Contact for Pricing
Overview
- 30 Amp circuit breaker with 600VAC/250VDC rating
- Watertight design for harsh industrial environments
- Short circuit interrupt rating up to 10 kA
- Failsafe bi-directional cylinder-lift terminals (top/bottom)
- Mounts on 35mm DIN rail (EN/IEC 60715) with fast clip device
- Supports trip curves B, C, D, K, and Z
- Compatible with auxiliary contacts, bell alarms, and shunt trips
- Dimensions: 85 x 69 x 35mm (2P), 85 x 69 x 70mm (4P)
Specifications
Amperage Rating | 30 Amps |
Application | For use where electrical connections need protection from water and/or dust entrance to the contacts or the wiring compartment |
Material | DuraV |
Number Of Poles | 3 |
Number Of Wires | 4 |
Special Features | Not just "watertight", Waterproof for washdown duty (DurORing Sealing) that eliminates the need for costly "weather boots" or "adapters." |
Type | DuraGard Waterproof Connections |
Voltage Rating | 600 V |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 7.000 L |
Package Weight (Metric) | 3.175 kg |
ISE66
Pre-Insulated Service Entry Sleeves 3-4 Str -6 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.
9P23U0/0437
Plug, Voltage through 600VAC/250VDC, Amerpage 20A, 2 Pole 3 Wire, Bushing Size 0.437 Inches9MT54U4W50B
DuraGard Watertight Safety Interlock with Circuit Breaker, 30 480V, 50 Amp with 50 Amp trip ratingHow to Install the DuraGard Safety Interlock
This guide provides step-by-step instructions for installing and wiring the DuraGard Safety Interlock to ensure safe and reliable operation.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Ohmmeter, Torque Wrench
Supplies needed:
Mounting screws, Terminal connectors, Liquid-tight conduit fitting
- Prepare the installation site
Turn the handle to the 'OFF' position. Remove the cover from the base if attached, and mount the base to a wall or I-beam at a de-energized power drop with the receptacle facing down, using the adjustable mounting feet. Tighten the mounting screws to 20 in. lbs.
- Connect the grounding wire
Attach the ground wire to the grounding hub as per the schematic. Ensure that the same colored/numbered circuits are maintained through each junction, paying special attention to the grounding lead connection.
- Wire the circuit breaker
Loosen the pressure screws on the terminals of the circuit breaker and neutral block if used. Strip the wire ends to 5/8” and insert them into the breaker terminals on the line side. Tighten the screws to the specified torque shown on the breaker.
- Reassemble and test
Ensure the disconnect handle is in the 'OFF' position, then reassemble the cover with screws at a maximum of 20 in. lbs. torque. Perform electrical tests to verify correct phasing and grounding connections using an ohmmeter.
- Finalize installation
Record the catalog number and installation date. Instruct personnel on the operation procedures and ensure all safety warnings are communicated.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.