ABB Installation Products PE 1000-68 Aluminum Lug Pulling Eye for 1000 kcmil AL-CU Cable, Installing Dies 161, 302, 319.…
UPC: 783786741298
Documents & Media
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Designed for 1000 kcmil AL-CU cables
- 7-1/2 inch length with 3-3/4 inch barrel diameter
- Pad dimensions: 2-39/64" W x 2-1/2" L x 39/64" T
- Single 13/16" diameter hole for secure attachment
- Compatible with installing dies 161, 302, and 319
Specifications
Connection | Compression |
Connection Type | Lug Pulling Eye |
Finish | Uncoated |
Housing Material | Aluminum |
Housing Material | Aluminium |
Insulation | None |
Material | Aluminum |
Series | PE 1000-68 |
Size | Length 7.500 inch. Pad 1.843 inch Wide |
Size | 1000 kcmil AL-CU Cable |
Special Features | Marked with Conductor Size and Die Reference |
Type | Compression Lug One Hole |
Wire Size | 1000 kcmil |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.1000 L |
Package Weight (Metric) | 0.4990 kg |
AL 1000 NMSNP
Aluminum Two-Hole (Slotted 9/32 Radius) NEMA Lugs - straight lug, concentric 1000 kcmil, installing dies 161, 292, 302, 319, 1 3/4. Barrel Outside Diameter 1-27/32 inch, Bore 4-5/8 inch Deep x 1-13/64 inch Diameter, 9-1/2 long, Pad 3-5/8 inch Long x 1-3/4 inch wide x 21/32 inch thick. Oxide Inhibitor. Brown Cap. MS is for Milled Sides. Dual Rated for Aluminum and Copper Conductors
IPLMD350-6
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
PL 500-6538
Tin Plated Copper Compression Lug, 500 kcmil. Installing Die U34RT. Length 6-1/16 inch. Pad 1-9/16 inch wide x 3-1/16 inch long x 7/32 inch thick. (1) 5/8 inch diameter hole and (1) 5/16 inch Radius Slot on 1 inch to 1-3/4 inch Center. Barrel 2-3/16 inch long. Sealed Barrel.PE 4/0-68 SOP
Aluminum Lug Pulling Eye for 4/0 Stranded AL-CU Cable, Installing Dies 96, 321, 655, 1 1/8-1, 13A. Length 6-3/4 Inch with Safety Orange Paint on Barrel. Pad 1-1/3 inch wide x 2-1/2 inch long x 9/16 inch thick. (1) 23/32 inch Diameter hole. Barrel 3 inch long.SASL 1/0-48 TN
Tin-Plated Aluminum Compression One-Hole NEMA Stacking Lug for Aluminum and Copper Conductors- Common Die Series, 1/0 Stranded, 1/0 Compressed, Compact 2/0, ACSR 1/0, Installing Dies CSA 22, BG, 243, 5/8. Length 2 inch. Pad 29/32 inch wide x 1-1/16 inch long x 13/64 inch thick. Hole size 17/32 inch Diameter. Barrel 1-8/16 inch long x 41/64 inch Outside Diameter. Oxide Inhibitor. Yellow Cap.SASL 3/0-48 TN
Tin-Plated Aluminum Compression One-Hole Stacking Lug for Aluminum and Copper Conductors- Common Die Series, 3/0 Stranded - ACSR, 3/0 Compact, Installing Dies TX, 249, 840, CSA 24. Length 3-3/8 inch. Pad 1-11/64 inch wide x 1-3/16 inch long x 23/64 inch thick. (1) 17/32 inch hole. Barrel 1-23/64 inch long x 29/32 inch outside diameter. Oxide Inhibitor. Black Cap. Dual Rated for use with Aluminum and Copper Conductors.
SL 1/0 N
Tin Plated Copper Compression Stacking Lug for Copper Terminations, Two-Hole NEMA Pad, 1/0 Stranded CU, Uses 1/2 inch Bolt. Installing Dies TQ, 42, 12, 1/2. Length 5-11/64 inch. Pad 49/64 inch wide x 2-13/16 inch long x 7/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 1-7/16 inch. CSA. UL listed.Frequently Asked Questions
What are the dimensions of the PE 1000-68 lug?
The lug has a 7-1/2 inch length, 3-3/4 inch barrel diameter, and a pad measuring 2-39/64 inch wide x 2-1/2 inch long x 39/64 inch thick.
What cable size is compatible with this lug?
The PE 1000-68 is designed for 1000 kcmil AL-CU cables.
Which installing dies are compatible with this lug?
The PE 1000-68 is compatible with installing dies 161, 302, and 319.
What hole size does the lug have?
The lug features a single 13/16 inch diameter hole for attachment.
What material is the lug made from?
The lug is made from aluminum, ensuring lightweight durability and electrical conductivity.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.