Authorized ABB Distributor (Installation Products)
ABB - Installation Products HSB520-135-4 - Heat-Shrinkable HSB Series Breakout Boots for Cable Range 4/0 - 1000 MCM, Expanded Dia. 5.25, Length 10.02 inch, rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black

ABB Installation Products HSB520-135-4 Heat-Shrinkable HSB Series Breakout Boots for Cable Range 4/0 - 1000 MCM, Expanded Dia.…

UPC: 786210276076


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB HSB520-135-4 Heat-Shrinkable Breakout Boots from the HSB Series are precision-engineered for reliable cable terminations and splices in industrial, commercial, and utility applications. Designed for cables ranging from 4/0 to 1000 MCM, these boots deliver a secure, moisture-resistant seal with a 3:1 shrink ratio, ensuring a tight fit over irregular surfaces. The 5.25-inch expanded diameter and 10.02-inch length accommodate a wide range of cable sizes, while the cross-linked polyolefin material with thermoplastic adhesive liner provides superior insulation and environmental protection. With a temperature range of -55°C to 110°C (-67°F to 230°F), these boots are built to withstand harsh environmental conditions, including direct burial applications. Key features include a thick wall design for enhanced abrasion resistance, a 10-year shelf life (for expanded and recovered dimensions), and compliance with Mil Spec AMS-DTL-23053/15. The adhesive-lined inner wall ensures a watertight seal, protecting against moisture, corrosion, and contaminants. Whether used for insulating splices, terminations, or breakout points, the HSB520-135-4 simplifies installation while delivering long-term performance and safety.
  • 3:1 shrink ratio for secure fit over irregular surfaces
  • Cross-linked polyolefin with thermoplastic adhesive liner for moisture resistance
  • Suitable for wet locations and direct burial applications

Specifications

Color
Black
Length
10.02 in
Length
254.51 mm
Material
Cross-linked polyolefin with thermoplastic adhesive liner
Series
HSB
Shrink Ratio
3:1
Size
5.25 inch expanded diameter, 10.02 inch length
Special Features
Boots for 2-, 3- and 4-way cable breakouts
Thickness
0.13 in
Thickness
3.3 mm
Type
Heavy-Wall Heat Shrinkable Tubing
Voltage Rating
600 V
Package Dimensions (L x W x H)
5.3 IN x 5.3 IN x 1.5 IN
Package Dimensions (L x W x H)
13.462 cm x 13.462 cm x 3.81 cm
Package Weight (Imperial)
5.250 L
Package Weight (Metric)
2.381 kg
Heat-Shrinkable HSB Series Breakout Boots for Cable Range 3/0 - 1000 MCM, Expanded Dia. 3.1, Length 9.45 inch, rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black

HSB265-120-4

Heat-Shrinkable HSB Series Breakout Boots for Cable Range 3/0 - 1000 MCM, Expanded Dia. 3.1, Length 9.45 inch, rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black
The HST3.0-48-2 Thick Wall Heat Shrink features an adhesive lined inner wall that seals and provides excellent protection against moisture. Applications include insulating and protecting wires/cables in outdoor, wet locations. Thick wall for direct burial. Voltage rating: UL 486D Listed for 600 V 90 C continuous use. Shrink ratio: 3:1. Temperature range: -67 F to 230 F (-55 C to 110 C). Cross-linked Polyolefin. 3" (76.2 mm) dia. 48" (1219.2 mm) length. Color Black.F894 2 per package.

HST3.0-48-2

The HST3.0-48-2 Thick Wall Heat Shrink features an adhesive lined inner wall that seals and provides excellent protection against moisture. Applications include insulating and protecting wires/cables in outdoor, wet locations. Thick wall for direct burial. Voltage rating: UL 486D Listed for 600 V 90 C continuous use. Shrink ratio: 3:1. Temperature range: -67 F to 230 F (-55 C to 110 C). Cross-linked Polyolefin. 3" (76.2 mm) dia. 48" (1219.2 mm) length. Color Black.F894 2 per package.
.250 Polyester Spiral Wrap

SRPE-250

.250 Polyester Spiral Wrap
Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 3/16 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

CPO187-S-A

Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 3/16 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined
Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 1/4 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

CPO250-S-A

Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 1/4 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined
Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 1/16 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

CPO125-S-A

Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 1/16 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined
Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 1/2 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

CPO500-S-A

Thin-Wall Heat Shrinkable Tubing, Green/Yellow Striped Cross-Linked Polyolefin, 1/2 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined
Thin-Wall Heat Shrinkable Tubing, Clear Cross-Linked Polyolefin, 2 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

CPO2000-C-A

Thin-Wall Heat Shrinkable Tubing, Clear Cross-Linked Polyolefin, 2 Inch, Shrink Ratio 2:1, Length 4 Feet, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

How to Install the HSB520-135-4 Controller

This guide provides step-by-step instructions for installing and configuring the HSB520-135-4 controller, ensuring proper wiring and setup.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter, Heat gun

Supplies needed:

Mounting screws, Heat shrinkable boots, Terminal connectors

  1. Disconnect power

    Ensure that all power sources are disconnected to avoid the risk of shock during installation.

  2. Mount the controller

    Secure the HSB520-135-4 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.

  3. Connect wiring

    Insert the leads or conductors through the legs of the heat shrinkable boots, then connect them to the appropriate terminals on the controller.

  4. Seal connections

    Slide the heat shrinkable boot over the cable section to be sealed. Use a heat gun to shrink the boot, starting from the center and moving outward until the boot conforms to the cable.

  5. Verify connections

    Use a multimeter to check the continuity of the connections and ensure they are secure and functioning correctly.

  6. Reconnect power

    Once all connections are verified, reconnect the power supply to the controller.

  7. Configure settings

    Follow the manufacturer's instructions to program and configure the controller settings as required for your application.

  8. Calibrate the controller

    Perform any necessary calibration procedures as outlined in the manufacturer's documentation to ensure optimal performance.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.