ABB - Electrification 9T17C0015 - ABB's Servicenter™ Three-Phase Integral Transformer and Distribution Panel system meets DOE 2016 efficiency standards. The Servicenter system comes equipped with the rightly sized circuit breakers for both the primary and secondary transformer windings. Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022. Available with aluminum or copper windings. The transformer utilizes a UL recognized 220 °C insulation system. Quiet Performance as core and coil assemblies are mounted on rubber isolation pads to reduce noise. Robust packaging with top and side protection protects against shipping damage. Accessible mounting flanges with front/back slotted mounting holes make installation easier. NEMA 3R enclosure when the included rain shields are installed. Clear, comprehensive documentation and labeling. The Servicenter system is UL Listed.
ABB - Electrification

9T17C0015

UPC: 783173905180

Contact for Pricing

Overview

The ABB Servicenter™ Three-Phase Integral Transformer and Distribution Panel system (SKU: 9T17C0015) is engineered for reliable power distribution in industrial and temporary power applications. This integrated unit combines a Type QL three-phase transformer with primary and secondary main circuit breakers and a load-center-design breaker panel, significantly reducing installation time and costs. It meets DOE 2016 efficiency standards, ensuring optimal energy performance. The transformer features a UL recognized 220 °C insulation system with a 150°C rise, and is available with either aluminum or copper windings. For quiet operation, the core and coil assemblies are mounted on rubber isolation pads. This system is qualified to the seismic requirements of IEEE-693-2005, IBC-2021, and CBC 2022, making it suitable for demanding environments. The robust packaging includes top and side protection to prevent shipping damage. Installation is simplified with accessible mounting flanges featuring front/back slotted mounting holes. When the included rain shields are installed, the enclosure achieves NEMA 3R rating, allowing for indoor and outdoor use. The load center interior is the rugged ABB ReliaHome™, offering a 10 kAIC rating and copper bus. All Servicenters™ come equipped with factory-installed and wired, properly sized primary main and secondary main circuit breakers. Branch breakers are not included. The Servicenter system is UL Listed to UL 1062 (YEFR:E75204), providing assurance of quality and safety. Clear, comprehensive documentation and labeling are provided for ease of use and maintenance. This specific model is rated for 480 Volts Delta input and 208Y/120 Volts output, with a 30 kVA rating, 90A primary main breaker, and 100A secondary main breaker. It offers 24 branch spaces, with 8 two-pole spaces and 24 one-pole spaces.
  • Meets DOE 2016 efficiency standards
  • Qualified to IEEE-693-2005, IBC-2021, CBC 2022 seismic requirements
  • UL recognized 220 °C insulation system with 150°C rise
  • Quiet operation with rubber isolation pads
  • NEMA 3R enclosure with included rain shields

Specifications

Efficiency
DOE 2016
Frequency Rating
60 HZ
KVA Rating
22.5 KVA
Phase
3
Primary Voltage
480 VAC
Secondary Voltage
208Y/120
Special Features
ABB's Three Phase Servicenter™: Integral Transformer and Distribution Panel is a convenient, economical way to meet your industrial and temporary power requirements. This unit incorporates a Type QL transformer (three phase), a primary main circuit breaker, a secondary main circuit breaker, and a load center style breaker panel. Everything is factory installed, saving the contractor time and money. This Servicenter™ can be used wherever 240 Volt, 480 Volt or 600 Volt primary is available and 208Y/120 Volt secondary circuits are required.
Temperature Rating
40 °C
Package Dimensions (L x W x H)
29 IN x 29 IN x 40.5 IN
Package Dimensions (L x W x H)
73.66 cm x 73.66 cm x 102.87 cm
Package Weight (Imperial)
353.000 L
Package Weight (Metric)
160.121 kg
ABB's Low-Noise Low-Voltage General Purpose Dry-Type transformers also come in variants that allow for lower than standard (NEMA ST-20) audible noise levels and are UL Listed.  Ideally suited for installations where a transformers inherent audible noise needs to be as low as possible. They are availabel with either a -3dB or -5dB levels of noise reduction. Our Type QL & QF low-noise transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service.Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.

