Contact for Pricing
Overview
- Three 600 Amp Bushing Interfaces
- 25kV Voltage Rating
- 6-1/2 inch Centers
- Right Parking Stand Configuration
- ABB - Installation Products Manufacturer
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | Right Parking Stand |
Size | Overall Length 21.5 inches, Width 6.75 inches |
Special Features | 6-1/2 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 3 Points |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J4-6226-15
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.J3-666-25-SV
3 Point Junction, with three 600 Amp Bushing Interfaces, 25kV, 6-1/2 inch centers. No Tilt Mounting.
J5-26666-15-N
5 Point Junction, with one 200 Amp Bushing Well Interfaces and four 600 Amp Bushing Interfaces, 15kV, No Parking Stand.
J6-622266-15
6 Point Junction, with one 600 Amp Bushing Interfaces, three 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 15kV, No Tilt Mounting.J5-62226-35
5 Point Junction, with one 600 Amp Bushing Interfaces, three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interfaces, 35kV, No Tilt Mounting.J5-X4-6
Stainless Steel Multi-point Junction Bracket, 4 inch Centers. Includes Terminal Lug, External Tooth Lock Washer, Hex Head Cap Screw, Hex Nut, Base Bracket and Shield Plate.Frequently Asked Questions
Where can these multipoint junctions be installed?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They feature a fully shielded and fully submersible molded rubber housing.
What items are included in a standard junction kit?
Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
How should 200 Amp and 600 Amp interfaces be ordered?
When a junction has both 200 Amp and 600 Series interfaces, always start with the 200 Amp side when specifying.
What does the Tilt Mounting Adapter (TMA) do?
The TMA bolts to the standard mounting bracket, providing an adjustable angle of 15, 30, 45, or 60 degrees. Two adapters are required for this option.
What interface spacing options are available?
The junctions offer standard 4'' spacing or an optional 6.5'' spacing for interfaces.
Which industry standard does this product meet?
The multipoint junctions meet ANSI/IEEE Standard 386, Latest Revision.
What are the voltage and current ratings of the junction?
The junction is rated for 15kV, 25kV, or 35kV voltage classes. It supports continuous currents of either 200 Amp or 600 Amp.
What materials are used in the junction's construction?
The junction features a molded rubber housing with 100% peroxide-cured insulation and conductive EPDM materials. Brackets utilize 304 stainless steel for corrosion prevention.
What connectors are compatible with these junctions?
These junctions provide mating for Elastimold Elbow connectors, supporting both 600 Amp and 200 Amp types.
What are the continuous current ratings?
The continuous current ratings are 600 Amp or 200 Amp.
How to Install a Deadbreak Junction with Universal Mount
This guide provides step-by-step instructions for installing a deadbreak junction using the universal mounting method. It covers mounting the junction to a flat surface, assembling the brackets, attaching the junction, and grounding the assembly. Ensure all apparatus are de-energized before installation.
Estimated time: 45m
Tools needed:
Wrenches (for 3/8" and 1/2" hex nuts/screws), Wire strippers
Supplies needed:
Suitable fasteners (for mounting brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (if needed for unused interfaces)
- Prepare Mounting Surface
Determine the desired location for the junction assembly. Using the base plate as a template, place it on the mounting surface and mark all slot locations for drilling or fastener placement.
- Mount Universal Brackets
Attach two universal brackets to the marked locations on the flat surface using suitable fasteners. Tighten them securely to prevent any movement during operation. Then, attach the remaining two universal brackets to the first pair at the desired angle using the supplied 3/8” hex head cap screws, external tooth lock washers, and hex nuts. Tighten securely.
- Assemble Junction to Base Bracket
Assemble the deadbreak junction to the base bracket assembly and base plate. Use the supplied two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten all hardware securely.
- Attach Junction Assembly to Universal Brackets
Attach the entire deadbreak junction assembly to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Tighten securely. Ensure the parking stand is in the upright position.
- Ground the Assembly
Connect a suitable grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure the base bracket assembly and the junction’s black conductive jacket are properly grounded.
- Prepare Operating Interfaces
Remove all protective shipping caps from the operating interfaces and clean them thoroughly. Lubricate each interface with an ELASTIMOLD approved lubricant; do not substitute. If any operating interfaces remain unused, install appropriate HV insulated caps before energizing the circuit.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.