Authorized ABB Distributor (Installation Products)
ABB - Installation Products J4-2622-15 - 4 Point Junction, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface, two - 200 Amp Bushing Well interface, 15KV

ABB Installation Products J4-2622-15 4 Point Junction, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface…

UPC: 783786433926


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB J4-2622-15 is a 4-point molded multipoint junction designed for medium-voltage electrical distribution systems operating at 15kV. This unit features a versatile interface configuration with one 200 Amp bushing well interface, one 600 Amp bushing interface, and two additional 200 Amp bushing well interfaces, providing flexible integration for power cables and equipment. The fully shielded, fully submersible molded rubber housing ensures reliable performance in subsurface, vault, or padmount applications, including sectionalizing, looping, tapping, and equipment bypass. Constructed with 100% peroxide-cured insulation and conductive EPDM materials, the junction delivers superior dielectric strength and environmental resistance. The housing incorporates 304 stainless steel brackets to prevent rusting and corrosion, ensuring long-term durability in harsh conditions. The unit meets ANSI/IEEE Standard 386 (latest revision) with a 15kV voltage class, 8.3kV maximum phase-to-ground operating voltage, and 95kV BIL impulse withstand (1.2 x 50 microsecond wave). Additional ratings include 34kV AC one-minute withstand, 53kV DC 15-minute withstand, and 11kV AC corona extinction at 3pC sensitivity. The J4-2622-15 supports continuous operation at 600 Amp with 25kA symmetrical momentary and fault close capability for 10 cycles, or 200 Amp continuous with 10kA symmetrical momentary and fault close capability for 10 cycles. The modular design allows for 4-inch or 6.5-inch spacing between interfaces, accommodating space constraints in critical installations. Compatible with Elastimold elbow connectors (both 600A and 200A), this junction is ideal for substations, industrial facilities, and power distribution networks requiring high-capacity, reliable connections. The SKU J4-2622-15 from ABB Installation Products provides a space-saving solution for medium-voltage systems where operational flexibility and circuit separation are essential.
  • 15kV Voltage Class, 8.3kV Max Phase-to-Ground Operating Voltage
  • One 600 Amp Bushing Interface, Three 200 Amp Bushing Well Interfaces
  • Fully Shielded, Fully Submersible Molded Rubber Housing
  • 100% Peroxide-Cured Construction with Conductive EPDM Materials
  • 304 Stainless Steel Brackets for Corrosion Resistance

Specifications

Application
Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass
Connection
Push-In
Connection Type
Bushing Well interface
Current Rating
600 A continuous, 25 kA momentary
Frequency
60 Hz
Material
Molded Rubber, EPDM, Stainless Steel
Material
EPDM-Rubber and Stainless Steel Mounting Brackets
Mounting
No Tilt Mounting Bracket
Mounting Type
Subsurface/Vault/Padmount
Series
J4
Size
Overall Length 23 inches, Width 6-3/4 inches
Size
4-point junction with 4-inch or 6.5-inch spacing
Special Features
4 inch Center Spacing
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Multi-Point Junction - 4 Points
Voltage Rating
15 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
4 Point Junction, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface, 25KV, No Parking Stand

J4-2626-25-N

4 Point Junction, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface, 25KV, No Parking Stand
4 Point Junction, one - 200 Amp Bushing Well interface, two - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, 15KV, with Bracket

J4-2662-15

4 Point Junction, one - 200 Amp Bushing Well interface, two - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, 15KV, with Bracket
4 Point Junction, one - 200 Amp Bushing Well interface, two - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, 25KV, SV - Optional 6-1/2 inch spacing

J4-2662-25-SV

4 Point Junction, one - 200 Amp Bushing Well interface, two - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, 25KV, SV - Optional 6-1/2 inch spacing
4 Point Junction, one - 200 Amp Bushing Well interface, two - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, 25KV, with Bracket

J4-2662-25

4 Point Junction, one - 200 Amp Bushing Well interface, two - 600 Amp Bushing interface, one - 200 Amp Bushing Well interface, 25KV, with Bracket
4 Point Junction, one - 200 Amp Bushing Well interface, three - 600 Amp Bushing interface, 15KV, with Bracket

