ABB Installation Products BAT22-6NV2 Battery-Powered Crimping Tool, Intended to Crimp Some Types of Terminals, Splices, Wire…
UPC: 786210079530
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Crimps terminals, splices, wire joints, and Dragon Tooth connectors from 22 AWG to 6 AWG
- 14.4V lithium-ion battery delivers 50% more crimps per charge vs. Ni-MH batteries
- Star Protection Computer Controls™ prevent overloading, over-discharging, and overheating
- Ergonomic soft grips and Crimp-Assist® foot for stability during crimping
- Visual crimp indicators (green/orange/red) confirm proper compression
Specifications
Series | BAT22-6NV2 |
Size | 22-6 AWG |
Type | Crimping Tool |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 5.9600 L |
Package Weight (Metric) | 2.7040 kg |
CT-3001/STINT
Introducing the Panduit BlackFin 3-in-1 in-line Lithium-ion Hydraulic Crimp Tool. Adapters and dies change out quickly and easily thanks to a 355-degree rotating flip-top crimp head. The crimp tool has a force of 6.7 tons and crimps Panduit copper lugs and splices for #8 AWG - 600 kcmil Code, #8 AWG -313 kcmil flex, 10mm2 - 240mm2 Class 2r and 10mm2 - 95mm2 Class 5f and 6f metric, #6 AWG - 350 kcmil aluminum lugs and splices. Copper CTAPF taps up to 4/0 AWG copper CTAP taps up to #2 AWG. Includes CD-3001/ST-DA die adapter for CD-2001 dies, two 3.0 Ah 18V batteries, 230 V battery charger with Interational Type C plug and plastic carrying case. For use with Panduit CD-2001, KC22 and KA22 dies sold separately.
T3100000032-002
Commercial Crimp Tooling, Not Releasable, Not Adjustable, Removable/Interchangeable, DIN, Battery, Die Sets, Hand Crimping Tools
TBM6PCR-LI
6-Ton Lithium-Ion Battery Powered Open Crimp Tool for Crimping #8-600 kcmil Copper, #8-400 kcmil Aluminum Connectors, Dimensions 13.7 inch long x 3.3 inch wide x 10.6 inch High, Includes 18 V Makita Battery. Weight with Battery 8.3 lbs.
CT-2980/L
Dieless 6.2 ton crimping tool, 18V lithium-ion battery powered, 120 VAC charger, Jaw opening: 1.50" (38.1mm), Weight 11.75 lbs (8.3 kg) with battery, Length: 14.75" (374.7mm), Height: 15" (381mm), Width: 3" (76.2mm).CT-2940/L
Die type 15 ton crimping tool, 18V lithium-ion battery powered, 120 VAC charger, Jaw opening: 2" (50.8mm), Weight: 24.35 lbs. (11.0kg) with battery, Length: 22" (558.8mm), Height: 10.75" (273.1mm), Width: 3.75" (95.3mm).
CT-2930/L
Die type 14 ton crimping tool, 18V lithium-ion battery powered, 120 VAC charger, Jaw opening: 1.65" (41.9mm), Weight: 17.90 lbs. (8.1 kg) with battery, Length: 14.5" (368.3mm), Height: 16.5" (419.1mm), Width: 3.25" (82.6mm).CT-2940/LE
Die type 15 ton crimping tool, 18V lithium-ion battery powered, 230 VAC charger: 2" (50.8mm), Weight: 24.35 lbs. (11.0kg) with battery, Length: 22" (558.8mm), Height: 10.75" (273.1mm), Width: 3.75" (95.3mm).
