ABB Installation Products 151-SRC-20 200 Amp, 15/25kV, Replacement Contact. Wire Size 2/0.
UPC: 783786648795
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Rated for 200 Amps and 15/25kV medium-voltage applications
- Designed for 2/0 AWG copper conductors
- Compatible with 161/162LR, 261/262LR, 375/376LR, and 252LR elbows
- Copper construction resists arcing and wear
- Includes crimp chart (CC-0024) for installation guidance
Specifications
Application | 15/25 kV, 200 Amps |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Straight Replacement Contact |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.1100 L |
Package Weight (Metric) | 0.0500 kg |
150-TB-2
15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.
K600-DP
Plug, Dead-End, includes Basic Insulating Plug, 600 Amp Test Point Cap, 25 KV 600 Amp Stud, Protective Cap, Compound/Lube, Instruction Sheets2701US-1S
Prepack Hold Down Bracket for LoadBreak Junctions, includes Hold Down Strap, Hardware (Ext Tooth Lock Washer, Hex Head Cap Screw, Hex Nut), Installation Instructions, Label, Polyethylene Film.
Frequently Asked Questions
What is the voltage rating of the 151-SRC-20?
The 151-SRC-20 operates at 15/25kV, making it suitable for medium-voltage applications.
What wire size is compatible with this contact?
The contact is designed for 2/0 AWG wire, ensuring proper electrical connection.
What is the current rating of the 151-SRC-20?
The contact is rated for 200 Amps, suitable for high-load industrial applications.
Is this a direct replacement for existing ABB components?
Yes, the 151-SRC-20 is an OEM replacement contact for ABB switchgear assemblies.
Can this contact be used in outdoor switchgear?
The 151-SRC-20 is designed for indoor medium-voltage switchgear applications.
How to Install the 151SR/K151SR Straight Receptacle
This guide provides step-by-step instructions for installing the 151SR/K151SR Straight Receptacle, designed to connect solid dielectric type cables to other electrical apparatus or cables. Ensure all safety precautions are followed.
Estimated time: 1h 30m
Tools needed:
Cable cutting tool, Cable stripping tool, Wire brush, Crimp tool, Rag, Approved solvent
Supplies needed:
151SR/K151SR Straight Receptacle kit (includes conductor contact, nylon venting rod, lubricant), Elastimold bail, #14 AWG (or equivalent) copper wire, Silicone grease, Elastimold insulating plug (K150DP, if not immediately connecting)
- Prepare the Cable Jacket
DANGER: Ensure all apparatus is de-energized before beginning installation. Failure to do so can result in serious injury or death. For jacketed concentric neutral cable, cut and remove the cable jacket 8 inches from the cable end. Ensure sufficient neutral wires remain for grounding. For copper tape shield cable, cut and remove the cable jacket 7 1/2 inches from the cable end. Then, remove the copper tape shield 6 1/2 inches from the cable end. (Note: If using an ECS or MA grounding device, follow its specific instructions for outer jacket cut back).
- Remove Insulation and Conductive Shield
Remove 7/8 to 1 inch of cable insulation and conductive shield. For #1 stranded/compressed and #1/0 compressed/solid aluminum cable, remove 1 3/4 to 1 7/8 inches. Cut squarely; do not pencil the cut. Wire brush bare aluminum conductors immediately after stripping.
- Crimp the Conductor Contact
Immediately insert the wire-brushed conductor into the crimp barrel, ensuring it is fully seated. The crimp barrel contains inhibitor. Crimp the socket terminal onto the bared conductor. Start crimps at the crimp line imprinted on the barrel and rotate each successive crimp or indent 90 degrees. Refer to the crimp chart provided with the contact. If using aluminum cable, carefully wipe any excess inhibitor from the contact and cable insulation.
- Prepare and Clean the Cable Insulation
Remove the semi-conductive shield to a point 7 9/16 to 7 5/8 inches back from the end of the pin with a straight, smooth, 'squared' cut. DO NOT CUT OR NICK THE INSULATION. Pencil the insulation 1/8 inch. Clean the outer jacket and thoroughly clean the insulation to remove all traces of semi-conducting residue. Wipe with a rag wet with an approved solvent, always wiping from the end of the cable toward the outer jacket. If using an ECS or MA grounding device, install it now following its specific instructions.
- Lubricate the Receptacle and Cable
Remove the protective cap from the straight receptacle, keeping the cable insulation and receptacle clean. Apply the supplied lubricant sparingly to the cable (at the end of the insulation) and to the inside of the receptacle housing. DO NOT SUBSTITUTE other lubricants, as they may harm the product or its mating product.
- Insert Cable into the Receptacle Housing
Push the cable into the receptacle housing until the base of the pin chamfer is flush with the inside face of the receptacle. IMPORTANT: If the receptacle is not to be immediately connected, replace the protective cover. Note that the shipping cover only offers protection from dirt and is NOT an insulating device. If insulation is required, obtain an Elastimold insulating plug (K150DP).
- Connect to a Mating Plug (Optional)
Lubricate the nose of the mating plug with silicone grease. Place the nylon rod into the receptacle face until it bottoms (approximately 1 3/4 inches). Ensure the nylon rod is not cut during mating. Insert the mating plug assembly into the receptacle as far as possible. Pull out the nylon rod. Secure the electrical connection with an Elastimold bail. CAUTION: A bailing arrangement is required when this product is used with any mating Elastimold deadbreak product.
- Ground the Cable
If an ELASTIMOLD grounding device is not being used, connect a length of customer-supplied #14 AWG (or equivalent) copper wire through the grounding tab and twist tightly. Connect this grounding assembly of the connector to the system ground by merging it with the cable shield of each cable. Seal the grounding wires and connections to prevent corrosion.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.