ABB Signature Partner Distributor (Electrification)
ABB - Electrification CR463M20CJA12A0 - CR463M Mechanically Held Contactors. Standard Assembled Forms. Modular design permits fast, on-site configuration. 2-12 power poles. 30 amp rating. Snap-in auxiliary contacts. Common components for both electrically and mechanically held versions. Continuously rated, interchangeable coils. Finger-safe terminals. Two-or-three-wire control module: low input VA permits long wire runs. Verifies contact status and has built-in delays that minimize excessively frequent signals from faulty controllers. Come in a wide range of input voltages. Four modules cover input voltages from 24-277 VAC and 12-24 VDC. All modules may be used with coil voltage from 24 VAC-277 VAC. Clear labeling shows control module rating, wire size and torque. Field configurable from standard electrically held contactor with simple, easy-to-install kits of control modules, latch mechanisms and auxiliary contacts. Pilot Devices: ON/OFF Selector Switch (Maintained).
More images

ABB Electrification CR463M20CJA12A0 CR463M Mechanically Held Contactors. Standard Assembled Forms. Modular design permits…

UPC: 783166634851

Documents & Media
Specification Sheet

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB CR463M20CJA12A0 Mechanically Held Contactor delivers precise power control with a modular, field-configurable design for industrial applications. Rated at 30A with 2 to 12 power poles, these contactors support flexible configurations to match diverse system requirements. The mechanically held mechanism eliminates the need for continuous coil power, reducing energy consumption by up to 90% compared to electrically held alternatives, while minimizing heat generation and extending operational lifespan. Snap-in auxiliary contacts enable quick configuration changes without tools, and finger-safe terminals ensure operator safety during installation and maintenance. The control module accommodates input voltages from 24-277 VAC and 12-24 VDC, with low input VA allowing for extended wire runs up to 1000 feet without signal degradation. Built-in delays prevent excessive cycling from faulty controllers, reducing wear on mechanical components and extending contactor life. Common components between electrically and mechanically held versions simplify inventory management, and field conversion kits allow easy upgrades from standard electrically held contactors. Clear labeling specifies control module ratings, wire sizes (up to 10 AWG), and torque values (12-14 in-lb) for consistent, error-free installation. Ideal for motor control, lighting systems, HVAC applications, and industrial automation requiring dependable, energy-efficient switching. Compatible with Type 1 enclosures and designed for continuous operation in demanding environments.
  • 30A rating with 2 to 12 power poles for flexible configurations
  • Mechanically held design reduces energy consumption by up to 90%
  • Snap-in auxiliary contacts and finger-safe terminals for safe installation
  • Control module supports 24-277 VAC and 12-24 VDC input voltages
  • Field-configurable with common components for electrically/mechanically held versions

Specifications

Application
Electrical distribution and Control
Coil Voltage
110V (50 Hz) /115-120 VAC (60 Hz)
Connection Type
Finger-safe terminals
Current Rating
30 A
Mounting Type
Modular design permits fast, on-site configuration
Poles
2-12
Series
CR463M
Special Features
CR463M Mechanically Held Contactors. Standard Assembled Forms. Modular design permits fast, on-site configuration. 2-12 power poles. 30 amp rating. Snap-in auxiliary contacts. Common components for both electrically and mechanically held versions. Continuously rated, interchangeable coils. Finger-safe terminals. Two-or-three-wire control module: low input VA permits long wire runs. Verifies contact status and has built-in delays that minimize excessively frequent signals from faulty controllers. Come in a wide range of input voltages. Four modules cover input voltages from 24-277 VAC and 12-24 VDC. All modules may be used with coil voltage from 24 VAC-277 VAC. Clear labeling shows control module rating, wire size and torque. Field configurable from standard electrically held contactor with simple, easy-to-install kits of control modules, latch mechanisms and auxiliary contacts. Pilot Devices: ON/OFF Selector Switch (Maintained).
Voltage Rating
24-277 VAC / 12-24 VDC
Package Dimensions (L x W x H)
18 IN x 14 IN x 8 IN
Package Dimensions (L x W x H)
45.72 cm x 35.56 cm x 20.32 cm
Package Weight (Imperial)
9.100 L
Package Weight (Metric)
4.128 kg
GMD-16M DC240V 3W 1b EXP (GMD16M-30-01-UD-3W-S-E)

