Authorized ABB Distributor (Installation Products)
ABB - Installation Products 54930BE - Copper One-Hole Lug, Long Barrel, Blind End, Max 35KV, Wire Size 8 AWG, 1/4 Inch Bolt Size, Tin Plated, Die Code 21, Die Color Code Red
More images

ABB Installation Products 54930BE Copper One-Hole Lug, Long Barrel, Blind End, Max 35KV, Wire Size 8 AWG, 1/4 Inch Bolt…

UPC: 786210898254


Documents & Media
Installation InstructionsSpecification SheetVideo ClipManufacturer Product Website

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 54930BE Copper One-Hole Lug is a UL486A and UL467 listed electrical connector designed for high-voltage applications up to 35kV. Constructed from high-conductivity copper tubing and tin-plated for corrosion resistance, this lug ensures low contact resistance and long-term reliability in demanding industrial environments. The long barrel design maximizes crimp points, providing superior wire pull-out strength and mechanical integrity. The blind end design prevents corrosive contaminants from entering the barrel, making it ideal for harsh or outdoor installations. The 1/4-inch bolt size ensures compatibility with standard hardware, while the red die color code (Die Code 21) simplifies inventory management and crimp tool selection. Certified by CSA and tested to Telcordia NEBS Level 3 standards, the 54930BE is American Bureau of Shipping approved and rated for 90°C continuous operation. For applications exceeding 2000V, consult the cable manufacturer's voltage stress relief instructions. This lug is optimized for stranded copper conductors ranging from 8 AWG to 10 AWG, with a wire strip length of 0.81 inches. Trust ABB Installation Products for a certified, high-performance connection solution in power distribution, substations, and industrial machinery.
  • UL486A and UL467 listed for wire connectors and grounding applications
  • Tin-plated copper construction for corrosion resistance and low contact resistance
  • Long barrel design for maximum crimp points and superior wire pull-out strength
  • Blind end prevents corrosive contaminants from entering the barrel
  • Red die color code (Die Code 21) for easy identification and tool compatibility

Specifications

Cable Size
8 AWG
Color
Red
Connection Type
One-Hole Lug
Insulation
None
Insulation
False
Material
Copper
Material
Copper, Tin Plated
Mounting Type
Blind End
Number Of Holes
1
Series
54930BE
Size
8 AWG, 1/4 Inch Bolt
Standard
UL E9809
Standard
UL E9809 / UL E9809
Stud Size
1/4 in
Type
Long Barrel
Voltage Rating
35 kV
Package Dimensions (L x W x H)
3.3 IN x 2.8 IN x 2.3 IN
Package Dimensions (L x W x H)
8.382 cm x 7.112 cm x 5.842 cm
Package Weight (Imperial)
0.020 L
Package Weight (Metric)
0.009 kg
15 Ton Hex Die, 125H, Stainless Steel

15603SS

15 Ton Hex Die, 125H, Stainless Steel
HYD POWER TOOL FOR CRIMPING RD-RM

13642M

HYD POWER TOOL FOR CRIMPING RD-RM
Die for 12 Ton 13400 or 13642M Hydrualic Tool for Crimping 210214MT Dragon Tooth Terminals

13681

Die for 12 Ton 13400 or 13642M Hydrualic Tool for Crimping 210214MT Dragon Tooth Terminals
Hand Tool (Plier-Type) for Installing A, B, C, PT Non-insulated Terminals and Splices, Includes Plier Grip and Wire Cutter

WT161M

Hand Tool (Plier-Type) for Installing A, B, C, PT Non-insulated Terminals and Splices, Includes Plier Grip and Wire Cutter
Non-Insulated Parallel Splice Connector For Wire Range #4 AWG, Circular Mil Range 33,100-52,600, Length 0.531 Diameter 0.41, Nickel Plated

F4-PS-W-NP

Non-Insulated Parallel Splice Connector For Wire Range #4 AWG, Circular Mil Range 33,100-52,600, Length 0.531 Diameter 0.41, Nickel Plated
Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

AS-K1-H6

Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705010R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705030R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray

E989NNJ-5-HD

Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray
PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray

A1212SC-G

PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray

Frequently Asked Questions

What is the wire size compatible with 54930BE?

The compatible wire size for the 54930BE is #8 AWG.

What material is used in the 54930BE?

The 54930BE is made of high conductivity copper.

What is the finish of the 54930BE?

The finish of the 54930BE is tin plated.

How to Install the 54930BE Compression Lugs

This guide provides step-by-step instructions for installing 54930BE compression lugs for secure electrical connections.

Estimated time: 30m

Tools needed:

Wire strippers, Crimping tool, Wire brush, Multimeter

Supplies needed:

Compression lugs, Wire connectors, Insulation tubing

  1. Strip the cable insulation

    Use wire strippers to remove the insulation from the cable to the length specified in the installation table. Avoid nicking the cable strands.

  2. Prepare the cable end

    Ensure the cable end is clean. Use a wire brush or emery cloth to clean it if necessary before proceeding.

  3. Insert the cable into the connector

    Insert the stripped end of the cable into the compression lug until it reaches the stop. The insertion length should match the stripped length.

  4. Crimp the connector

    Place the connector in the crimping tool and compress it according to the color-coded die instructions. Start near the tongue of the connector.

  5. Remove sharp edges

    After crimping, carefully remove any sharp edges, flash, or burrs from the connector to ensure a safe and secure connection.

  6. Insulate the connection

    Apply insulation methods as specified in the installation table to protect the connection from environmental factors.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.