
ABB Installation Products 755ETP-M0260-DRG 600 Amp, 35kV, Deadbreak, Test and Ground Connector kit, includes Insulated cap…
UPC: 783786462230
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 600 Amp, 35 kV Deadbreak Test and Ground Connector Kit
- Includes insulated cap, reducing tap plug, elbow housing, cable adapter
- Features 0370 style aluminum compression lug
- Accommodates cable insulation diameter from 1.370" to 1.630"
- Compatible with 3/0 AWG Stranded, 4/0 AWG Solid, or 95 mm² Compacted conductors
Specifications
Amperage Rating | 600 A |
Application | 600 Amps, 35kV |
Color | Black |
Conductor Range | 3/0 STR/COMPR AWG , 4/0 SOL/COMPT AWG |
Connection | Compression |
Insulation | EPDM Rubber |
Material | Housing - EPDM-Rubber |
Size | Cable Insulation Diameter 1.370 inch to 1.630 inch |
Special Features | Includes Insulated Cap |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Window-Op Connector |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

376LR-J-5260
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 3/0 /Solid 4/0 /mmSquared 85.01.
656ETP-N0410
600 Series Elbows with IEEE 386 Capacitive Test Points, 600 Amp, 15kV, Window-Op Connector Kit. Cable Insulation Diameter 1.515 inch to 1.780 inch. Aluminum Compression Lug. Conductor Size kcmil Compressed Stranded 1000.
675ETPSP-J2300
900 Amp, 15kV, Loadbreak Elbow Tap Plug, Factory assembled Stud, which is not field removable. Copper Compression Lug. Cable Insulation Diameter 0.980 inch to 1.180 inch. Conductor Size AWG or kcmil, Compressed Stranded 350 /Compacted Solid 400 /mmSquared Compact 185.
K655ETP-M0330-DRG
25kV, 600 Amp Deadbreak, Test and Ground Connector Kit. Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300. With Insulated Cap.
655ETP-L0330
15kV 600 Series Deadbreak Elbow TAP PLUG Connector, Cable Insulation Diameter 1.180 inch to 1.465 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300.
655ETP-J0270
15kV 600 Series Deadbreak Elbow TAP PLUG Connector, Cable Insulation Diameter 0.980 inch to 1.180 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 4/0 /Compacted Solid 250 /mmSquared Compact 125.
K655ETP-L0330
25kV, 600 Amp Deadbreak, Test and Ground Connector Kit. Cable Insulation Diameter 1.180 inch to 1.465 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300.
656ETP-M0380-DRG
600 Series Elbows with IEEE 386 Capacitive Test Points, 600 Amp, 15kV, Test and Ground Connector Kit, Insulated Cap. Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Compression Lug. Conductor Size Compressed Stranded 700/750 kcmil or Compacted Solid 900 kcmil.Frequently Asked Questions
What are the applications of WINDOW-OP connectors?
WINDOW-OP connectors enable direct testing and grounding without cable movement. They are suitable for equipment with viewing windows for a visible internal break.
Is silicone lubricant provided with the kit?
Yes, the kit includes five units of Silicone Lubricant (82-08).
What conductor sizes are compatible with this kit?
The kit is compatible with conductor sizes from 2 AWG to 1250 kcmil.
What connector material types are available?
The available connector material types are Universal Aluminum, Copper, and Bi-metal.
What cable insulation diameter ranges are supported?
The kit supports cable insulation diameters ranging from 0.760 in to 2.120 in.
What components are included in the connector kit?
The kit contains an elbow housing, tap plug, insulated cap, cable size adapter, compression lug, stud, silicone lubricant, and instruction sheets.
Which industry standard does this product meet?
This product meets ANSI/IEEE Standard 386, Latest Revision.
What is the impulse withstand (BIL) rating?
The impulse withstand (BIL) rating is 150kV (1.2 x 50 microsecond wave).
What is the continuous current rating of the kit?
The WINDOW-OP Connector Kit has a continuous current rating of 600 Amps.
What is the maximum operating voltage for this connector?
The maximum phase-to-ground operating voltage is 21.1kV, and the maximum phase-to-phase voltage is 36.6kV.
How to Install the 750/775 ETP Elbow Tap Plug
This guide provides step-by-step instructions for the safe installation and wiring of the 750/775 ETP Elbow Tap Plug, including preparation, assembly, and grounding procedures. Ensure all apparatus is de-energized before starting installation to prevent serious injury or death.
Estimated time: 1h
Tools needed:
Torque wrench, Drive adapter, Wire strippers, Crimping tool
Supplies needed:
750/775 ETP Tap Plug, Lubricant (ELASTIMOLD approved), Double-ended stud (if applicable), Elbow connector, Mating connector, Cable with spade contact, #14AWG copper wire (or equivalent), Grounding connector, Waterproofing material, DR(G), ESA, GLR, or LR (optional)
- Prepare Cable and Install Elbow
Prepare the cable using a spade contact and install the elbow according to the (K)650LR or 750LR installation instructions. Before the first crimp on the spade contact, align it on the cable so the spade lies flat on the apparatus bushing contact. Ensure all apparatus is de-energized before starting installation.
- Prepare Connectors and Lubricate Interfaces
Remove the protective caps from both the elbow connector and the tap plug. Finger tighten the double-ended stud (if applicable) into the tap plug. Clean and then lubricate the entire mating connector interface, elbow connector interfaces, and the tap plug using only the supplied lubricant or an ELASTIMOLD approved lubricant.
- Assemble Elbow and Tap Plug
Assemble the elbow connector onto the mating connector. Then, assemble the tap plug into the elbow connector. Insert the drive adapter into the tap plug and turn it clockwise while pushing the elbow and tap plug towards the mating connector. Continue rotating the drive adapter clockwise with an appropriate tool to a torque of 50-60 ft-lbs. Finally, remove the drive adapter from the tap plug.
- Prepare Grounding Eye Wire
Insert one end of a length of #14AWG copper wire (or equivalent) through the grounding eye of the elbow. Leave sufficient length to allow movement of the elbow if required. Make a small loop and twist tightly, taking care not to damage the grounding eye.
- Connect Cable Shield to Ground
For concentric wire shielded cable, twist the shield wires together. Connect them and the grounding eye wire to a common ground point using an appropriate connector. For metallic tape shielded cable, connect the metallic shield to ground using a jumper of equivalent ampacity to the metallic shield, and connect the elbow connector grounding eye wire to ground. In three-phase installations, tie all grounds from all three phases to a common ground point. If the cable is jacketed, install appropriate waterproofing at the jacket terminus to prevent moisture entry.
- Install Optional Components
Clean and lubricate the entire tap plug interface. Then, install either a DR(G), ESA, GLR, or LR of the appropriate voltage class to the tap plug interface. Follow the specific installation instructions provided with these individual products. Use only the supplied lubricant or an ELASTIMOLD approved lubricant.
- Verify Final Assembly Seating
Confirm the complete assembly of an insulated cap or elbow by ensuring no portion of the black band is visible when viewed from the side. This indicates proper seating.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.