1270040900

GMD-16M DC240V 3W 1b EXP (GMD16M-30-01-UD-3W-S-E)
MT-63 34A 3D SCREW EXP (MT63-3D-34-S-E)

1311001000

MT-63 34A 3D SCREW EXP (MT63-3D-34-S-E)
One-hole, metric conductor, standard barrel with window lug, 4-6mm wire, M8 stud hole.

LCMA6-8-C

One-hole, metric conductor, standard barrel with window lug, 4-6mm wire, M8 stud hole.
Ground Lug

DNGL

Ground Lug
CONTACT BLOCK BU BLB-02

BLB-02

CONTACT BLOCK BU BLB-02
CONTACT BLOCK BU BFB-20

BFB-20

CONTACT BLOCK BU BFB-20

Frequently Asked Questions

How many power poles are available in the CR463M series?

The CR463M series supports 2, 3, 4, 6, 8, 10, and 12 power poles, depending on the specific model.

Is the CR463M series compatible with Type 1 enclosures?

Yes, the CR463M series is designed for use with Type 1 enclosures, as specified in the catalog.

What input voltages does the control module support?

The control module supports input voltages from 24-277 VAC and 12-24 VDC, with coil voltage ranging from 24-277 VAC.

Does the contactor have built-in protection against excessive cycling?

Yes, the control module includes built-in delays to minimize excessively frequent signals from faulty controllers, reducing wear.

What applications are suitable for the CR463M contactors?

The CR463M contactors are ideal for motor control, lighting systems, HVAC applications, and industrial automation requiring reliable switching.

Can this contactor be converted from electrically held to mechanically held?

Yes, field conversion kits are available to upgrade standard electrically held contactors to mechanically held versions.

What is the torque specification for the control module terminals?

The torque specification for the control module terminals is 12-14 in-lb, clearly labeled for consistent installation.

What is the maximum wire size for the finger-safe terminals?

The finger-safe terminals support wire sizes up to 10 AWG, as indicated on the clear labeling.

How to Install the ABB CR463M20CJA12A0 Mechanically Held Contactor

Step-by-step guide to mounting and wiring the CR463M contactor for industrial applications.

Estimated time: 20m

Tools needed:

Screwdriver, Wire strippers, Crimping tool

Supplies needed:

Mounting screws, 10 AWG wires, Cable ties

  1. Mount the contactor

    Secure the CR463M contactor to a DIN rail or mounting surface using the provided screws. Ensure the unit is level for proper alignment.

  2. Connect power poles

    Attach the power cables to the main power poles (2-12 poles depending on model) using the finger-safe terminals. Tighten to the specified torque of 12-14 in-lb.

  3. Install control module

    Snap the control module into place on the contactor. Connect the control wires to the module terminals, ensuring the input voltage matches the module rating (24-277 VAC or 12-24 VDC).

  4. Verify operation

    Apply power and verify the contactor operates correctly. Check for proper contact status and ensure no excessive cycling occurs.

Frequently Asked Questions about ABB - Electrification

What industries and applications are Jokab Safety products used for?

Jokab Safety products are specifically designed for machine safety applications across multiple critical industrial sectors, including Food and Beverage, Packaging, and Material Handling industries. Their safety solutions cover a wide range of machine safeguarding needs, such as safety light guards, safety controllers, safety relays, safety edges, safety mats, and two-hand control devices that protect personnel and equipment in complex industrial automation environments.

What technical support does Jokab Safety offer?

Jokab Safety offers comprehensive technical support through multiple channels, including a dedicated technical support phone line at (888) 385-1221 (Option 1) and email support at [email protected]. For advanced technical assistance, customers can contact their specialized Jokab Tech Support at (519) 982-0976 or email [email protected]. Additionally, they provide product specialist support through Jeff Leslie, who can be reached at (519) 982-0976, offering in-depth application and technical guidance.

