Authorized ABB Distributor (Installation Products)
ABB - Installation Products 750J2-6 - Bracket for Junction, 2 Point, 600 Amp, 35kV, Hardware Pacjage consists of Brackets and Straps Only

ABB Installation Products 750J2-6 Bracket for Junction, 2 Point, 600 Amp, 35kV, Hardware Pacjage consists of Brackets and…

UPC: 075114211574


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 750J2-6 is a specialized bracket designed for junction applications within electrical distribution systems. This component is rated for 600 Amps and operates at voltages up to 35kV, making it suitable for medium-voltage installations. The hardware package for the 750J2-6 specifically includes the necessary brackets and straps required for a secure and reliable two-point junction setup. Manufactured by ABB Installation Products, this bracket ensures proper support and connection integrity for critical electrical infrastructure. Its design focuses on providing a stable mounting solution for junction points, facilitating safe and efficient power distribution. The UNSPSC code for this product is 26121630, categorizing it under electrical hardware and accessories. This bracket is essential for maintaining the structural integrity and electrical continuity of medium-voltage junction points, ensuring operational reliability in power transmission and distribution networks. The package contains only the brackets and straps, allowing for integration with other system components as needed.
  • Designed for 2-point junction applications
  • Rated for 600 Amp current capacity
  • Suitable for 35kV voltage systems
  • Includes brackets and straps hardware package
  • Manufactured by ABB Installation Products

Specifications

Application
35 kV, 600 Amps
Current Rating
600 A
Mounting Type
2 Point
Series
750J
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Bracket
Voltage Rating
35 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
35kv, 200 Amp Loadbreak Bushing Clamp and Gasket Kit - 3 Holes, for use on Bushing Well without Bail Tabs. Equipped with Copper Conductor Rod. Molded Epoxy Flange for Gasketed Clamp Mounting. Includes Epoxy Bushing Well, Clamp, Gasket and Instruction Sheet.

L1601PC-S2-CK3H

35kv, 200 Amp Loadbreak Bushing Clamp and Gasket Kit - 3 Holes, for use on Bushing Well without Bail Tabs. Equipped with Copper Conductor Rod. Molded Epoxy Flange for Gasketed Clamp Mounting. Includes Epoxy Bushing Well, Clamp, Gasket and Instruction Sheet.
15-25-35 Kv Asssmbly Tapered Nose Cone for PCJs. Natural Color. Material HDPE or Delrin. Length 2.75 inch, Outside Diameter .82 inch. Wire Size #2.

450-23-8

15-25-35 Kv Asssmbly Tapered Nose Cone for PCJs. Natural Color. Material HDPE or Delrin. Length 2.75 inch, Outside Diameter .82 inch. Wire Size #2.
35 kV, 900 Amps, 200 kV BIL, Deadbreak Bushing (for In-Oil and SF6 applications), Length 8.12 inch, Diameter 4-1/2 inch. Shank Length 2.938 inch. Molded Epoxy with Stainless Steel Flange. For Cover or Side-Mount Installations.

775S1-200

35 kV, 900 Amps, 200 kV BIL, Deadbreak Bushing (for In-Oil and SF6 applications), Length 8.12 inch, Diameter 4-1/2 inch. Shank Length 2.938 inch. Molded Epoxy with Stainless Steel Flange. For Cover or Side-Mount Installations.
15-25-35 Kv Asssmbly Tapered Nose Cone for PCJs. Natural Color. Material HDPE or Delrin. Length 2.75 inch, Outside Diameter 1.25 inch. Wire Size 350 kcmil.

450-23-1

15-25-35 Kv Asssmbly Tapered Nose Cone for PCJs. Natural Color. Material HDPE or Delrin. Length 2.75 inch, Outside Diameter 1.25 inch. Wire Size 350 kcmil.
35kv, 600 Amp, Short 2-15/16 inch Shank Bushing with out Stud, with standard aluminum conductor rod, includes 5/8-11 threaded hole at elbow end, includes shipping cap, with Notch Flange, With Clamp, Gasket

750S1-NF-CK

35kv, 600 Amp, Short 2-15/16 inch Shank Bushing with out Stud, with standard aluminum conductor rod, includes 5/8-11 threaded hole at elbow end, includes shipping cap, with Notch Flange, With Clamp, Gasket
1 Inch Deep Socket, 1/2 Drive, 12-Point. Length 3 inch. For K671BGAD

600-570

1 Inch Deep Socket, 1/2 Drive, 12-Point. Length 3 inch. For K671BGAD
35kV, 900 Amp, DeadBreak, Insulated Cap, Length 10 inch. Copper Stud, Pulling Eye, EPDM Peroxide Insulation.

776DR

35kV, 900 Amp, DeadBreak, Insulated Cap, Length 10 inch. Copper Stud, Pulling Eye, EPDM Peroxide Insulation.
35kv, 600 Amp, Deadbreak, Threaded Lug and Cable Adapter Kit, Cable Insulation Diameter 0.980 inch to 1.180 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1/0 /Compacted Solid 2/0.