9T10A1004G62

ABB's Low-Noise Low-Voltage General Purpose Dry-Type transformers also come in variants that allow for lower than standard (NEMA ST-20) audible noise levels and are UL Listed.  Ideally suited for installations where a transformers inherent audible noise needs to be as low as possible. They are availabel with either a -3dB or -5dB levels of noise reduction. Our Type QL & QF low-noise transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service.Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.
ABB Low-Voltage General Purpose Dry-Type transformers are built to last more than 20 years and are UL Listed.  Our Type QL & QF transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service. Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.

9T10A1001G61

ABB Low-Voltage General Purpose Dry-Type transformers are built to last more than 20 years and are UL Listed.  Our Type QL & QF transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service. Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.
ABB’s K-Factor transformers are designed to withstand the additional heating that accompanies the presence of harmonics in electrical systems. K-Factor transformers are designed not to eliminate harmonics, but to withstand their negative effects. They are available with aluminum or copper windings and in all three temperature rise ratings. K-Factor transformers meet DOE 2016 efficiency standards and are UL Listed and Energy Verified. Qualified to the seismic requirements of IEEE-693-2005 and the IBC-2021 and CBC 2022.

9T14C1004G03

ABB’s K-Factor transformers are designed to withstand the additional heating that accompanies the presence of harmonics in electrical systems. K-Factor transformers are designed not to eliminate harmonics, but to withstand their negative effects. They are available with aluminum or copper windings and in all three temperature rise ratings. K-Factor transformers meet DOE 2016 efficiency standards and are UL Listed and Energy Verified. Qualified to the seismic requirements of IEEE-693-2005 and the IBC-2021 and CBC 2022.
ABB's Low-Noise Low-Voltage General Purpose Dry-Type transformers also come in variants that allow for lower than standard (NEMA ST-20) audible noise levels and are UL Listed.  Ideally suited for installations where a transformers inherent audible noise needs to be as low as possible. They are availabel with either a -3dB or -5dB levels of noise reduction. Our Type QL & QF low-noise transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service.Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.

9T10C1009G02

ABB's Low-Noise Low-Voltage General Purpose Dry-Type transformers also come in variants that allow for lower than standard (NEMA ST-20) audible noise levels and are UL Listed.  Ideally suited for installations where a transformers inherent audible noise needs to be as low as possible. They are availabel with either a -3dB or -5dB levels of noise reduction. Our Type QL & QF low-noise transformers meet DOE 2016 efficiency standards and are UL Energy Verified as energy efficient. They are available with aluminum or copper windings and in all three temperature rise ratings. Core and coil assemblies are mounted on rubber isolation pads to reduce noise. Single-piece front/back is easily removable for installation and service.Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022.
ABB’s K-Factor transformers are designed to withstand the additional heating that accompanies the presence of harmonics in electrical systems. K-Factor transformers are designed not to eliminate harmonics, but to withstand their negative effects. They are available with aluminum or copper windings and in all three temperature rise ratings. K-Factor transformers meet DOE 2016 efficiency standards and are UL Listed and Energy Verified. Qualified to the seismic requirements of IEEE-693-2005 and the IBC-2021 and CBC 2022.

9T14A1002G03

ABB’s K-Factor transformers are designed to withstand the additional heating that accompanies the presence of harmonics in electrical systems. K-Factor transformers are designed not to eliminate harmonics, but to withstand their negative effects. They are available with aluminum or copper windings and in all three temperature rise ratings. K-Factor transformers meet DOE 2016 efficiency standards and are UL Listed and Energy Verified. Qualified to the seismic requirements of IEEE-693-2005 and the IBC-2021 and CBC 2022.

Frequently Asked Questions about ABB - Electrification

What certifications and standards do ABB - Electrification products comply with?

ABB - Electrification products comply with a comprehensive range of international certifications and standards, including UL (United States), CSA (Canada), CE (European Community), UKCA (United Kingdom), EAC (Russia), and C-Tick (Australia & New Zealand). Our products meet critical international standards such as IEC 60947 series for low-voltage switchgear, functional safety standards EN 61800-5-2 and ISO 13849-1, and marine classification standards from Bureau Veritas, DNV, and Lloyd's Register of Shipping.

