Authorized ABB Distributor (Installation Products)
ABB - Installation Products 600ECSG3-24 - 600 ECS Cold Shrinkable Seal with Copper Braid and Constant Spring Force - Shield Adapter Kit, 24 Inch Long, includes (1) Cold Shrink Tube, Conductive Copper Tape, Flat Copper Braid, Spring Coil, Mastic, Instruction Sheet.

ABB Installation Products 600ECSG3-24 600 ECS Cold Shrinkable Seal with Copper Braid and Constant Spring Force - Shield…

UPC: 783786078882


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 600ECSG3-24 Cold Shrinkable Seal with Copper Braid and Constant Spring Force is a shield adapter kit engineered for jacketed copper tape shield cables. This 24-inch long kit provides a field-proven solution for resealing cable jackets at elbows or termination points, preventing moisture ingress and maintaining electrical continuity in medium voltage applications. The core component is a cold shrink tube made from retained-memory EPDM rubber, which expands and contracts with thermal cycling while delivering a minimum O.D. of 1.28 inches (32.51 mm) and maximum O.D. of 2.30 inches (58.42 mm) to accommodate cable diameters within this range. Installation requires no heat, making it suitable for environments where open flames are prohibited or sensitive cable types are present. The kit includes conductive copper tape and flat copper braid (equivalent to #10 AWG conductor) for effective grounding and EMI shielding, ensuring signal integrity in industrial electrical systems. A spring coil provides constant spring force for sustained pressure against the cable and termination, compensating for thermal expansion and contraction. Additional sealing is achieved with mastic strips (butyl auto tape) for environmental protection. The product operates reliably across a temperature range of -40°C to 65°C (-40°F to 149°F) and is designed for both indoor and outdoor applications. Each kit contains one cold shrink tube, conductive copper tape, flat copper braid, spring coil, three mastic strips, and an instruction sheet. The 600 ECS series from ABB Installation Products is optimized for medium voltage cables with copper tape shields, offering a rugged, resilient alternative to tape or heat-shrinkable products.
  • Cold shrink tube O.D. range: 1.28" (32.51 mm) min to 2.30" (58.42 mm) max
  • Includes conductive copper tape, flat copper braid (#10 AWG equivalent), spring coil, and three mastic strips
  • Operating temperature range: -40°C to 65°C (-40°F to 149°F)
  • No heat required for installation; suitable for flame-sensitive environments
  • Designed for medium voltage cables with copper tape shields at elbows or termination points

Specifications

Application
Used for medium voltage cables with copper tape shield
Material
EPDM Rubber, Copper, Butyl
Series
600 ECS
Size
24 inch long
Size
Length: 24 Inch, Min O.D.: 1.28 Inches (32.51 mm), Max O.D.: 2.30 Inches (58.42 mm)
Special Features
24 inch Long
Temperature Rating
-40 to +65 C
Type
Shield Adapter Kit
Package Dimensions (L x W x H)
1 IN x 1 IN x 1 IN
Package Dimensions (L x W x H)
2.54 cm x 2.54 cm x 2.54 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Sta-Kon Terminal and Splice Organizer Kit contains 6 see-through nylon canisters containing (20) 10RC-10, 10RC-10F, (25) 14RB-10, 2RB14X, 14RB-10F, (15) 2RC-10X

STA-ORG

Sta-Kon Terminal and Splice Organizer Kit contains 6 see-through nylon canisters containing (20) 10RC-10, 10RC-10F, (25) 14RB-10, 2RB14X, 14RB-10F, (15) 2RC-10X
A-Series™ Panelboards. Pro-Stock, Unassembled Lighting Panels. Main Lug Kits. Standard. Lug Type: Pressure. All lugs are suitable for interiors with either copper or aluminum bus.

MLA1

A-Series™ Panelboards. Pro-Stock, Unassembled Lighting Panels. Main Lug Kits. Standard. Lug Type: Pressure. All lugs are suitable for interiors with either copper or aluminum bus.
Compressor Terminal Kit (3 Color Coded Wires, 3 12-10 Shrink Butt Connectors)

NSI33-12

Compressor Terminal Kit (3 Color Coded Wires, 3 12-10 Shrink Butt Connectors)
Jacket Seal, Includes 600ECS Assembly, Jacketing Tape, Braided Ground Strap (Welded), Copper Foil Tape-Cut, Coil Spring, Butyl Auto Tape, Instruction Sheet.

600ECSG3-30PCJ

Jacket Seal, Includes 600ECS Assembly, Jacketing Tape, Braided Ground Strap (Welded), Copper Foil Tape-Cut, Coil Spring, Butyl Auto Tape, Instruction Sheet.
Jacket Seal, Includes 200ECS Assembly, Jacketing Tape, Braided Ground Strap (Welded), Copper Foil Tape-Cut, Coil Spring, Butyl Auto Tape, Instruction Sheet.