J4-2666-15

4 Point Junction, one - 200 Amp Bushing Well interface, three - 600 Amp Bushing interface, 15KV, with Bracket
4 Point Junction, one - 200 Amp Bushing Well interface, three - 600 Amp Bushing interface, 25KV

J4-2666-25

4 Point Junction, one - 200 Amp Bushing Well interface, three - 600 Amp Bushing interface, 25KV
4 Point Junction, one - 200 Amp Bushing Well interface, three - 600 Amp Bushing interface, 35KV, TMA - Tilt Mount Adapter, with Bracket

J4-2666-35-TMA

4 Point Junction, one - 200 Amp Bushing Well interface, three - 600 Amp Bushing interface, 35KV, TMA - Tilt Mount Adapter, with Bracket

Frequently Asked Questions

What are the voltage classes for this junction?

The multipoint junctions are available for 15kV, 25kV, and 35kV voltage classes.

What types of connectors are compatible with these junctions?

These junctions provide mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.

How many points can a multipoint junction have?

The multipoint junctions are available with 2, 3, 4, 5, or 6 points.

What are the momentary and fault close ratings for 600 Amp?

For 600 Amp, the momentary and fault close rating is 25kA Symmetrical for 10 cycles.

What is included in a basic junction kit?

Each kit contains a basic molded junction, mounting hardware, lubricant tubes, installation instructions, and a protective cap.

What are the available interface spacing options?

The junctions offer standard 4'' spacing or an optional 6.5'' spacing for interfaces.

What is the impulse withstand for a 25kV class junction?

A 25kV voltage class junction has a 140kV BIL impulse withstand (1.2 x 50 microsecond wave).

What is the maximum operating voltage for a 15kV class junction?

For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV.

What standards do these junctions meet?

The junctions meet ANSI/IEEE Standard 386, Latest Revision.

What applications are these junctions designed for?

ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications, useful for sectionalizing, looping, tapping, and equipment bypass.

How to Install the J4-2622-15 Deadbreak Junction (Universal Mount)

This guide provides step-by-step instructions for installing the J4-2622-15 deadbreak junction using the universal mount method. It covers mounting, assembly, and grounding procedures for sectionalizing, looping, or tapping high-voltage electrical systems.

Estimated time: 1h

Tools needed:

Wrenches (for 3/8" and 1/2" hex nuts/screws), Wire strippers, Multimeter (for de-energization verification)

Supplies needed:

Suitable fasteners (for mounting universal brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (if not all interfaces are used)

  1. De-energize Apparatus and Ensure Safety

    Before beginning installation, ensure all associated apparatus are completely de-energized. Verify the circuit is dead using appropriate testing equipment. This product must only be installed by competent personnel trained in high-voltage electrical safety practices. Failure to follow safety instructions can result in serious injury or death.

  2. Determine Mounting Location and Mark

    Determine the desired location for the junction assembly on a flat surface. Use the base plate as a template, place it on the mounting surface, and mark the four slot locations for the universal brackets.

  3. Attach Initial Universal Brackets

    Securely attach two universal brackets to the marked slot locations on the flat surface using suitable fasteners (not supplied). Ensure they are tightened securely to prevent any movement during operation.

  4. Assemble Remaining Universal Brackets

    Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle. Use the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten all hardware securely.

  5. Assemble Junction to Base Bracket

    Assemble the deadbreak junction to the base bracket assembly and base plate. Use two supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.

  6. Mount Junction Assembly to Universal Brackets

    Attach the assembled deadbreak junction to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all hardware securely.

  7. Ground the Junction Assembly

    Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure the base bracket assembly and the junction’s black conductive jacket are properly grounded.

  8. Prepare Operating Interfaces for Energization

    Before energizing the circuit, remove all protective shipping caps and thoroughly clean the operating interfaces. Lubricate each interface with an ELASTIMOLD approved lubricant. If any operating interfaces are not utilized, install appropriate HV insulated caps on the unused bushings; do not use the protective shipping caps for this function.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.