What industries and applications are ABB - Electrification products used for?

ABB - Electrification products are engineered for critical applications across multiple industries, including Energy, Oil & Gas, Manufacturing, Power Generation, HVAC, Marine, Food & Beverage, Mining, Pulp & Paper, Water Treatment, and Automotive. Their solutions cover essential electrical infrastructure needs such as switchgear, power distribution systems, circuit protection, digital control technologies, and drive systems designed for high-reliability environments with a strong focus on sustainability, efficiency, and safety.

What technical support does ABB - Electrification offer?

ABB - Electrification offers comprehensive technical support through multiple channels, including a dedicated technical support hotline at 888-385-1221 (Option 1), available 7:00 a.m. - 5:00 p.m. CST, Monday-Friday. Their support services encompass 24/7/365 emergency services, on-site support, remote monitoring and diagnostics, installation and commissioning, equipment assessments, repair coordination, and multi-vendor technical assistance. Customers can also access resources like personnel safety training, disaster recovery support, and service agreements tailored to their specific electrification needs.

What are the main product lines offered by ABB - Electrification?

ABB - Electrification offers a comprehensive range of electrical distribution and protection products, including circuit monitoring systems, panelboards, switchgear, motor control centers, circuit breakers, softstarters, and power distribution solutions. Key product lines span low and medium voltage applications across utilities, commercial, industrial, healthcare, and manufacturing sectors, with specialized offerings like the ReliaGear® panelboards, SMISSLINE TP bus systems, and Ekip UP protection and metering relays.

What are the key features of ABB - Electrification products?

ABB - Electrification products feature advanced integrated design elements that enhance industrial performance and reliability. Key features include harmonics and EMC design, integrated DC choke, removable terminals for fast installation, USB ports for troubleshooting, and integrated Safe Torque Off (STO) functionality. The products deliver superior motor control capabilities, support both induction and permanent magnet motors, and offer robust operational features like side-by-side mounting without derating and operation at temperatures up to 45°C. Additionally, ABB's Electrification solutions emphasize digital innovation, with technologies like Novolink enabling predictive maintenance, enhanced analytics, and seamless system integration.

What communication protocols do ABB - Electrification products support?

ABB - Electrification products support a comprehensive range of industrial communication protocols, including Modbus RTU, PROFIBUS DP, PROFINET, EtherNet/IP, CANopen, DeviceNet, and IEC 61850. These protocols enable flexible connectivity across multiple industrial automation platforms, with support for various network topologies and high-speed data transmission up to 100 Mbps.

What environmental ratings do ABB - Electrification products have?

ABB - Electrification products feature robust environmental ratings across multiple standards, including IP54 to IP66 protection levels and NEMA Type 1 to Type 4X enclosures. These ratings ensure equipment can withstand challenging industrial environments, providing dust-tight, water-resistant, and corrosion-resistant protection for indoor and outdoor applications.

What accessories are available for ABB - Electrification products?

ABB - Electrification offers a comprehensive range of accessories across multiple product lines, including auxiliary contact blocks, signaling contacts, shunt trips, undervoltage releases, electronic timers, interlocks, interface relays, mounting pieces, terminal blocks, and connection accessories. These accessories are designed to enhance functionality, improve connectivity, and provide additional protection for industrial control systems, with many accessories being compatible with SMISSLINE TP plug-in distribution systems and Unifix AD busbar systems.

How are ABB - Electrification products typically installed?

ABB - Electrification products are installed through a professional, systematic process that includes precise equipment verification, secure electrical connections, and comprehensive testing. Installation typically involves verifying foundation requirements, assembling equipment, connecting busbars and control cables, establishing earthing systems, and conducting thorough pre-commissioning and commissioning tests to ensure optimal performance, reliability, and safety.

What is ABB - Electrification's warranty policy?

ABB - Electrification offers a standard 1-year factory warranty for most electrification products, with options to extend warranty coverage up to 5 years for specific product lines like low voltage circuit breakers. Extended warranty requires online registration through ABB's Extended Warranty Tool, which verifies the product application and provides additional coverage for manufacturing defects and factory-mounted accessories.