Authorized ABB Distributor (Installation Products)
ABB - Installation Products LRTR 8 WPEC - EPDM Rubber Insulated Disconnectable Transformer Connector, 8 Outlets, Watertight cable and screw ports, Wire Size #12 - 350 mcm, Stud Size 5/8 inch, Length 11 inches, Factory assembled for Right Hand Applications, but can be field changed to Left Hand. Aluminum Cable stop. Ball Bottom Screws aid in the break-up of aluminum oxides. PEC Option.

ABB Installation Products LRTR 8 WPEC EPDM Rubber Insulated Disconnectable Transformer Connector, 8 Outlets, Watertight cable…

UPC: 783786798483


Documents & Media
Manufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB LRTR 8 WPEC is a disconnectable transformer connector designed for reliable electrical connections. Manufactured by ABB Installation Products, this unit features a durable EPDM rubber insulation for protection against environmental factors. It is equipped with 8 outlets, providing ample connection points for your transformer applications. The connector boasts watertight cable and screw ports, ensuring a secure and protected connection even in challenging conditions. This connector accommodates a wide range of wire sizes, from #12 AWG to 350 kcmil, and features a 5/8 inch stud size. The overall length of the unit is 11 inches. It comes factory assembled for right-hand applications but offers the flexibility of field conversion to left-hand configurations. Key design elements include an aluminum cable stop for secure wire termination and ball bottom screws. These specialized screws are engineered to aid in the break-up of aluminum oxides, promoting consistent conductivity and reducing the risk of connection degradation over time. The LRTR 8 WPEC also includes the PEC Option for enhanced functionality.
  • 8-outlet EPDM rubber disconnectable transformer connector
  • Watertight cable and screw ports for secure connections
  • Accommodates wire sizes #12 AWG to 350 kcmil
  • 5/8 inch stud size and 11 inch length
  • Factory assembled for right-hand, field convertible to left-hand applications

Specifications

Application
Stud Mount Transformer Connector
Conductor Range
#12 to 350 kcmil
Connection
Mechanical
Insulation
EPDM Rubber Coating
Material
Aluminum Connector, EPDM Rubber coating
Number of Conductors
8
Size
11 inches
Special Features
Left Hand or Right Hand Installation Capability. Disconnectable - easy to install or remove and fully insulated with EPDM Rubber. Dual Rated to accept Aluminum or Copper Conductors
Type
Quick-Disconnect Transformer Connector
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
2.0600 L
Package Weight (Metric)
0.9340 kg
Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.

RAB 4 OR

Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.
Aluminum Transformer Connector, Four position/tower, Stud size 1 inch with Insulating Rockets

FTU 1-4 NAWR

Aluminum Transformer Connector, Four position/tower, Stud size 1 inch with Insulating Rockets
Tin-Plated Aluminum Connector, 600 - 750 kcmil, Aluminum and Copper, Bolt size 1/2 inch, Aluminum Bar, 3 Positions, 750 kcmil, Rated less than 1000 volts. 3-3/8 inch wide x 3-11/32 inch long x 1-15/26 inch thick, Two 17/32 inch Diameter Holes on one side and Three 1-3/64 inch Diameter x 1-5/16 inch Deep on other side (Center hole is not in line with other 2 holes).

TA 3-750-531

Tin-Plated Aluminum Connector, 600 - 750 kcmil, Aluminum and Copper, Bolt size 1/2 inch, Aluminum Bar, 3 Positions, 750 kcmil, Rated less than 1000 volts. 3-3/8 inch wide x 3-11/32 inch long x 1-15/26 inch thick, Two 17/32 inch Diameter Holes on one side and Three 1-3/64 inch Diameter x 1-5/16 inch Deep on other side (Center hole is not in line with other 2 holes).
Aluminum Transformer Connector, Bus Spade, NEMA, 500 mcm, 4 position/tower, Stud size 5/8 inch, with Insulating Rockets

FTU 4 NAWR

Aluminum Transformer Connector, Bus Spade, NEMA, 500 mcm, 4 position/tower, Stud size 5/8 inch, with Insulating Rockets
Aluminum Transformer Connector, 1/0 - 1000 kcmil, Aluminum and Copper, Bolt size 1/2 inch, Sixteen Conductor, Three Phase, Bar Keeper, length 13.500 inches

ZBK 8087 C

Aluminum Transformer Connector, 1/0 - 1000 kcmil, Aluminum and Copper, Bolt size 1/2 inch, Sixteen Conductor, Three Phase, Bar Keeper, length 13.500 inches
Service Entrance Pedestal Assembly, Aluminum Bars mounted on Phenolic Base, Electrical Connector, less than 1000 volts, (1) 7-3/4 x 6 inch Board with (1) SEP Bus Bar with (Three 1/0-400 Holes), (1) SEP Bus Bar with (Six 1/2-4/0 Holes) includes Two Stainless Steel 3/8-11 x 1 inch Bolts, Two Stainless Steel Flat 3/8 inch Washers, Two Stainless Steel 3/8 inch Belleville Washers, Four Steel Slotted 1/4-20 x .5 inch Screws Assembled with Loctite (Red). Also includes Tin Plated (2) 3/4-16 x .875 Screws for 1/0-400 Bus Bar and (6) Tin Plated 5/8-16 x .813 inch Screws for 2-4/0 Bus Bar.

SEP 4/0

Service Entrance Pedestal Assembly, Aluminum Bars mounted on Phenolic Base, Electrical Connector, less than 1000 volts, (1) 7-3/4 x 6 inch Board with (1) SEP Bus Bar with (Three 1/0-400 Holes), (1) SEP Bus Bar with (Six 1/2-4/0 Holes) includes Two Stainless Steel 3/8-11 x 1 inch Bolts, Two Stainless Steel Flat 3/8 inch Washers, Two Stainless Steel 3/8 inch Belleville Washers, Four Steel Slotted 1/4-20 x .5 inch Screws Assembled with Loctite (Red). Also includes Tin Plated (2) 3/4-16 x .875 Screws for 1/0-400 Bus Bar and (6) Tin Plated 5/8-16 x .813 inch Screws for 2-4/0 Bus Bar.
Aluminum Insulated Transformer Connector, #6 - 500 kcmil, Aluminum and Copper, Stud size 1 inch , Six Conductor

ZVW 4025-1 SLECC

Aluminum Insulated Transformer Connector, #6 - 500 kcmil, Aluminum and Copper, Stud size 1 inch , Six Conductor
Copper Buss Bar, Electrical Connector, Less than 1000 volts, 0.25 inch Thick x 2.0 inch wide x 12 Foot long. Shipped Flat.

CBB 214-144

Copper Buss Bar, Electrical Connector, Less than 1000 volts, 0.25 inch Thick x 2.0 inch wide x 12 Foot long. Shipped Flat.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.