CT-2300/AUS
The Panduit BlackFin Battery Powered Micro-crimping Tool crimps 65 percent faster than a manual crimping tool thanks to an innovative trigger with power sensing technology. The lightweight, ergonomic design requires less hand force, reducing the risk of injury. The 4.7" (120mm) jaw with a force of 1.7 tons crimps a range of #22 10 AWG terminals, #26 10 AWG single wire ferrules, #22 12 AWG twin wire ferrules, and #14 10 AWG copper lugs. Includes battery powered micro-crimping tool, one 10.8 V, 1.5 Ah Li-ion battery, 230V battery charger with AUS Type I plug and molded carrying case. Crimp dies (Panduit CD-525, CD-550, CD-570 and CD-090) sold separately.Frequently Asked Questions
What is the product description for the BAT22-6NV2?
The BAT22-6NV2 is an electromechanical crimping tool.
What is the capacity of the included battery?
The included RAML1 lithium-ion battery has a capacity of 10.8 V/1.5 Ah (16.2 Wh).
Are all compatible die sets UL or CSA listed?
No, some die sets like the Dragon Tooth series and DIE2005/DIE2009 are explicitly noted as not UL or CSA listed.
Is the BAT22-6NV2 crimping tool UL listed?
Yes, the BAT22-6NV2 has an exclusive UL listing when it is used with UL listed die sets.
What type of batteries does the BAT22-6NV2 use?
The tool uses powerful 10.8 V/1.5 Ah lithium-ion batteries, which also feature a charge level indicator.
What is included with the BAT22-6NV2 crimping tool?
The BAT22-6NV2 electromechanical crimping tool includes two lithium-ion batteries, a charger, and a handy carrying case.
Is the BAT22-6NV2 crimping tool UL listed?
Yes, the BAT22-6NV2 has an exclusive UL listing when it is used with UL listed die sets.
What type of batteries does the BAT22-6NV2 use?
The tool uses powerful 10.8 V/1.5 Ah lithium-ion batteries, which also feature a charge level indicator.
What is included with the BAT22-6NV2 crimping tool?
The BAT22-6NV2 electromechanical crimping tool includes two lithium-ion batteries, a charger, and a handy carrying case.
Are all compatible die sets UL or CSA listed?
No, some die sets like the Dragon Tooth series and DIE2005/DIE2009 are explicitly noted as not UL or CSA listed.
How to Set Up and Verify the BAT22-6NV2 Crimping Tool
This guide provides step-by-step instructions for installing the crimping dies and performing a calibration verification on the BAT22-6NV2 battery-powered crimping tool, ensuring safe and accurate operation.
Estimated time: 40m
Tools needed:
Screwdriver, Eye protection, Gage pins
Supplies needed:
BAT22-6NV2 Battery (10.8V Li-ion), Battery Charger (110V or 230V), Appropriate Crimping Die Set
- Charge the Battery
Refer to the instructions supplied with your battery charger (e.g., 52068603 or 52068604) to fully charge the 10.8V Li-ion battery (52068605). Ensure the charger is unplugged from the socket before removing the battery. A full charge takes approximately 40 minutes.
- Inspect the Tool and Wear Eye Protection
Before use, visually inspect the crimping tool and dies for any wear, damage such as cracks, gouges, or chips, and ensure the nest area is free of burrs, dents, or scratches. Always wear eye protection when operating or servicing this tool to prevent serious eye injury from flying debris.
- Install the Crimping Dies
Remove the battery from the tool. Select the proper die set for your crimping operation. Remove the screw, washer, and die mounting pins from the crimping head. Partially extend the ram by momentarily pulling the trigger to access and remove the ram's screw, washer, and pins. Insert one die half into the partially extended ram, install its 13mm pins (if applicable), screw, and washer, tightening snugly. Retract the ram. Insert the remaining die half into the crimping head, install its 18mm pins (if applicable), screw, and washer, tightening snugly. For DIE2001/DIE2500, omit pins and ensure dies align before tightening.
- Verify Tool Calibration
With dies installed, cycle the tool until dies bottom. Using appropriate gage pins, ensure each nest meets the gaging requirements specified in Tables 2-6 of the manual for your die set. Keep fingers clear of the die nest during this procedure. If the tool fails any test, do not attempt repair; contact a Thomas & Betts Service Center.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.