Contact for Pricing
Overview
- 200 Amp continuous current rating for medium-voltage applications
- Bi-metal construction compatible with copper and aluminum conductors
- Supports stranded/compressed (240-1/0 AWG) or solid/compact (2/0 AWG) conductors
- 4 NO main contacts + 2 auxiliary contacts (NO/NC) for flexible switching
- Rated for 690V operational voltage and 3000m maximum altitude
Specifications
Amperage Rating | 200 A |
Connection | Compression |
Connection Type | Loadbreak LR |
Current Rating | 200 A |
Housing Material | Bi-Metal |
Material | Bi-Metal |
Series | Loadbreak LR |
Size | 240 - 1/0 Stranded/Compressed or 2/0 Solid/Compact |
Special Features | CSA Die Chart |
Type | Contact Long |
Voltage Rating | 15 to 35 kV |
Voltage Rating | 15-35 kV |
Wire Size | 1/0 STR/COMPR AWG , 2/0 SOL/COMPT AWG |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.1300 L |
Package Weight (Metric) | 0.0590 kg |
13682
Die for 12 Ton 13400 or 13642M Hydrualic Tool for Crimping 204210MT Dragon Tooth Terminals, Brown. .301/.289 Gaging
RDC1/0
Ratchet Drive Crimping Tool APPLICATIONS: Ratchet Drive Crimping Tool is for non-insulated terminals from 6 to 1/0 AWG and insulated terminals from 22 to 8 AWG. Rugged, compact, and lightweight. Requires minimum effort due to ratchet action, ensuring an excellent crimp every time. FEATURES: TYPE: Insulated and Uninsulated ACTION: Ratchet INSULATED USE: Terminals 22 to 8 AWG NON-INSULATED USE: Terminals 6 to 1/0 AWG MANUFACTURER: NSi Industries PART NUMBER: RDC 1/0 UPC: 662381055309
CD6A
U-Type Compression Die - Pink 1/0 AWG Copper - 2 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
F4-PS-W-NP
Non-Insulated Parallel Splice Connector For Wire Range #4 AWG, Circular Mil Range 33,100-52,600, Length 0.531 Diameter 0.41, Nickel Plated
AS-K1-H6
Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
1SNK705010R0000
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
1SNK705030R0000
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
E989NNJ-5-HD
Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray
Frequently Asked Questions
What elbows are compatible with 02500XXX units?
02500XXX units are designed for use with 161/162LR, 261/262LR, 375/376LR, and 252LR elbows.
What conductor types are compatible with 02500XXX connectors?
These connectors are designed for use with both aluminum and copper conductors.
What materials are 02500XXX connectors made from?
02500XXX bi-metallic connectors have a copper tip section and a universal aluminum crimp barrel.
What conductor sizes fit the 02500240 connector?
The 02500240 connector fits 1/0 AWG stranded/compressed and 2/0 AWG solid/compressed bi-metal conductors.
What items are included in the 02500XXX kit?
Each kit contains one 02500XXX connector and one Crimp Chart CC-0020.
What is the 02500240 product?
The 02500240 is a 200A Loadbreak Long Bi-Metal Contact connector.
What materials are 02500XXX connectors made from?
02500XXX bi-metallic connectors have a copper tip section and a universal aluminum crimp barrel.
What elbows are compatible with 02500XXX units?
02500XXX units are designed for use with 161/162LR, 261/262LR, 375/376LR, and 252LR elbows.
What conductor types are compatible with 02500XXX connectors?
These connectors are designed for use with both aluminum and copper conductors.
What conductor sizes fit the 02500240 connector?
The 02500240 connector fits 1/0 AWG stranded/compressed and 2/0 AWG solid/compressed bi-metal conductors.
How to Install the 252LR Deadbreak Elbow Connector
This guide provides step-by-step instructions for installing the Elastimold 252LR Deadbreak Elbow Connector, designed to terminate UD cable with concentric neutral and semi-con shielding. It covers cable preparation, elbow assembly, and connection to a 25kV class deadbreak bushing.
Estimated time: 1h 30m
Tools needed:
Wrench, Wire brush, Crimp tool, Hot stick, Wire strippers
Supplies needed:
252LR Elbow Connector Housing, Compression Lug, Probe, Probe Contact, Lubricant (supplied), Hold-down Bail, No. 14 AWG / 2.5mm copper wire, Appropriate ground connector, UD cable, Elastimold 25kV class 200 ampere deadbreak bushing or accessory device
- Perform Initial Safety Checks and Prepare Components
DANGER: Ensure all apparatus is de-energized before starting installation. Do not touch or move energized products. Inspect all parts for damage, rating, and compatibility with mating parts. Verify the elbow housing cable entrance size and compression lug size match your cable. Check probe threads by hand-threading into the compression lug; replace damaged components if resistance is encountered. Have all required tools ready and maintain cleanliness throughout the procedure.
- Train the Cable
Train the UD cable to ease operation, ensuring a minimum of 20 inches (508.0mm) extends beyond the end of the cable pad mount transformer. Cut any excess cable squarely at the center line of the bushing.
- Prepare the Cable End
Unwrap and bind concentric neutral wires 8-1/2 inches (216.0mm) back from the cable end. Remove the shield and insulation squarely, taking care not to nick the conductor. Wire brush bare aluminum conductors and immediately install the compression lug, rotating to spread inhibitor. Align the lug's threaded hole with the bushing bore and crimp according to the crimp chart, rotating 180 degrees for each successive crimp. Carefully wipe off excessive inhibitor. Remove the semi-con shield and bevel the insulation end 1/8 inch (3.2mm) maximum. Thoroughly clean the insulation to remove all traces of conductive residue.
- Assemble the Elbow Connector
Clean and lubricate the cable insulation and the inside of the elbow housing with the supplied lubricant; do not substitute. Slide the elbow connector onto the cable using a back and forth twisting motion, then wipe off all excess silicone lubricant. Align the elbow with the compression lug’s threaded hole. Thread the probe into the lug by hand, ensuring not to cross-thread. Tighten the probe with a wrench until the wrench bends.
- Assemble the Hold-down Bail
Place the hold-down bail into the hold-down bracket. Compress the bail and insert it securely into the brackets.
- Connect the Concentric Neutral
Insert one end of a separate No. 14 AWG (2.5mm) copper wire through the grounding eye on the elbow and twist tightly. Twist all neutral wires together and connect them to ground using an appropriate connector. Ensure adequate slack in the wires for elbow operation.
- Connect Elbow to Bushing Plug
Clean the receptacle portion of the elbow connector and the mating bushing, and lubricate with the supplied lubricant ONLY if both the transformer and elbow are known to be de-energized. Use a fully insulated hot stick to place the elbow onto the bushing. DANGER: Do not operate by hand or separate if energized.
- Secure the Elbow with the Bail
Pull the hold-down bail up over the crown or top of the elbow so that the eyebolt on the bail is directly over the operating eye. Tighten down on the elbow locator by turning the eyebolt clockwise. Adjust the nut on the eyebolt to allow it to seat securely in the locator, acting as a stop to prevent excessive force on the elbow. Once set, the nut will not require readjustment for future removal/replacement.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.