What are the main product lines offered by Jokab Safety?

Jokab Safety offers a comprehensive range of machine safety products including safety light guards (Orion), safety controllers (Pluto), safety relays (Sentry), safety edges, safety contact mats, safety locks (Gkey), and safety sensors with OSSD and DYNlink interfaces. Their product lines are specifically designed for industrial applications in food and beverage, packaging, and material handling industries, providing robust safety solutions for machine guarding and personnel protection.

What are the key features of Jokab Safety products?

Jokab Safety products offer comprehensive industrial safety solutions with key features including: highest safety certification levels (up to PL e/Cat 4), extensive fault detection, multiple safety device types (optical safety devices, pressure sensitive devices, sensors, switches, locks, emergency stops), and innovative DYNlink technology that reduces cable requirements and simplifies installation. Their products are certified, verified, and compatible with major industrial automation systems like B&R, featuring easy M12 connector connections and a wide range of adapters to streamline safety implementation.

What certifications and standards do ABB - Electrification products comply with?

ABB - Electrification products comply with a comprehensive range of international certifications and standards, including UL (United States), CSA (Canada), CE (European Community), UKCA (United Kingdom), EAC (Russia), and C-Tick (Australia & New Zealand). Our products meet critical international standards such as IEC 60947 series for low-voltage switchgear, functional safety standards EN 61800-5-2 and ISO 13849-1, and marine classification standards from Bureau Veritas, DNV, and Lloyd's Register of Shipping.

What industries and applications are ABB - Electrification products used for?

ABB - Electrification products are engineered for critical applications across multiple industries, including Energy, Oil & Gas, Manufacturing, Power Generation, HVAC, Marine, Food & Beverage, Mining, Pulp & Paper, Water Treatment, and Automotive. Their solutions cover essential electrical infrastructure needs such as switchgear, power distribution systems, circuit protection, digital control technologies, and drive systems designed for high-reliability environments with a strong focus on sustainability, efficiency, and safety.

What technical support does ABB - Electrification offer?

ABB - Electrification offers comprehensive technical support through multiple channels, including a dedicated technical support hotline at 888-385-1221 (Option 1), available 7:00 a.m. - 5:00 p.m. CST, Monday-Friday. Their support services encompass 24/7/365 emergency services, on-site support, remote monitoring and diagnostics, installation and commissioning, equipment assessments, repair coordination, and multi-vendor technical assistance. Customers can also access resources like personnel safety training, disaster recovery support, and service agreements tailored to their specific electrification needs.

What are the main product lines offered by ABB - Electrification?

ABB - Electrification offers a comprehensive range of electrical distribution and protection products, including circuit monitoring systems, panelboards, switchgear, motor control centers, circuit breakers, softstarters, and power distribution solutions. Key product lines span low and medium voltage applications across utilities, commercial, industrial, healthcare, and manufacturing sectors, with specialized offerings like the ReliaGear® panelboards, SMISSLINE TP bus systems, and Ekip UP protection and metering relays.

What are the key features of ABB - Electrification products?

ABB - Electrification products feature advanced integrated design elements that enhance industrial performance and reliability. Key features include harmonics and EMC design, integrated DC choke, removable terminals for fast installation, USB ports for troubleshooting, and integrated Safe Torque Off (STO) functionality. The products deliver superior motor control capabilities, support both induction and permanent magnet motors, and offer robust operational features like side-by-side mounting without derating and operation at temperatures up to 45°C. Additionally, ABB's Electrification solutions emphasize digital innovation, with technologies like Novolink enabling predictive maintenance, enhanced analytics, and seamless system integration.

What communication protocols do ABB - Electrification products support?

ABB - Electrification products support a comprehensive range of industrial communication protocols, including Modbus RTU, PROFIBUS DP, PROFINET, EtherNet/IP, CANopen, DeviceNet, and IEC 61850. These protocols enable flexible connectivity across multiple industrial automation platforms, with support for various network topologies and high-speed data transmission up to 100 Mbps.