ABB Installation Products 151-SRC-40 200 Amp, 15/25kV, Replacement Contact. Wire Size 4/0.
UPC: 783786455201
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 200 Ampere current rating
- 15kV to 25kV voltage rating
- Accommodates 4/0 AWG wire size
- Manufactured by ABB - Installation Products
- Direct replacement contact for medium-voltage systems
Specifications
Application | 15/25 kV, 200 Amps |
Current Rating | 200 A |
Size | 4/0 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Straight Replacement Contact |
Voltage Rating | 15/25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
163-159
U Strap, for 15 kv Junction, 13 Gage Stainless Steel, 0.553 inch wide, 1.795 inch Tall with 1.38 inside span and 2.5 inch between Mounting holes. Holes are .343 inch Diameter.
160-226
Ring for Voltage Detector Contacts, Nylon, Outside Diameter 1.187 inch, Inside Diameter .895 inch. .38 inch thick
150-TB-6
15/25kV, 200 Amp Straight Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. Consists of (2) Bailing Rings, (2) Threaded J-Bolts, (2) Wing Nuts and Instruction Sheet.How to Install the Elastimold 151SR/K151SR Straight Receptacle
This guide provides step-by-step instructions for preparing the cable, crimping the conductor contact, and connecting the Elastimold 151SR/K151SR Straight Receptacle to a mating product or apparatus. Ensure all apparatus is de-energized before beginning installation.
Estimated time: 1h 30m
Tools needed:
Cable cutting tool, Cable stripping tool, Wire brush, Crimp tool, Rag, Approved solvent
Supplies needed:
151SR/K151SR Straight Receptacle, Conductor Contact (male), Nylon Venting Rod, Lubricant (supplied with product), Solid dielectric type cable, Inhibitor (for aluminum conductors), Elastimold bail, Silicone grease, Copper wire (#14 AWG or equivalent), Elastimold insulating plug (K150DP, optional)
- Prepare the Cable Jacket and Shield
Ensure all apparatus is de-energized during installation. Cut and remove the cable jacket 8 inches from the cable end for jacketed concentric neutral cables, or 7 1/2 inches for copper tape shield cables. For copper tape shield, remove the copper tape shield 6 1/2 inches from the cable end. Allow sufficient concentric neutral wires for connecting to the ground point as required.
- Prepare Conductor and Crimp Terminal
Remove 7/8 to 1 inch (or 1 3/4 to 1 7/8 inches for #1 and #1/0 stranded/compressed aluminum cable) of cable insulation and conductive shield. Wire brush bare aluminum conductors and immediately insert them into the crimp barrel which contains inhibitor. Cut the conductor squarely, do not pencil. Crimp the socket terminal onto the bared conductor, ensuring the conductor remains fully seated. Start crimps at the crimp line and rotate each successive crimp 90 degrees. Carefully wipe excess inhibitor from the contact and cable insulation if using aluminum cable.
- Clean Insulation and Lubricate Receptacle
Remove the semi-conductive shield to a point 7 9/16 to 7 5/8 inches back from the end of the pin with a straight, smooth, 'squared' cut, ensuring not to cut or nick the insulation. Pencil the insulation 1/8 inch. Clean the outer jacket and thoroughly clean the insulation to remove all traces of semi-conducting residue by wiping with a rag wet with an approved solvent, always wiping from the end of the cable toward the outer jacket. Remove the protective cap from the straight receptacle. Apply the supplied lubricant sparingly to the cable as shown and to the inside of the housing; do not substitute lubricants.
- Insert Cable into Receptacle Housing
Push the prepared cable into the receptacle housing until the base of the pin chamfer is flush with the inside face of the receptacle. IMPORTANT: If the receptacle is not to be immediately connected, replace the protective cover with an Elastimold insulating plug (K150DP) as the shipping cover offers protection from dirt only and is not an insulating device.
- Connect to a Mating Plug
Lubricate the nose of the mating plug with silicone grease. Place the nylon venting rod into the receptacle face until it bottoms (approximately 1 3/4 inches), taking care to ensure the nylon rod is not cut. Insert the mating plug assembly into the receptacle as far as possible. Pull out the nylon rod. Secure the electrical connection with the aid of an Elastimold bail. CAUTION: A bailing arrangement is required when this product is used with any mating Elastimold deadbreak product.
- Ground the Cable
If an Elastimold grounding device is not being used, connect a length of #14 AWG (or equivalent) copper wire (customer supplied) through the grounding tab and twist tightly as shown. Then, connect the grounding assembly of the connector to the system ground by merging with the cable shield of each cable. Seal the grounding wires and connections to prevent corrosion.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.