Authorized ABB Distributor (Installation Products)
ABB - Installation Products 54115UF - Copper One-Hole Lug, 45 Degree Bend Standard Barrel, Peep Hole, Max 35kV, Wire Size 350 kcmil, 1/2 Inch Bolt Size, Tin Plated, Die Code 71, Die Color Code Red

ABB Installation Products 54115UF Copper One-Hole Lug, 45 Degree Bend Standard Barrel, Peep Hole, Max 35kV, Wire Size 350…

UPC: 786210869735


Documents & Media
Installation InstructionsSpecification SheetVideo ClipManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 54115UF is a tin-plated copper one-hole lug engineered for high-voltage electrical connections up to 35kV. This lug is constructed from high-conductivity copper, ensuring optimal electrical performance and minimal energy loss in demanding applications. The 45-degree bend standard barrel design facilitates efficient cable routing, reducing strain on conductors and improving installation flexibility in tight spaces. With a wire size capacity of 350 kcmil, it accommodates heavy-duty conductors commonly used in power distribution, substations, and industrial machinery. The 1/2-inch bolt size provides a secure mechanical connection, ensuring stable and reliable terminations under high electrical loads. The integrated peep hole allows for visual verification of proper wire insertion and crimping, ensuring compliance with installation standards and reducing the risk of faulty connections. The tin plating enhances conductivity by preventing oxidation and corrosion, which is critical for maintaining low contact resistance over extended service life in harsh environments. Identified by Die Code 71 and a red color code, this lug ensures easy identification during inventory management and installation, aligning with industry standards for electrical components. The copper construction delivers superior thermal and electrical performance, while the tin plating maintains durability and resistance to environmental factors such as moisture, chemicals, and temperature fluctuations. This lug is designed for utility-grade installations where long-lasting, high-reliability terminations are essential, making it suitable for critical power infrastructure applications. The combination of robust materials, precise engineering, and compliance with electrical standards positions the 54115UF as a dependable solution for high-voltage electrical connections.
  • Tin-plated copper construction for superior conductivity and corrosion resistance
  • Rated for 35kV applications with 350 kcmil wire capacity
  • 45-degree bend standard barrel for efficient cable routing
  • 1/2-inch bolt size with one-hole design for secure mounting
  • Peep hole for visual confirmation of wire insertion and crimping
  • Peep hole for visual inspection of connection
  • Die Code 71 and red color code for easy identification

Specifications

Cable Size
350 kcmil
Color
Red
Connection Type
One-Hole Lug
Insulation
None
Material
Copper
Material
Tin-Plated Copper
Material
Copper, Tin Plated
Mounting Type
45 Degree Bend, Peep Hole (for inspection)
Mounting Type
Crimp/Compression
Mounting Type
Bolt Mount
Mounting Type
Bolt
Number Of Holes
1
Series
54115
Series
54115UF
Series
ABB 54115UF
Size
350 kcmil, 1/2 Inch Bolt Size
Standard
UL E9809 / UL E9809
Standard
UL E9809
Stud Size
1/2 in
Type
Standard Barrel 45 Degree Bend
Voltage Rating
35 kV
Package Dimensions (L x W x H)
4 IN x 3 IN x 4 IN
Package Dimensions (L x W x H)
10.16 cm x 7.62 cm x 10.16 cm
Package Weight (Imperial)
0.210 L
Package Weight (Metric)
0.095 kg
Die for 12 Ton 13400 or 13642M Hydrualic Tool for Crimping 210214MT Dragon Tooth Terminals

13681

Die for 12 Ton 13400 or 13642M Hydrualic Tool for Crimping 210214MT Dragon Tooth Terminals
Hand Tool (Plier-Type) for Installing A, B, C, PT Non-insulated Terminals and Splices, Includes Plier Grip and Wire Cutter

WT161M

Hand Tool (Plier-Type) for Installing A, B, C, PT Non-insulated Terminals and Splices, Includes Plier Grip and Wire Cutter
15 Ton Hex Die, 125H, Stainless Steel

15603SS

15 Ton Hex Die, 125H, Stainless Steel
HYD POWER TOOL FOR CRIMPING RD-RM

13642M

HYD POWER TOOL FOR CRIMPING RD-RM
Non-Insulated Parallel Splice Connector For Wire Range #4 AWG, Circular Mil Range 33,100-52,600, Length 0.531 Diameter 0.41, Nickel Plated

F4-PS-W-NP

Non-Insulated Parallel Splice Connector For Wire Range #4 AWG, Circular Mil Range 33,100-52,600, Length 0.531 Diameter 0.41, Nickel Plated
Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

AS-K1-H6

Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray

A1212SC-G

PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray
Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray

E989NNJ-5-HD

Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705010R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705030R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

How to Install the 54115UF Connector

This guide provides step-by-step instructions for installing the 54115UF connector, ensuring proper crimping and insulation for reliable electrical connections.

Estimated time: 30m

Tools needed:

Wire strippers, Crimping tool, Multimeter

Supplies needed:

Connector lugs, Insulation materials (adhesive pads or shrink tubing), Cable

  1. Strip the cable

    Strip the insulation from the cable to the specified length as indicated in the installation table. Avoid nicking the cable strands to prevent breakage.

  2. Insert the cable into the connector

    Clean the cable end with a wire brush and insert it into the connector until it stops. Use the inspection peep hole to verify that the cable is fully inserted.

  3. Crimp the connector

    Place the connector in the crimping die and compress it according to the markings, starting near the tongue of the connector. Refer to the installation table for the required number of compressions.

  4. Remove sharp edges

    After crimping, carefully remove any sharp edges, flash, or burrs from the connector to ensure safety and proper installation.

  5. Insulate the connection

    Apply insulation to the crimped area using either adhesive pads or shrink tubing as specified in the installation table.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.