200ECSG3-30PCJ

Jacket Seal, Includes 200ECS Assembly, Jacketing Tape, Braided Ground Strap (Welded), Copper Foil Tape-Cut, Coil Spring, Butyl Auto Tape, Instruction Sheet.
Power Cable Seal Kit, Cold Shrinkable Jacket Seal, One inch longer than standard product length of 7 inches

200ECS-L

Power Cable Seal Kit, Cold Shrinkable Jacket Seal, One inch longer than standard product length of 7 inches
Elbow Jacket Sealing Kit Extra Length, 9 inch Long x 2.9 inch Diameter

600ECS-L

Elbow Jacket Sealing Kit Extra Length, 9 inch Long x 2.9 inch Diameter
600 Amp Cold Shrinkable Seal with Grounding Kit-corrugated Shield

600ECS-G4

600 Amp Cold Shrinkable Seal with Grounding Kit-corrugated Shield

Frequently Asked Questions

How do I order the Cold Shrinkable Seal?

To order the Cold Shrinkable Seal with Copper Braid & Constant Spring Force, specify the product code 600ECS-G3.

What items are included in each 600ECS-G3 kit?

Each 600ECS-G3 kit includes one Cold Shrink Tube, one Conductive Copper Tape, one Flat Copper Braid, one Spring Coil, three Mastic (Butyl Auto Tape), and one Instruction Sheet.

What type of cables is the 600ECS-G3 used with?

The 600ECS-G3 is used for medium voltage cables that have a copper tape shield.

What is the operating temperature range for the 600ECS-G3?

The 600ECS-G3 operates within a temperature range of -40° Celsius (-40° Fahrenheit) to 65° Celsius (149° Fahrenheit).

What is the jacket seal O.D. range for the 600ECS-G3?

The 600ECS-G3 jacket seal O.D. has a minimum of 1.28 inches and a maximum of 2.30 inches.

Can the 600ECS-G3 be used indoors and outdoors?

Yes, the 600ECS-G3 is suitable for both indoor and outdoor applications due to its chemical, ultraviolet, and ozone resistance.

What are the applications for the 600ECS-G3 kit?

The 600ECS-G3 kits are designed for resealing jackets on jacketed copper tape shield cables during elbow or other terminating accessory installations.

What are the applications for the 600ECS-G3 kit?

The 600ECS-G3 kits are designed for resealing jackets on jacketed copper tape shield cables during elbow or other terminating accessory installations.

How do I order the Cold Shrinkable Seal?

To order the Cold Shrinkable Seal with Copper Braid & Constant Spring Force, specify the product code 600ECS-G3.

What items are included in each 600ECS-G3 kit?

Each 600ECS-G3 kit includes one Cold Shrink Tube, one Conductive Copper Tape, one Flat Copper Braid, one Spring Coil, three Mastic (Butyl Auto Tape), and one Instruction Sheet.

How to Install the 600 ECS-G3 Cable Grounding and Sealing Kit

This guide provides step-by-step instructions for installing the 600 ECS-G3 Jacketed Cable Grounding and Sealing Kit. Ensure all apparatus are de-energized and follow high voltage safety practices throughout the installation process.

Estimated time: 1h

Tools needed:

Cable stripping tool, Cleaning cloth, Wire cutters

Supplies needed:

Cold Shrink Tube, Mastic, Flat Copper Braid (#10 AWG equivalent), Conductive Copper Tape, Spring Coil, Vinyl Tape, Suitable grounding connector, #14 AWG Copper Wire

  1. Prepare the Cable Surface

    Wipe the outer jacket clean for a distance of 30 inches (750mm). Slide the cold shrink tube (loose end first) onto the cable for a distance of 18 inches (458mm).

  2. Remove Cable Layers

    Remove the outer jacket for a distance of 4 inches (102mm) beyond the semi-con shield skive dimension recommended by the product manufacturer. Remove the copper tape shield for a distance of 1.5 inches (38mm) from the end of the semi-con shield.

  3. Secure Copper Tape and Apply Mastic

    Wrap conductive copper tape around the edge to keep the copper tape shield in place. Install the desired product (e.g., connector) per its manufacturer’s instructions. Apply one wrap of mastic.

  4. Install Braided Copper Wire and Spring Coil

    Slightly flare the end of the flat copper braid with the solder block and place it on the copper shield, flush against the cable jacket. Wrap the spring coil around the braid and cable for two complete turns. Bend the braid back over the spring and wrap the remainder of the spring coil around the braid and cable, finger tightening it. Secure the end of the spring coil with a short piece of copper tape. Ensure the solder block of the braid is centered on top of the mastic tape.

  5. Apply Mastic and Vinyl Tape

    Apply mastic over the braid. Overwrap the mastic with two half-lapped layers of vinyl tape. Wrap a third piece of mastic around the cable entrance of the connector being used. Overwrap this mastic with two half-lapped layers of vinyl tape.

  6. Position and Shrink Cold Shrink Tube

    Pull the loose end of the cold shrink tube from the back and unwind the cord in a clockwise direction until the plastic core is flush with the end of the cold shrink tube. Slide the cold shrink tube into its final position and continue to unwind the cord in a clockwise direction until the tube fully collapses. Ensure the tube overlaps the elbow or joint end by at least 1 inch (25mm) for a proper seal, or overlaps the adapter and butts against the accompanying housing if cable adapters are used.

  7. Ground the Assembly

    Using a suitable connector (not supplied) and #14 AWG copper wire, ground the assembly in accordance with standard utility practices.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.