Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Overview
- Compatible with aluminum and copper conductors (336.4–500 kcmil range)
- Two-hole NEMA pad with 1/2" bolt mounting for secure attachment
- Oxide inhibitor included to prevent corrosion at termination points
- Designed for use with dies 106, 300, 317, 1 5/16, 14A, and 15A
- Barrel length 3-13/32" for reliable conductor insertion and crimping
Specifications
Application | Durable four-hole Lugs designed for general purpose substation and switchyard equipment use |
Connection | Compression |
Finish | Uncoated |
Housing Material | Aluminum |
Housing Material | Aluminium |
Insulation | None |
Mounting | Bolt-on |
Size | 8-3/4 X 1-3/4 inches wide |
Special Features | Entire conductor range installed by three common dies. Lessens your die inventory. Dual-Rated for use with Aluminumand Copper Conductors. Made of Aluminum for high strength and high conductivity. Prefilled with Oxide Inhibitor to Prevent Oxidation and keep out Moisture. Marked with Conductor Sizes and Die References for Easy Identification |
Type | Compression Lug Two Hole |
Wire Size | 397.5 to 400 kcmil , 500 kcmil , 336.4 (30/7) ACSR AWG , 397.5 (18/1) ACSR AWG |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.7400 L |
Package Weight (Metric) | 0.3360 kg |
SAM 400 NTN
Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 336.4(30/7), 397.5(18/1) ACSR, 397.5-400 Stranded kcmil, 500 Compact. Installing dies 106, 300, 317, 1 5/16, 14A, 15A. Length 8-29/64 inch. Pad 1-3/4 inch wide x 3-19/32 inch long x 29/64 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-13/16 inch. Oxide Inhibitor. Green Cap.
IPLMD350-6
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.SAM 600 N
Aluminum Compression Lug, Wire Range 600 kcmil Stranded, 545.6 ACAR (15/7) AL-CU. Installing Dies 1 5/16, 14A, 300, 106, 317, 15A. Length 8-3/8 inch. Pad 1-3/4 inch wide x 3-19/32 inch long x 29/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 3-27/32 inch long. Uses Bolt size 1/2 inch, Oxide Inhibitor. Black Cap.
SASL 4/0 N
Aluminum Two-Hole Lugs - common die series - Stacking lugs, 4/0 Stranded, 250 kcmil Compact, 4/0 ACSR. Installing dies TX, 76, 249, 840-845, 11A. Length 6-1/8 inch. Pad 1-7/32 inch wide x 3 inch long x 19/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 2-1/16 inch long x 29/32 inch outside Diameter. Oxide Inhibitor, Pink Cap. Dual Rated for use with Aluminum and Copper Conductors.
SA 1/0-48
Aluminum Compression One-Hole NEMA Lug - Wire Range 1/0 Stranded - Compressed - ACSR, 2/0 Compact. Installing Dies TU, 52, BG, 243, 5/8, CSA22. Length 3-1/8 inch. Pad 57/64 inch wide x 1-5/16 inch x 7/32 inch thick. (1) 9/16 inch Diameter Hole. Barrel 1-3/8 inch. Oxide Inhibitor. Yellow Cap. For use with 1/2 inch bolts. Dual Rated for Aluminum and Copper ConductorsSA 2/0 N
Aluminum Two-hole Lugs - Straight Lug, Aluminum or Copper Conductors. 2/0 Compressed, 2/0 (6/1) ACSR, 2/0 Stranded, 3/0 Solid, 3/0 Compact. Installing Dies TX, 76, 249, 840, 845, 11A, CSA 24. Length 6 inch. Pad 1-1/4 inch wide x 3-3/8 inch long x 21/64 inch thick. (2) 9/16 inch diameter holes on1-3/4 inch centers. Barrel 2 inch long - filled with Oxide Inhibitor and Gray Capped.SA 3 N
Aluminum Two-Hole Lugs - common die series - straight lugs, Wire Size #2 Stranded - Compressed, #2 and #1 Compact, #1 Solid, installing dies TU, 52, BG, 243, 5/8, CSA 22. Length 5-1/4 inch. Pad 7/8 inch wide x 3-1/4 inch long. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 1-1/2 inch. Dual Rated for Aluminum and Copper ConductorsSA 2/0-48
Aluminum Compression One-Hole NEMA Lug, Aluminum or Copper Conductors. - Wire Range 2/0 Stranded - Compressed, 2/0 (6/1) ACSR, 3/0 Compact - Solid. Installing Dies TX, 76, 249, 840, 845, 11A. Length 3-1/4 inch. Pad 1-1/4 inch wide x 1-3/8 inch x 11/32 inch thick. (1) 9/16 inch Diameter Hole. Barrel 1-23/64 inch. Oxide Inhibitor. Gray Cap. For use with 1/2 inch bolts.Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.