Light Connector, SKU SMSS 66 KIT, is engineered for reliable electrical connections in outdoor lighting applications. This comprehensive kit includes one Aluminum Mechanical Splice designed to accommodate wire sizes from #14 to #2 AWG. It is dual-rated for both copper and aluminum conductors, ensuring broad compatibility and flexibility in installation. The connector operates at a maximum temperature of 75 degrees Celsius, suitable for standard street lighting circuits. Included in the kit are two screws for secure fastening, a CS-2277 Rocket connector, and a FSS 350 Cap along with its liner. The FSS 350 Cap is designed without an internal liner, simplifying the connection process. The kit also contains oxide inhibiting compound HM 58, crucial for preventing corrosion and ensuring long-term electrical integrity, especially in environments exposed to moisture and atmospheric contaminants. An instruction sheet is provided to guide users through proper installation. This connector is ideal for splicing street light power cables, offering a durable and efficient solution for maintaining electrical continuity and safety in outdoor infrastructure. The UNSPSC code for this product is 39121421.
  • Dual-rated for copper and aluminum conductors (#14 - #2 AWG)
  • Includes oxide inhibiting compound HM 58 for corrosion prevention
  • 75 Degree C rated for street light applications
  • Kit contains mechanical splice, screws, rocket connector, cap, and liner
  • Designed for reliable outdoor electrical connections

Specifications

Conductor Range
#14 to #2 AL/CU AWG
Connection
Mechanical
Connection Type
Screw Terminal
Finish
Bare
Insulation
EPDM Rubber
Material
Aluminum
Number of Conductors
2
Poles
2P+G
Series
FloodSeal Street Light Connector
Size
#14 - #2
Type
FloodSeal Street Light Connector
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
600 Amp, 15/25kV, 600 Series Deadbreak, Elbow with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Aluminum Compression Lug. Cable Insulation Diameter 0.980 inch to 1.180 inch. Conductor Size kcmil Compressed/Stranded 500 or Compact/Solid 600 or mm2 Compact 250/300.

K655LR-J0330

600 Amp, 15/25kV, 600 Series Deadbreak, Elbow with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Aluminum Compression Lug. Cable Insulation Diameter 0.980 inch to 1.180 inch. Conductor Size kcmil Compressed/Stranded 500 or Compact/Solid 600 or mm2 Compact 250/300.
Single cable clamp 150-300mm2 for power terminal type 5

45000034

Single cable clamp 150-300mm2 for power terminal type 5
Solenoid Valve Connectors, Field Wireable, 3 Pole, Form B 10mm, 250V, 10A, PG9 opening

VBN-029-00

Solenoid Valve Connectors, Field Wireable, 3 Pole, Form B 10mm, 250V, 10A, PG9 opening
Solenoid Valve Connectors, Accessory, Screw, FW Form C

V2,5

Solenoid Valve Connectors, Accessory, Screw, FW Form C
Solenoid Valve Connectors, Accessory, Thumb screw, Cabled Form A, B, ISB, and FW ISC

V-25TB

Solenoid Valve Connectors, Accessory, Thumb screw, Cabled Form A, B, ISB, and FW ISC
Solenoid Valve Connectors, Accessory, Screw, FW ISC

V27

Solenoid Valve Connectors, Accessory, Screw, FW ISC
Solenoid Valve Connectors, Field Wireable, 3 Pole, Form A 18mm, 24V, 10A, LED w/MOV, PG11 opening

VAG-021-00

Solenoid Valve Connectors, Field Wireable, 3 Pole, Form A 18mm, 24V, 10A, LED w/MOV, PG11 opening
Solenoid Valve Connectors, Field Wireable, 3 Pole, Form A 18mm, 24V, 10A, LED w/MOV, .5-NPT opening

VAG-022-00

Solenoid Valve Connectors, Field Wireable, 3 Pole, Form A 18mm, 24V, 10A, LED w/MOV, .5-NPT opening

Frequently Asked Questions

What wire sizes does the SMSS 66 KIT connector accommodate?

The ABB FloodSeal Street Light Connector SMSS 66 KIT is designed to accommodate wire sizes ranging from #14 to #2 AWG.

Is this connector suitable for both copper and aluminum wires?

Yes, the SMSS 66 KIT is dual-rated, meaning it can be used with both copper and aluminum conductors.

What is the maximum operating temperature for this connector?

The ABB FloodSeal Street Light Connector SMSS 66 KIT is rated for a maximum operating temperature of 75 degrees Celsius.

What is included in the SMSS 66 KIT?

The kit contains one aluminum mechanical splice, oxide inhibiting compound HM 58, two screws, a CS-2277 Rocket connector, a FSS 350 Cap without liner, a FSS 350 Liner, and an instruction sheet.

Why is oxide inhibiting compound included?

The oxide inhibiting compound HM 58 is included to prevent corrosion and ensure long-term electrical integrity of the connection, especially in outdoor environments.

How to Install the Flood-Seal Insulated Mechanical Splice (UH 11 & UH 11 L)

This guide provides step-by-step instructions for installing the Flood-Seal Insulated Mechanical Splice (UH 11 & UH 11 L), ensuring proper conductor preparation and secure connections for direct buried applications.

Estimated time: 30m

Tools needed:

Wire strippers, Wire brush, Torque wrench

Supplies needed:

Electrical cable, Oxide inhibiting compound, Silicone grease, Flood-Seal Mechanical Splice (UH 11/UH 11 L)

  1. Select Cut-Off Ring

    Select the correct cut-off ring on the rocket sleeve that corresponds to the cable size being used.

  2. Prepare Cable Conductors

    Strip 1-7/8 inches of insulation from the cable ends, exposing the conductor. Thoroughly wire brush the bare conductor with compound to break up oxides.

  3. Assemble Rocket Sleeve

    Apply silicone to the open edge of the rocket sleeve. Slide the two halves of the rocket sleeve together to form a complete unit.

  4. Trim Rocket Sleeve

    Cut off the rocket sleeve at the tip of the arrow, ensuring that the correct cable size marking remains visible on the opened rocket.

  5. Apply Grease and Position Sleeve

    Apply silicone grease to the prepared cable. Carefully slide the trimmed rocket sleeve over the prepared cable end.

  6. Secure Conductors

    Insert the prepared conductors into the outlet barrels of the mechanical connector. Tighten the set screws to a torque of 240 inch-lbs to ensure a secure connection.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.