755TCK-J0240

35kv, 600 Amp, Deadbreak, Threaded Lug and Cable Adapter Kit, Cable Insulation Diameter 0.980 inch to 1.180 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1/0 /Compacted Solid 2/0.

Frequently Asked Questions

What are the main specifications of the 750J2 junction?

The 750J2 is a 35kV, 600 Amp Deadbreak 2-Way Junction.

What is the impulse withstand rating of the junction?

The junction has a 150kV BIL impulse withstand rating, based on a 1.2 x 50 microsecond wave.

How do I order the junction with "U" style mounting straps?

Add "-5" to the end of the catalog number for junctions with "U" style mounting straps only.

How do I order the 35kV 600 Amp 2-way Deadbreak Junction?

Specify 750J2 when ordering the 35kV, 600 Amp, 2-way Deadbreak Junction.

What specific ELASTIMOLD products are compatible with the junction?

The junction is designed to mate with ELASTIMOLD products like the 755 Elbow Connector, 755BE Bushing Extender, and 755BEA2 Bushing Adapter.

What items are included in the 750J2 kit?

Each 750J2 kit includes one basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and two protective caps.

How is the ELASTIMOLD junction mounted?

ELASTIMOLD junctions come with a stainless steel mounting bracket and back plate, suitable for mounting on a flat surface.

What is the corona extinction voltage for the junction?

The corona extinction voltage for the junction is 26kV AC at 3pC sensitivity.

What is the continuous current rating of the junction?

The continuous current rating for the junction is 600 Amp.

What is the maximum phase-to-phase voltage rating?

The maximum phase-to-phase voltage rating for the junction is 36.6kV.

How to Install the LINK-C Deadbreak Cam Link Operable Connector System

This guide provides step-by-step instructions for the safe installation and initial setup of the LINK-C 600 amp deadbreak cam link operable connector system. Ensure all apparatus is de-energized before beginning installation.

Estimated time: 1h 30m

Tools needed:

Suitable tool for 1-inch hex (e.g., socket wrench), Torque wrench, Hot stick, Wire strippers, 600ATM Operating Tool, 600AMT Operating Tool

Supplies needed:

ELASTIMOLD supplied lubricant, #14 AWG or #12 AWG solid copper wire, Appropriate grounding connector, Mounting hardware for alignment bracket (hex bolts, lock washers)

  1. Prepare the Cable and Elbow

    WARNING: All apparatus must be de-energized during installation. Install the 600 amp elbow onto the cable according to the installation instructions supplied with the elbow, ensuring it will align with the stand-off plug.

  2. Clean and Lubricate Interfaces

    Thoroughly clean and lubricate the apparatus bushing, both interfaces of the 600 amp bushing extender, and both interfaces of the 600 amp elbow with ELASTIMOLD supplied lubricant. IMPORTANT: Bushing extender and elbow interfaces must be thoroughly lubricated to allow for proper removal of the link.

  3. Install Bushing Extender

    Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact and engage the internal hex broach. Insert the retainer contact into the bushing extender and thread it into the apparatus bushing using a suitable tool applied to the 1-inch hex portion of the 600ATM. Torque to 50-60 ft-lbs.

  4. Install Elbow onto Standoff Plug

    Install the 600 amp elbow onto the epoxy standoff plug. Insert the 600AMT into the retainer contact and engage the internal hex broach. Insert the retainer contact into the 600 amp elbow through the hole in the compression lug and thread it into the epoxy standoff plug using a suitable tool applied to the 1-inch hex portion of the 600AMT. Torque to 50-60 ft-lbs.

  5. Install Alignment Bracket

    Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender to a dimension of 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket with the supplied hardware and torque by alternating sides until the clamp tabs are flush with each other and tight on both sides.

  6. Secure Elbow in Alignment Bracket

    Position the elbow in the alignment bracket such that the elbow cuff is lined up evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket with the supplied hardware and torque by alternating sides until the clamp tabs are flush with each other and tight on both sides. Ensure the elbow clamp notch faces the cable entrance of the elbow.

  7. Install the Link

    Clean and lubricate both 600 ampere interfaces of the Link with ELASTIMOLD supplied lubricant. Align the Link such that when inserted into the bushing extender and elbow, it is perpendicular to the switch faceplate. Insert the Link into the bushing extender and elbow, ensuring both lever arms are on the inside of the alignment bracket legs. Engage the pivot pin into the slots in the alignment bracket legs. While pushing inward, move the lever arms downward by use of the hot stick eye, thus engaging the roller pin and moving the Link inward. Continue moving lever arms until perpendicular to the alignment bracket leg.

  8. Ground the System

    Ground the elbow by feeding a #14 AWG or #12 AWG solid copper wire through the grounding eye on the elbow, twisting it tight, and connecting it to ground. Clean and lubricate the 200 amp interface on the Link. Ground, then install the desired mating product on the 200 amp interface per its installation instructions. Ground the cable: if concentric neutral cable is used, twist the concentric neutral wires together and connect to ground; if 20MA or 21MA grounding devices are used, connect the ground lead from the device to ground. For three-phase installations, tie all grounds from all three phases to a common ground point.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.